Opens in a new tab

DS26LV32ATMX

Quad RS-422 Differential Receiver, 3-5.5V, 32MHz, Fail-Safe, SOIC-16

3456

Effective Inventory

Image for reference only

Manufacturer Part:

DS26LV32ATMX

Package:

SOIC-16 (9.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DS26LV32ATMX from Texas Instruments is a quad differential line receiver with 3V to 5.5V supply, 32MHz switching, and fail-safe inputs in a SOIC-16 package.

Key Specifications

Type Quad Differential Line Receiver (RS-422/RS-423)
Channels 4
Supply Voltage 3.0 V to 5.5 V
Data Rate 32 MHz
Input Sensitivity +/-200 mV
Common-Mode Range -0.2V to (VCC-0.2V)
Output CMOS/TTL compatible
Fail-Safe Open/short input defaults to HIGH output
Propagation Delay 22 ns (typical)
Package SOIC-16
Operating Temperature -40C to +85C

Features

  • 4 independent differential receivers
  • 3V to 5.5V single supply operation
  • 32 MHz data rate
  • +/-200mV input sensitivity
  • Fail-safe: open or shorted inputs produce HIGH output
  • CMOS/TTL compatible outputs
  • Compliant with RS-422 and RS-423 standards

Applications

  • RS-422/RS-485 communication receivers
  • Differential bus receivers
  • Point-to-point and multipoint data links
  • Low-voltage digital communication
Product Introduction: DS26LV32ATMX Product Introduction

The DS26LV32ATMX from Texas Instruments is a quad differential line receiver designed for RS-422 and RS-423 communication standards, operating from a 3V to 5.5V single supply. The device contains four independent differential receivers, each converting a differential input signal to a single-ended CMOS/TTL output. The +/-200mV input sensitivity complies with RS-422 specifications, and the wide common-mode range (-0.2V to VCC-0.2V) provides noise immunity in noisy industrial environments. The fail-safe feature ensures that open-circuited or short-circuited inputs produce a logic HIGH output, preventing undefined states on the bus. The 32 MHz data rate supports high-speed communication links. The device is pin-compatible with the industry-standard DS26LS32 and AM26LS32 but with lower voltage operation capability.

Working Principle: DS26LV32ATMX Working Principle

The DS26LV32ATMX contains four independent differential receivers, each consisting of a precision differential comparator followed by a level-shifting output stage. Each receiver compares the voltage difference between its A and B inputs: when (A – B) exceeds +200mV, the output Y goes HIGH; when (A – B) is less than -200mV, the output Y goes LOW. The wide common-mode range allows the inputs to be offset from ground by common-mode noise without affecting the differential sensing. The fail-safe circuit monitors the input common-mode voltage: when both inputs are floating (open circuit) or shorted together, the common-mode voltage drops below the threshold, and the output is forced HIGH. This prevents the output from oscillating or assuming an undefined state when the bus is idle. The 22ns propagation delay includes the comparator response time and output drive delay. The output stage drives CMOS and TTL logic levels with appropriate output current for driving multiple logic inputs.

Pin Description: DS26LV32ATMX Pin Definition and Functions
Pin Name Type Function
1 1A Input Receiver 1 non-inverting input
2 1B Input Receiver 1 inverting input
3 1Y Output Receiver 1 output
4 2Y Output Receiver 2 output
5 2B Input Receiver 2 inverting input
6 2A Input Receiver 2 non-inverting input
7 GND Power Ground
8 3A Input Receiver 3 non-inverting input
9 3B Input Receiver 3 inverting input
10 3Y Output Receiver 3 output
11 4Y Output Receiver 4 output
12 4B Input Receiver 4 inverting input
13 4A Input Receiver 4 non-inverting input
14-16 EN/R Input Enable inputs (active HIGH/LOW)
Application Scenarios: In which products and applications is DS26LV32ATMX used
  • 4-channel RS-422 receiver for industrial PLC with fail-safe idle detection
  • Point-to-point 32MHz differential data link with 3.3V logic
  • Multipoint bus receiver with fail-safe for disconnected nodes
  • Low-voltage differential signaling converter to single-ended TTL
Alternative Models: What chips are recommended as replacements for DS26LV32ATMX
Manufacturer Part Number Package Notes
TI DS26LV32ATM/NOPB SOIC-16 Same device, different packing
TI SN65LVDS32DR SOIC-16 LVDS receiver, similar class
onsemi MC3486DR2G SOIC-16 Quad RS-422 receiver, 5V only
TI DS90C402MTX/NOPB TSSOP-16 Quad LVDS receiver, smaller
Renesas 8F3432SAG SOIC-16 Quad RS-422 receiver, equivalent

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1