Opens in a new tab

SN74LV1T125DCKR

Single Buffer, 3-State, 5.5V Tolerant, SC-70-5

34567

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LV1T125DCKR

Package:

SC-70-5 / SOT-353 (2.0 x 1.25 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74LV1T125DCKR from Texas Instruments is a single-bit buffer/line driver with 3-state output, 5.5V tolerant input, and SC-70-5 package.

Key Specifications

Type Single Buffer/Line Driver with 3-State Output
Channels 1
Supply Voltage 1.65V to 5.5V
Input Voltage Tolerance Up to 5.5V (independent of VCC)
Output Drive +/-8 mA at 3.3V; +/-16 mA at 5V
Propagation Delay 3.2 ns (typical) @ 5V
Output Enable Active-low (OE#)
Package SC-70-5 (DCK suffix), 2.0 x 1.25 mm
Operating Temperature -40C to +125C

Features

  • Single buffer with 3-state output
  • 1.65V to 5.5V supply voltage range
  • 5.5V tolerant inputs independent of VCC
  • Over-voltage tolerant inputs for level shifting
  • Active-low output enable (OE#)
  • +/-16 mA output drive at 5V

Applications

  • Logic level translation
    • Bus signal buffering
    • Signal isolation
    • I2C/SPI level shifting
Product Introduction: SN74LV1T125DCKR Product Introduction

The SN74LV1T125DCKR from Texas Instruments is a single-bit buffer/line driver with 3-state output in an ultra-compact SC-70-5 package. The device features over-voltage tolerant inputs that can accept signals up to 5.5V regardless of the supply voltage, making it suitable for level translation from higher-voltage logic to lower-voltage logic. The 1.65V to 5.5V supply range supports operation from 1.8V to 5V systems. The active-low output enable (OE#) allows the output to be placed in a high-impedance state, enabling bus sharing with other drivers. The 3.2 ns typical propagation delay at 5V supports high-speed signal buffering. The +/-16 mA output drive at 5V provides sufficient current to drive multiple logic inputs or moderate-length PCB traces. The SC-70-5 package occupies only 2.0 x 1.25 mm of board space, ideal for dense designs.

Working Principle: SN74LV1T125DCKR Working Principle

The SN74LV1T125DCKR consists of a single buffer gate with a 3-state output controlled by the active-low output enable (OE#) pin. When OE# is LOW, the buffer is enabled and the output follows the input (non-inverting). When OE# is HIGH, the output is placed in a high-impedance (Hi-Z) state, effectively disconnecting the output from the bus. The input stage uses a tolerant input structure that clamps the input voltage through ESD diodes to the VCC rail and GND. The over-voltage tolerance feature is achieved by isolating the input buffer from the VCC supply, allowing input voltages up to 5.5V even when VCC is as low as 1.65V. When used for level translation, a 5V input signal can drive the input while the output swings between GND and the lower VCC (e.g., 1.8V or 3.3V), effectively down-translating the logic level. Up-translation is also supported: a 1.8V input signal can drive the input while VCC is 3.3V, with the output swinging between GND and 3.3V.

Pin Description: SN74LV1T125DCKR Pin Definition and Functions
Pin Name Type Function
1 OE# Input Output enable (active LOW)
2 A Input Data input (5.5V tolerant)
3 GND Power Ground
4 Y Output Data output (3-state)
5 VCC Power Supply voltage (1.65V-5.5V)
Application Scenarios: In which products and applications is SN74LV1T125DCKR used
  • 5V to 3.3V logic level translation with 3-state output for shared SPI bus
  • I2C signal buffering with 5.5V input tolerance and active-low enable for bus isolation
  • FPGA 1.8V output to 3.3V peripheral input level shifting with +/-16mA drive
Alternative Models: What chips are recommended as replacements for SN74LV1T125DCKR
Manufacturer Part Number Package Notes
TI SN74LV1T126DCKR SC-70-5 Active-high enable version
Nexperia 74LVC1G125GW SOT-353 Equivalent function
onsemi NL17SZ125XV5T2G SC-88A Similar, tiny package
TI SN74LVC1G125DCKR SC-70-5 LVC version, similar spec
Diodes Inc 74LVC1G125DW-7 SOT-363 Equivalent function

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1