Opens in a new tab

23LC1024-I/ST

1Mbit SPI SRAM, 20MHz, Unlimited R/W, SQI, TSSOP-8

5678

Effective Inventory

Image for reference only

Manufacturer Part:

23LC1024-I/ST

Package:

TSSOP-8 (4.4 x 3.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 23LC1024-I/ST from Microchip Technology is a 1Mbit SPI serial SRAM with 20MHz clock speed, SDI/SQI interface options, and unlimited read/write endurance in a TSSOP-8 package.

Key Specifications

Type 1Mbit SPI Serial SRAM
Density 1 Mbit (128 Kbyte)
Organization 131,072 x 8 bits
Interface SPI (SDI) / Quad SPI (SQI)
Max Clock Speed 20 MHz (SPI); 104 Mbps (SQI)
Read/Write Endurance Unlimited
Access Time 25 ns (SPI sequential)
Active Current 5 mA (typical @ 20MHz)
Standby Current 5 uA (typical)
Supply Voltage 2.5V to 5.5V
Package TSSOP-8 (4.4 x 3.0 mm)
Operating Temperature -40C to +85C (I grade)

Features

  • 1Mbit (128KB) SPI serial SRAM
  • Unlimited read/write endurance (no wear)
  • SPI (SDI) and Quad SPI (SQI) modes
  • 20 MHz SPI clock speed
  • Sequential and page-mode access
  • Low standby current: 5 uA

Applications

  • MCU external RAM expansion
  • Audio/video buffering
  • Data logging and circular buffers
  • Graphics frame buffers
Product Introduction: 23LC1024-I/ST Product Introduction

The 23LC1024-I/ST from Microchip Technology is a 1Mbit (128 Kbyte) serial SRAM with SPI and Quad SPI (SQI) interfaces in a TSSOP-8 package. Unlike flash memory or EEPROM, SRAM provides unlimited read/write endurance with no wear mechanism, making it ideal for frequently updated data buffers and working memory. The device supports three interface modes: standard SPI (SDI, single data in), and Quad SPI (SQI, four data lines) for 4x throughput. The 20 MHz SPI clock provides up to 20 Mbit/s throughput in SDI mode, while SQI mode achieves 80 Mbit/s effective data rate at 20 MHz clock. The sequential read/write mode allows continuous access to the entire memory array with a single address, ideal for circular buffers and DMA transfers. The 2.5V to 5.5V supply range supports both 3.3V and 5V systems. The 5 uA standby current is suitable for battery-backed applications.

Working Principle: 23LC1024-I/ST Working Principle

The 23LC1024 uses a 6-transistor SRAM cell array organized as 131,072 x 8 bits. The memory is accessed through an SPI-compatible serial interface using standard command opcodes: READ (0x03), WRITE (0x02), EDIO (0x3B) for SDI mode, and EQIO (0x38) for SQI mode. In SPI mode, the master sends an 8-bit opcode followed by a 24-bit address (only lower 17 bits used), then reads or writes data. Sequential mode allows continuous read/write without re-issuing the address – the internal address counter auto-increments and wraps around at the memory boundary. In SQI mode, data is transferred on all four I/O pins simultaneously, quadrupling the effective throughput. The SRAM cells use a bistable flip-flop structure that retains data as long as power is applied, with no refresh requirement (unlike DRAM). The unlimited endurance is inherent to SRAM – the read and write operations are non-destructive and don’t involve charge movement through oxide layers.

Pin Description: 23LC1024-I/ST Pin Definition and Functions
Pin Name Type Function
1 CS Input Chip select (active LOW)
2 SO/SIO1 I/O SPI data out / SQI data 1
3 NC/SIO2 I/O No connect (SPI) / SQI data 2
4 VSS Power Ground
5 SI/SIO0 I/O SPI data in / SQI data 0
6 SCK Input Serial clock
7 HOLD/SIO3 I/O Hold (SPI) / SQI data 3
8 VDD Power Supply voltage (2.5-5.5V)
Application Scenarios: In which products and applications is 23LC1024-I/ST used
  • 8-bit MCU external 128KB RAM expansion via SPI for audio processing
  • Data logger circular buffer with unlimited endurance for continuous writes
  • Small LCD frame buffer with SQI 80Mbps throughput for 320×240 display
  • Voice recognition working memory with 5uA standby for battery backup
Alternative Models: What chips are recommended as replacements for 23LC1024-I/ST
Manufacturer Part Number Package Notes
Microchip 23LC512-I/ST TSSOP-8 512Kbit, half density
Microchip 23LCV1024-I/ST TSSOP-8 Battery-backed SRAM version
ISSI IS66WVS1M8BLL-104NLI DFN-8 1Mbit SPI PSRAM, lower cost
AP Memory APS6404L-3SQR-SN SOP-8 4Mbit SPI PSRAM, higher density
Espressif ESP-PSRAM64 SOP-8 64Mbit PSRAM for ESP32

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1