Opens in a new tab

LT6105IDCB

Current Sense Amp, 105V CM, 1MHz, SOT-23-6, Tube PKG

3456

Effective Inventory

Image for reference only

Manufacturer Part:

LT6105IDCB

Package:

SOT-23-6 (2.9 x 1.6 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LT6105IDCB from Analog Devices is a high-side current sense amplifier with 105V maximum common mode, 1MHz bandwidth, and SOT-23-6 package. This is the tube-packaged version.

Key Specifications

Type High-Side Current Sense Amplifier
Common Mode Voltage 2.7V to 105V
Bandwidth 1 MHz
Gain Accuracy +/-0.3% (max)
Input Offset Voltage +/-300 uV (max)
Gain External resistor set
Supply Voltage 2.7V to 60V
Supply Current 260 uA (typical)
Output Current 1 mA (typical)
CMRR 100 dB (min)
Package SOT-23-6 (DCB suffix)
Operating Temperature -40C to +85C (I grade)

Features

  • 105V maximum common mode voltage
  • 1 MHz bandwidth for fast current sensing
  • +/-0.3% gain accuracy
  • +/-300 uV max input offset voltage
  • 100 dB minimum CMRR
  • External gain resistor for flexible configuration

Applications

  • Battery current monitoring
  • Motor current sensing
  • Power supply current limiting
  • Solar panel monitoring
Product Introduction: LT6105IDCB Product Introduction

The LT6105IDCB from Analog Devices is a high-side current sense amplifier with 105V common mode voltage range and 1MHz bandwidth in a SOT-23-6 package. This is the tube-packaged version of the LT6105IDCB#TRPBF (which uses tape and reel). The device is electrically identical in all respects. The LT6105 measures the voltage across an external sense resistor placed in the high-side power path and provides a ground-referenced output voltage proportional to the load current. The 105V maximum common mode supports high-voltage battery and industrial supply monitoring. The 1MHz bandwidth enables fast overcurrent detection for power supply protection. The +/-0.3% gain accuracy and 100 dB CMRR provide precise measurement even with large common mode swings. The external gain resistors allow flexible output scaling to match the ADC input range.

Working Principle: LT6105IDCB Working Principle

The LT6105IDCB operates identically to the LT6105IDCB#TRPBF. It uses a precision difference amplifier with internal level-shifting to measure the differential voltage across an external sense resistor while rejecting the high common mode voltage. The internal attenuator divides the common mode voltage to within the amplifier’s input range, while the differential signal is preserved and amplified. The output voltage is VOUT = ISENSE x RSENSE x (ROUT/RIN), where RIN and ROUT are external gain-setting resistors. The 100 dB CMRR is maintained by laser-trimmed resistor matching. The 1 MHz bandwidth allows the device to track rapidly changing current waveforms such as those in switching power supplies and motor drives.

Pin Description: LT6105IDCB Pin Definition and Functions
Pin Name Type Function
1 V- Input Negative sense input (load side)
2 V+ Input Positive sense input (supply side)
3 VCC Power Supply voltage (2.7-60V)
4 OUT Output Amplified output voltage
5 GND Power Ground
6 -IN Input External gain resistor connection
Application Scenarios: In which products and applications is LT6105IDCB used
  • 48V telecom battery current monitoring with 105V CM and 0.3% accuracy
  • Motor driver overcurrent protection with 1MHz bandwidth for PWM current sensing
  • Solar panel string current monitoring with 100V common mode headroom
  • Industrial 24V power supply current limiting with precision gain resistor
Alternative Models: What chips are recommended as replacements for LT6105IDCB
Manufacturer Part Number Package Notes
ADI LT6105IDCB#TRPBF SOT-23-6 Same device, tape and reel
TI INA240A1DR SOIC-8 80V CM, enhanced PWM rejection
TI INA281A1DR SOIC-8 110V CM, 200kHz
Maxim MAX9938TAUK+T SOT-23-5 28V CM, low cost
ADI LT6100IS6#TRPBF SOT-23-6 44V CM, fixed gain version

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1