Opens in a new tab

MCP9600T-E/MX

Thermocouple-to-Digital, 18-bit, 8 TC types, I2C, QFN-20

3456

Effective Inventory

Image for reference only

Manufacturer Part:

MCP9600T-E/MX

Package:

QFN-20 (5.0 x 5.0 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MCP9600T-E/MX from Microchip Technology is a thermocouple EMF-to-digital converter with 18-bit resolution, cold-junction compensation, and I2C interface in a QFN-20 package.

Key Specifications

Type Thermocouple-to-Digital Converter
Thermocouple Types K, J, T, N, S, E, B, R
Resolution 18-bit (0.0625C per LSB)
Accuracy +/-1.5C (K-type, -200C to +1372C)
Cold-Junction Compensation Internal (+/-0.5C accuracy)
Interface I2C (up to 1 MHz)
Supply Voltage 2.7V to 5.5V
Current Consumption 300 uA (typical, active)
Alert Outputs 4 configurable alert pins
Package QFN-20 (5 x 5 x 0.9 mm)
Operating Temperature -40C to +125C (ambient)

Features

  • Supports 8 thermocouple types (K, J, T, N, S, E, B, R)
  • 18-bit resolution with 0.0625C temperature step
  • Integrated cold-junction compensation
  • +/-1.5C accuracy for K-type over wide range 4 configurable temperature alert outputs I2C interface up to 1 MHz

Applications

  • Industrial furnace temperature monitoring
  • Oven and kiln control
  • Automotive exhaust gas temperature
  • Laboratory instrumentation
Product Introduction: MCP9600T-E/MX Product Introduction

The MCP9600T-E/MX from Microchip Technology is a fully integrated thermocouple-to-digital converter that eliminates the need for external cold-junction compensation, signal conditioning, and ADC circuitry. The device supports 8 standard thermocouple types (K, J, T, N, S, E, B, R) with selectable NIST-standard conversion tables stored in internal ROM. The 18-bit resolution provides 0.0625C temperature steps, while the +/-1.5C accuracy for K-type thermocouples covers the full -200C to +1372C measurement range. The internal cold-junction compensation sensor achieves +/-0.5C accuracy, automatically applying the correction to the thermocouple reading. Four configurable alert outputs with independent thresholds enable hardware-level over-temperature, under-temperature, and window detection without MCU polling. The I2C interface supports up to 1 MHz (FM+) for fast data readout. The QFN-20 package provides a compact footprint with an exposed pad for thermal coupling to the cold junction.

Working Principle: MCP9600T-E/MX Working Principle

The MCP9600 integrates a precision instrumentation amplifier, a high-resolution delta-sigma ADC, a cold-junction temperature sensor, and NIST-standard thermocouple lookup tables. The thermocouple generates a small Seebeck voltage proportional to the temperature difference between the hot junction (measurement point) and the cold junction (connection point). The instrumentation amplifier amplifies this millivolt-level signal with low noise and high input impedance. Simultaneously, the internal cold-junction temperature sensor (a silicon bandgap sensor) measures the temperature at the thermocouple connection point. The ADC digitizes the amplified Seebeck voltage, and the digital logic adds the cold-junction temperature to the thermocouple EMF reading using the NIST-standard lookup table for the selected thermocouple type, outputting the absolute hot-junction temperature directly. The 18-bit resolution is achieved through a 3rd-order delta-sigma modulator with decimation filtering. The 4 alert comparators operate on the digital temperature value with programmable hysteresis and interrupt behavior.

Pin Description: MCP9600T-E/MX Pin Definition and Functions
Pin Name Type Function
1 VDD Power Supply voltage (2.7-5.5V)
2-5 Alert 1-4 Output Configurable temperature alerts (active LOW)
6 GND Power Ground
7 SCL Input I2C clock
8 SDA I/O I2C data
9 ADDR Input I2C address select (7 options)
10 VIN+ Input Thermocouple positive input
11 VIN- Input Thermocouple negative input
12-20 GND/NC – Ground / No connect / Exposed pad
Application Scenarios: In which products and applications is MCP9600T-E/MX used
  • Industrial furnace K-type thermocouple monitoring to 1372C with 0.0625C resolution
  • Multi-zone oven control with 4 alert outputs for independent over-temp shutdown
  • Automotive EGT (exhaust gas temperature) with K-type sensor and cold-junction compensation
  • Laboratory calibration with S-type thermocouple and +/-1.5C accuracy
Alternative Models: What chips are recommended as replacements for MCP9600T-E/MX
Manufacturer Part Number Package Notes
Microchip MCP9601T-E/MX QFN-20 Same but without alert outputs
ADI (Maxim) MAX31855KASA+ SOIC-8 K-type only, SPI, 14-bit
ADI (Maxim) MAX31856MUD+ TSSOP-14 Multi-type, SPI, 19-bit
TI ADS1220IPWR TSSOP-16 24-bit ADC, requires external CJC
ST LTC2983 LQFP-48 Multi-channel, more features

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1