Opens in a new tab

ISO7741DWR

4-CH Digital Isolator, 5000Vrms, 100Mbps, 3+1, SOIC-16

5678

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7741DWR

Package:

SOIC-16 (10.3 x 7.5 x 2.65 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO7741DWR from Texas Instruments is a quad-channel digital isolator with 5000Vrms isolation, 3/1 channel direction, and 100Mbps data rate in an SOIC-16 package.

Key Specifications

Type Quad-Channel Digital Isolator
Channels 4 (3 forward + 1 reverse)
Isolation Rating 5000 Vrms (1 minute)
Working Voltage 1200 Vpeak (reinforced)
Data Rate 0 to 100 Mbps
Propagation Delay 10.5 ns (typical)
Pulse Width Distortion 2.5 ns (max)
Supply Voltage 2.5V to 5.5V (each side)
Current per Channel 1.5 mA (typical @ 5V, 1Mbps)
Package SOIC-16 (10.3 x 7.5 mm)
Operating Temperature -40C to +125C (D grade)
Safety Approvals UL1577, VDE, CSA, TUV, CQC

Features

  • 5000Vrms reinforced isolation
  • 100 Mbps data rate per channel
  • 3 forward + 1 reverse channel configuration
  • 10.5 ns typical propagation delay
  • 2.5 ns pulse width distortion
  • Wide 2.5V to 5.5V supply range per side

Applications

  • SPI bus isolation
  • Industrial communication isolation
  • Motor drive signal isolation
  • Medical equipment signal isolation
Product Introduction: ISO7741DWR Product Introduction

The ISO7741DWR from Texas Instruments is a quad-channel digital isolator with 5000Vrms reinforced isolation rating in an SOIC-16 package. This is the next-generation successor to the ISO7131CCDBQR, offering improved electromagnetic immunity and lower power consumption. The 3 forward + 1 reverse channel configuration is optimized for SPI bus isolation (SCLK, MOSI, CS forward; MISO reverse) with a single device. The 100 Mbps data rate supports SPI clock frequencies up to 50 MHz. The 10.5 ns typical propagation delay and 2.5 ns maximum pulse width distortion maintain signal integrity for timing-sensitive protocols. The 5000 Vrms isolation and 1200 Vpeak working voltage meet reinforced isolation requirements per IEC 61010-1 and VDE 0884-10. The wide 2.5V to 5.5V supply range on each side supports level translation between different voltage domains. The DWR suffix indicates SOIC-16 package with tape and reel.

Working Principle: ISO7741DWR Working Principle

The ISO7741DWR uses TI’s second-generation capacitive isolation technology with improved electromagnetic immunity. The isolation barrier consists of silicon dioxide (SiO2) capacitors that provide both galvanic isolation and high-frequency signal coupling. The transmitter modulates the input signal using on-off keying (OOK), and the receiver demodulates it on the other side of the barrier. Compared to the ISO7131 generation, the ISO7741 improves electromagnetic immunity by incorporating a differential receiver architecture that rejects common-mode noise more effectively, particularly during fast transient events (IEC 61000-4-4 EFT). The 100 Mbps data rate is determined by the carrier frequency and modulation bandwidth. The 10.5 ns propagation delay includes the OOK encoding, capacitive coupling through the SiO2 barrier, and demodulation. Each side has independent supply rails, and the device supports supply voltages as low as 2.5V for low-power MCU interfaces.

Pin Description: ISO7741DWR Pin Definition and Functions
Pin Name Type Function
1 VCC1 Power Side 1 supply (2.5-5.5V)
2 INA Input Channel A input (forward)
3 OUTB Output Channel B output (reverse)
4 INC Input Channel C input (forward)
5 IND Input Channel D input (forward)
6 GND1 Power Side 1 ground
7 NC – No connect
8 NC – No connect
9 NC – No connect
10 NC – No connect
11 GND2 Power Side 2 ground
12 OUTD Output Channel D output (forward)
13 OUTC Output Channel C output (forward)
14 INB Input Channel B input (reverse)
15 OUTA Output Channel A output (forward)
16 VCC2 Power Side 2 supply (2.5-5.5V)
Application Scenarios: In which products and applications is ISO7741DWR used
  • SPI bus isolation: SCLK+MOSI+CS forward, MISO reverse with single IC
  • Motor drive signal isolation with 5000Vrms reinforced rating and EFT immunity
  • Medical equipment UART/SPI isolation with 100Mbps and level translation
  • Industrial PLC digital I/O with 1200Vpeak working voltage
Alternative Models: What chips are recommended as replacements for ISO7741DWR
Manufacturer Part Number Package Notes
TI ISO7131CCDBQR SSOP-16 Previous generation, 150Mbps
TI ISO7741FQDWVRQ1 SOIC-16 Automotive qualified version
Silicon Labs Si8631BD-B-IS1 SOIC-16 3+1 channel, 150Mbps
ADI iCoupler ADuM1411CRWZ SOIC-16 3+1 channel, 100Mbps
TI ISO7740DWR SOIC-16 4 forward channels version

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1