Opens in a new tab

ISO124U

Isolation Amplifier, 1500Vrms, 0.01% NL, 50kHz, DIP-24

1234

Effective Inventory

Image for reference only

Manufacturer Part:

ISO124U

Package:

DIP-24 (0.600 inch / 15.24mm width)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO124U from Texas Instruments is a precision isolation amplifier with 1500Vrms continuous isolation, 0.01% nonlinearity, and 50kHz bandwidth in a DIP-24 package.

Key Specifications

Type Precision Isolation Amplifier
Isolation Voltage 1500 Vrms (continuous)
Gain 1 V/V (fixed)
Gain Accuracy +/-0.5% (max)
Nonlinearity +/-0.01% (max)
Bandwidth 50 kHz
Isolation Rejection 140 dB @ 60 Hz
Supply Voltage +/-4.5V to +/-18V (each side)
Isolation Capacitance 2.2 pF (typical)
Package DIP-24 (0.600 inch width)
Operating Temperature -25C to +85C

Features

  • 1500Vrms continuous isolation rating
  • Fixed unity gain with 0.5% accuracy
  • 0.01% maximum nonlinearity
  • 50kHz signal bandwidth
  • 140dB isolation rejection at 60Hz
  • Dual independent supply rails (+/-4.5V to +/-18V)
  • 2.2pF isolation capacitance

Applications

  • Medical ECG/EEG isolation
  • Industrial process control isolation
  • Motor current sensing isolation
  • Data acquisition front-end isolation
Product Introduction: ISO124U Product Introduction

The ISO124U from Texas Instruments (originally Burr-Brown) is a precision isolation amplifier that provides galvanic isolation between input and output with 1500Vrms continuous rating. The device achieves 0.01% maximum nonlinearity through a duty-cycle modulation-demodulation scheme, where the input voltage is converted to a pulse-width modulated signal, transmitted across the isolation barrier via an internal transformer, and demodulated on the output side. The fixed unity gain (1 V/V) with 0.5% accuracy simplifies the signal path without external gain-setting components. The 50 kHz bandwidth supports most industrial and medical sensing applications. The 140 dB isolation rejection at 60 Hz eliminates power-line interference in sensitive measurements. The DIP-24 package provides wide creepage and clearance distances for high-voltage isolation. The dual independent supply rails allow the input and output sides to be powered from different sources.

Working Principle: ISO124U Working Principle

The ISO124U uses a duty-cycle modulation technique to transmit analog signals across the isolation barrier. On the input side, the input voltage is compared against a 500 kHz triangular wave in a PWM modulator, producing a pulse-width modulated digital signal whose duty cycle is proportional to the input voltage. This digital signal is transmitted through an internal planar transformer that provides the galvanic isolation barrier. On the output side, a demodulator reconstructs the analog signal by filtering the PWM signal with a 2nd-order low-pass filter. The 50 kHz bandwidth is determined by the output filter cutoff frequency. The 0.01% nonlinearity is achieved because the PWM modulation is inherently linear – the duty cycle is directly proportional to the input voltage with high precision. The isolation characteristics are determined by the transformer: 1500Vrms continuous rating, 2.2pF coupling capacitance, and 140dB isolation rejection at 60 Hz. The transformer’s high magnetizing inductance and low inter-winding capacitance ensure signal integrity while maintaining safety isolation.

Pin Description: ISO124U Pin Definition and Functions
Pin Name Type Function
1 VIN+ Input Non-inverting signal input
2 VIN- Input Inverting signal input
3 V+IN Power Input side positive supply
4 V-IN Power Input side negative supply
5 COM IN Power Input side common (ground)
6,7 NC – No connect
8 OSC Output Internal oscillator output (decouple)
9 COM OUT Power Output side common (ground)
10 V-OUT Power Output side negative supply
11 V+OUT Power Output side positive supply
12 VOUT Output Isolated output voltage
Application Scenarios: In which products and applications is ISO124U used
  • Medical ECG front-end with 1500Vrms patient isolation and 0.01% linearity
  • Industrial 4-20mA current loop receiver with 140dB 60Hz rejection
  • Motor phase current sensing with high-side shunt and isolated output
  • Data acquisition system channel-to-channel isolation with 50kHz bandwidth
Alternative Models: What chips are recommended as replacements for ISO124U
Manufacturer Part Number Package Notes
TI ISO124P DIP-24 Wider temperature range version
TI AMC1301DWVR SOIC-8 Isolated current-sense amplifier, newer
ADI AD202JN DIP-24 Isolation amplifier, alternative
TI ISO224 SOIC-16 Isolated amplifier, newer, smaller
Silicon Labs Si8920B-IS SOIC-8 Isolated current sense, digital output

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1