Opens in a new tab

MAX31865ATP+

RTD-to-Digital, 15-bit, PT100/PT1000, SPI, TQFN-20

2345

Effective Inventory

Image for reference only

Manufacturer Part:

MAX31865ATP+

Package:

TQFN-20 (4.5 x 4.5 x 0.83 mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX31865ATP+ from Analog Devices (Maxim) is an RTD-to-digital converter with 15-bit resolution, SPI interface, and support for PT100/PT1000 sensors in a TQFN-20 package.

Key Specifications

Type RTD-to-Digital Converter
RTD Types PT100, PT1000, PT500
Resolution 15-bit ADC
Accuracy +/-0.5C (PT100 @ 0C)
Interface SPI (up to 5 MHz)
Supply Voltage 3.0V to 3.6V (VDD); 3.0V to 5.5V (VLOGIC)
Current Consumption 1.5 mA (max)
Fault Detection Open, short, out-of-range
Internal Offset Compensation Yes
Package TQFN-20 (4.5 x 4.5 x 0.83 mm)
Operating Temperature -40C to +125C

Features

  • Supports PT100, PT1000, and other RTD types
  • 15-bit ADC resolution for 0.03C temperature resolution
  • +/-0.5C accuracy at 0C with PT100
  • SPI interface up to 5 MHz
  • Built-in fault detection (open/short/out-of-range)
  • Internal offset compensation

Applications

  • Precision temperature measurement
  • Industrial process control
  • Medical thermometry
  • Food safety monitoring
Product Introduction: MAX31865ATP+ Product Introduction

The MAX31865ATP+ from Analog Devices (formerly Maxim Integrated) is a precision RTD-to-digital converter that simplifies platinum RTD (Resistance Temperature Detector) measurement. The device integrates a precision current source, a 15-bit delta-sigma ADC, and all necessary signal conditioning to directly measure PT100, PT1000, and other RTD types. The SPI interface provides easy connection to any microcontroller at up to 5 MHz clock rate. The +/-0.5C accuracy at 0C with PT100 is achieved through internal offset compensation and a precision reference resistor connection. The built-in fault detection identifies RTD open-circuit, short-circuit, and out-of-range conditions, enhancing system reliability. The TQFN-20 package provides a compact footprint with an exposed paddle for thermal management.

Working Principle: MAX31865ATP+ Working Principle

The MAX31865ATP+ uses a ratiometric measurement technique to convert the RTD resistance to a digital value. A precision reference resistor (RREF) and the RTD are connected in a voltage divider configuration, with the internal current source driving current through both. The ADC measures the ratio of the RTD voltage to the reference voltage, which eliminates errors from current source drift. The conversion equation is: RTD = (ADC_Code / 2^15) x RREF. The temperature is then calculated from the RTD resistance using the Callendar-Van Dusen equation: R(T) = R0 x [1 + AT + BT^2 + C(T-100)T^3] (for T<0C), where R0 is the RTD resistance at 0C (100 ohm for PT100), and A, B, C are the platinum coefficients defined by IEC 60751. The 15-bit ADC provides 0.03C temperature resolution. The internal offset compensation nulls the system offset at power-up by measuring with the current source disabled. Fault detection works by monitoring the RTD voltage for values outside the expected range.

Pin Description: MAX31865ATP+ Pin Definition and Functions
Pin Name Type Function
1 RTDIN+ Input RTD positive input
2 RTDIN- Input RTD negative input (sense)
3 RTDI- Input RTD negative (force current)
4 VBIAS Power Internal bias output (decouple)
5 REFIN+ Input Reference resistor positive terminal
6 REFIN- Input Reference resistor negative terminal
7,8,9,10 GND Power Ground
11 VDD Power 3.3V analog supply
12 SCLK Input SPI clock
13 CS Input SPI chip select (active LOW)
14 SDO Output SPI data output
15 SDI Input SPI data input
16 DRDY Output Data ready (active LOW)
17 FAULT Output Fault indicator (active LOW, open-drain)
18 VLOGIC Power Digital I/O supply (3-5.5V)
Application Scenarios: In which products and applications is MAX31865ATP+ used
  • PT100 precision temperature measurement with 0.5C accuracy for industrial ovens
  • Medical-grade thermometry with PT1000 sensor and SPI data interface
  • Food safety cold chain monitoring with fault detection for open/short RTD
  • Laboratory calibration standard with 15-bit resolution and offset compensation
Alternative Models: What chips are recommended as replacements for MAX31865ATP+
Manufacturer Part Number Package Notes
ADI MAX31865ATP+T TQFN-20 Same device, tape and reel
TI LMP91200MT/NOPB TSSOP-20 RTD AFE, requires external ADC
Microchip MCP9600T-E/MX QFN-20 Thermocouple-to-digital (different sensor)
TI ADS1220IPWR TSSOP-16 24-bit ADC for RTD, more flexible
ADI AD7124-4BCPZ LFCSP-24 24-bit ADC, 4-channel RTD

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1