Opens in a new tab

TPS51219RTER

Buck Controller, Diff Feedback, 3-28Vin, D-CAP/D-CAP2, QFN-16

8901

Effective Inventory

Image for reference only

Manufacturer Part:

TPS51219RTER

Package:

WQFN-16 (3.0 x 3.0 x 0.8 mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS51219RTER from Texas Instruments is a high-performance synchronous buck controller with differential voltage feedback, 3-28V input, D-CAP/D-CAP2 modes, and 3x3mm QFN-16 package.

Key Specifications

Type Synchronous Step-Down Controller with Differential Feedback
Input Voltage (Conversion) 3V to 28V
Supply Voltage (V5) 5V (external)
Output Voltage 0.5V to 2.0V (adjustable); 1.05V/1.0V fixed options
Output Current 0A to 20A+ (external MOSFETs)
Control Mode D-CAP or D-CAP2 (selectable via MODE resistor)
Switching Frequency 300/400/500/670 kHz (mode-dependent)
Current Sensing Low-side RDS(ON) sensing (4700 ppm/C) or external resistor
Soft-Start 1ms internal voltage servo
Package WQFN-16 (RTE, 3 x 3 mm)
Operating Temperature -40C to +85C

Features

  • Differential voltage feedback for precision regulation
  • DC compensation for accurate output voltage
  • D-CAP mode (300/400kHz) for fast transient response
  • D-CAP2 mode (500/670kHz) for all-ceramic capacitors
  • Low-side RDS(ON) current sensing with temperature compensation
  • External RSENSE option for accurate current sensing
  • 1ms internal voltage servo soft-start
  • Built-in output discharge
  • Power-good output
  • Integrated boost switch
  • OVP, UVP, OCP, and thermal shutdown (non-latched)
  • Skip-mode at light load for high efficiency

Applications

  • Notebook computer VCCIO supplies
  • Point-of-load power for Intel/AMD platforms
  • Low-voltage high-current POL converters
  • DDR memory power rails
Product Introduction: TPS51219RTER Product Introduction

The TPS51219RTER from Texas Instruments is a high-performance single synchronous step-down controller with differential voltage feedback in a tiny 3x3mm WQFN-16 package. The device features selectable D-CAP or D-CAP2 control modes via the MODE pin resistor, providing flexibility for applications requiring either fast transient response (D-CAP) or stability with low-ESR ceramic output capacitors (D-CAP2). The differential voltage feedback senses the output voltage directly at the load through dedicated VSNS/GSNS pins, eliminating IR drop errors in high-current PCB traces. The DC compensation feature corrects for the DC offset inherent in D-CAP mode, providing tight output voltage regulation. The conversion input voltage ranges from 3V to 28V, supporting a wide range of bus voltages. The output voltage is adjustable from 0.5V to 2.0V or can be set to 1.05V or 1.0V fixed options via the REFIN pin. Current sensing is implemented through low-side MOSFET RDS(ON) sensing with 4700 ppm/C temperature compensation, or an external current sense resistor for higher accuracy. The device requires an external 5V supply (V5) for the internal circuitry and gate drivers.

Working Principle: TPS51219RTER Working Principle

The TPS51219RTER uses adaptive on-time control (D-CAP or D-CAP2) to regulate the output voltage. In D-CAP mode, the controller monitors the output voltage ripple through the VSNS/GSNS differential feedback pair. When the output voltage drops below the reference threshold, the controller triggers an on-time pulse whose duration is adaptively calculated from the input and output voltage to maintain the target switching frequency. This architecture provides extremely fast transient response because there is no error amplifier compensation network limiting the control loop bandwidth. In D-CAP2 mode, an internal compensation ramp is added to the feedback signal, allowing stable operation with very low ESR ceramic output capacitors. The DC compensation circuit measures the DC difference between the output voltage and the reference, and adds a correction term to the on-time adjustment, eliminating the DC offset that naturally occurs in ripple-based control. The differential feedback uses dedicated sense lines (VSNS/GSNS) that connect directly at the load point, rejecting common-mode voltage drops in the power delivery path. The low-side RDS(ON) current sensing measures the voltage across the synchronous MOSFET during the off-time, using the 4700 ppm/C temperature coefficient to compensate for RDS(ON) variation with temperature.

Pin Description: TPS51219RTER Pin Definition and Functions
Pin Name Type Function
1 V5 Power 5V supply for internal circuits and gate drivers
2 BST I/O Bootstrap capacitor for high-side driver
3 DH Output High-side MOSFET gate drive
4 DL Output Low-side MOSFET gate drive
5 PGND Power Power ground for gate drivers
6 TRIP Input Overcurrent trip level / current sense
7 COMP I/O DC compensation capacitor
8 MODE Input Mode/frequency selection resistor
9 VSNS Input Output voltage sense (differential +)
10 GSNS Input Output voltage sense return (differential -)
11 REFIN Input Reference voltage input (1.05V/1.0V/external)
12 EN Input Enable (HIGH=on)
13 PGOOD Output Power-good (open-drain)
14 GND Power Signal ground
15 VIN Input Conversion input voltage (3-28V, sense only)
16 SW I/O Switch node (bootstrap return)
Application Scenarios: In which products and applications is TPS51219RTER used
  • Intel notebook VCCIO 1.05V supply with differential feedback for 20A+ load regulation within 1% at the CPU die
  • 12V to 1.0V POL for FPGA core with D-CAP2 mode and all-ceramic output capacitors at 670kHz
  • 19V to 1.5V DDR3 VDDQ supply with external RSENSE for accurate current reporting and OCP
Alternative Models: What chips are recommended as replacements for TPS51219RTER
Manufacturer Part Number Package Notes
TI TPS51220ARTER WQFN-16 Dual output version
TI TPS51116 WQFN-20 DDR complete solution with LDO
Monolithic Power MP2853GQET-P QFN-20 Multi-phase, more features
Infineon IR3823AMTRPBF PQFN-24 Integrated FET, similar power
TI TPS51216RUKR WQFN-20 DDR VDDQ/VTT/VREF

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1