Opens in a new tab

LM1117MPX-1.8

LDO Regulator, 1.8V, 800mA, 1.2V Vdo, SOT-223

56789

Effective Inventory

Image for reference only

Manufacturer Part:

LM1117MPX-1.8

Package:

SOT-223-4 (6.5 x 3.5 x 1.6 mm, 2.3mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM1117MPX-1.8 from Texas Instruments is an 800mA low-dropout linear regulator with 1.8V fixed output, 1.2V dropout at 800mA, and SOT-223 package.

Key Specifications

Type 800mA Low-Dropout Linear Regulator
Output Voltage 1.8V (fixed)
Output Current 800 mA (max)
Dropout Voltage 1.2V (typical) @ 800mA; 1.3V (max) @ 800mA
Input Voltage Range 2.6V to 15V (1.8V + Vdo to 15V)
Line Regulation 0.2% (max)
Load Regulation 0.4% (max)
Quiescent Current 5 mA (typical)
Output Voltage Accuracy +/-1%
Package SOT-223 (DCY, 4-pin)
Operating Temperature 0C to +125C

Features

  • 1.8V fixed output at 800mA
  • 1.2V typical dropout at full load
  • +/-1% output voltage accuracy (zener-trimmed bandgap)
  • Internal current limiting and thermal shutdown
  • SOT-223 surface-mount package
  • Requires 10uF minimum output capacitor (tantalum)

Applications

  • 1.8V logic power supply
  • FPGA/MCU I/O voltage regulation
  • Post-regulation after switching converter
  • Battery-powered 1.8V systems
Product Introduction: LM1117MPX-1.8 Product Introduction

The LM1117MPX-1.8 from Texas Instruments is an 800mA low-dropout positive voltage regulator with a fixed 1.8V output in an SOT-223 surface-mount package. The MP suffix denotes the SOT-223 package, X indicates tape and reel packaging, and 1.8 specifies the output voltage. The LM1117 is the industry-standard 800mA LDO regulator, second-sourced by multiple manufacturers. The 1.2V typical dropout voltage at 800mA allows operation from a 3.3V input with 300mV of headroom. The +/-1% output voltage accuracy is achieved through zener-trimmed bandgap reference technology, making the device suitable for applications with tight voltage tolerances such as FPGA I/O banks. The internal current limiting protects against output overload, while the thermal shutdown prevents damage from excessive junction temperature. A minimum 10uF tantalum output capacitor is required for stability and improved transient response. The SOT-223 package provides a compact footprint with reasonable thermal performance (Rth JA approximately 80C/W on standard PCB) for the 800mA current rating.

Working Principle: LM1117MPX-1.8 Working Principle

The LM1117MPX-1.8 uses a PNP pass transistor-based LDO topology. The input voltage feeds the emitter of the PNP pass transistor, whose collector provides the regulated 1.8V output. An error amplifier compares a fraction of the output voltage (via the internal resistor divider for the fixed 1.8V version) with an internal bandgap reference voltage. The error amplifier drives the base of the PNP pass transistor to maintain regulation. The PNP structure allows the dropout voltage to be only VCE(sat) of the pass transistor, typically 1.2V at 800mA, much lower than NPN-based regulators that require at least VBE + VCE(sat) dropout. The zener-trimmed bandgap reference uses laser-trimmed resistors to achieve the +/-1% output voltage tolerance. The current limiting circuit monitors the output current by sensing the voltage across an internal resistor in series with the pass transistor. When the current exceeds approximately 1.5A, the base drive to the pass transistor is reduced. The thermal shutdown circuit monitors the junction temperature and turns off the pass transistor when it exceeds approximately 165C, with approximately 30C of hysteresis to prevent oscillation. The output capacitor (10uF minimum tantalum) provides the dominant pole for loop stability and improves transient response. Ceramic capacitors can be used but may require a series resistor (ESR) for stability due to the very low ESR creating a zero at too high a frequency.

Pin Description: LM1117MPX-1.8 Pin Definition and Functions
Pin Name Type Function
1 GND/ADJ Power Ground (fixed version) or Adjust (adjustable version)
2 VOUT Output Regulated 1.8V output
3 VIN Power Input voltage (2.6V-15V)
4 VOUT Output Regulated 1.8V output (tab, electrically pin 2)
Application Scenarios: In which products and applications is LM1117MPX-1.8 used
  • 3.3V to 1.8V FPGA I/O bank power at 800mA with +/-1% output accuracy and 300mV headroom
  • 5V to 1.8V MCU core voltage regulation with 5mA quiescent current and thermal shutdown protection
  • Post-regulation after 2.5V switching converter for 1.8V noise-sensitive analog supply with 700mV LDO dropout margin
Alternative Models: What chips are recommended as replacements for LM1117MPX-1.8
Manufacturer Part Number Package Notes
TI LM1117MPX-3.3 SOT-223 3.3V output version
TI LM1117MPX-ADJ SOT-223 Adjustable version (1.25-13.8V)
onsemi NCP1117DT1.8RKG SOT-223 1.8V, direct equivalent
Diodes Inc AZ1117CH-1.8TRG1 SOT-223 1.8V, compatible
TI TLV1117LV33DCYR SOT-223 Lower Iq (500uA), improved version

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1