Opens in a new tab

INA168QDBVRQ1

AEC-Q100 High-Side Current Monitor, 60V CMV, 0.5%, SOT-23-5

4567

Effective Inventory

Image for reference only

Manufacturer Part:

INA168QDBVRQ1

Package:

SOT-23-5 (2.9 x 1.6 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The INA168QDBVRQ1 from Texas Instruments is an AEC-Q100 automotive-grade high-side current shunt monitor with 2.7-60V common-mode range, 0.5% accuracy, and adjustable gain in a SOT-23-5 package.

Key Specifications

Type High-Side Current Shunt Monitor (Automotive)
Common-Mode Voltage 2.7 V to 60 V
Supply Voltage 2.7 V to 60 V
Accuracy 0.5% (max gain error)
Bandwidth 800 kHz @ G=100
Input Offset +/-1 mV (max)
CMRR 100 dB (min)
Quiescent Current 60 uA (typical)
Output Current output (externally set gain)
AEC-Q100 Grade 1 (-40C to +125C)
Package SOT-23-5

Features

  • 2.7V to 60V wide common-mode range
  • 0.5% max gain error
  • 100 dB minimum CMRR
  • 60 uA quiescent current
  • Adjustable gain via external resistor
  • AEC-Q100 Grade 1 qualified
  • Current output for noise immunity

Applications

  • Automotive battery current monitoring
  • Motor drive current sensing
  • Power supply load monitoring
  • Overcurrent protection
Product Introduction: INA168QDBVRQ1 Product Introduction

The INA168QDBVRQ1 from Texas Instruments is an AEC-Q100 Grade 1 qualified high-side current shunt monitor that measures voltage across a shunt resistor and provides a proportional output current. The device operates with a common-mode voltage range of 2.7V to 60V, independent of the supply voltage, making it ideal for automotive 12V and 48V battery systems. The 0.5% maximum gain error and 100 dB minimum CMRR provide precise current measurement even in noisy environments. The current-output architecture allows the gain to be set with a single external resistor, and the output can drive long traces without voltage drop concerns. The 60 uA quiescent current minimizes battery drain in always-on applications. The 800 kHz bandwidth at G=100 supports motor control and switching power supply current sensing.

Working Principle: INA168QDBVRQ1 Working Principle

The INA168QDBVRQ1 uses a precision difference amplifier to measure the small voltage drop across an external shunt resistor placed between the power supply and the load (high-side sensing). The input stage handles common-mode voltages from 2.7V to 60V while amplifying the differential shunt voltage. The internal amplifier drives a current output that is proportional to the sensed shunt voltage: IOUT = (VSENSE / 5kOhm) where VSENSE is the voltage across the shunt. An external load resistor (RL) converts this output current to a ground-referenced voltage: VOUT = IOUT x RL. The gain is therefore: G = RL / 5kOhm. This current-output architecture provides inherent noise immunity for long PCB traces, as the output voltage is developed locally at the ADC. The 100 dB CMRR ensures that common-mode voltage fluctuations (such as from battery transients) do not affect the measurement accuracy. The internal reference current source sets the 5kOhm transconductance factor.

Pin Description: INA168QDBVRQ1 Pin Definition and Functions
Pin Name Type Function
1 OUT Output Current output (proportional to Vshunt)
2 GND Power Ground
3 V+ Input Shunt resistor positive terminal (high-side)
4 V- Input Shunt resistor negative terminal (load-side)
5 Vs Power Supply voltage (2.7-60V)
Application Scenarios: In which products and applications is INA168QDBVRQ1 used
  • 48V mild-hybrid battery pack current monitoring with 60V CMV margin
  • BLDC motor phase current sensing with 800kHz bandwidth for FOC
  • 12V automotive alternator output current measurement with AEC-Q100
  • Server power supply load current monitoring with 0.5% accuracy
Alternative Models: What chips are recommended as replacements for INA168QDBVRQ1
Manufacturer Part Number Package Notes
TI INA168QDBVRQ1 SOT-23-5 Automotive Q1 version
TI INA168DBVR SOT-23-5 Non-automotive version
TI INA169NA/250 SOT-23-5 60V, similar, nano-power
TI INA138NA/250 SOT-23-5 Lower cost, lower accuracy
ADI LT6105IDCB SOT-23-6 60V, voltage output, alternative

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1