Opens in a new tab

TPS259521DSGR

eFuse, 2.7-18V, 4A, 34mOhm, 3.8V OVP, WSON-8

6789

Effective Inventory

Image for reference only

Manufacturer Part:

TPS259521DSGR

Package:

WSON-8 (2.00 x 2.00 x 0.75 mm, 0.5mm pitch, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS259521DSGR from Texas Instruments is a 2.7-18V 4A 34mOhm eFuse with fast 3.8V overvoltage clamp, auto-retry, and 2x2mm WSON-8 package.

Key Specifications

Type 2.7-18V 4A eFuse with Fast Overvoltage Protection
Input Voltage 2.7V to 18V
On-Resistance 34 mOhm (typical)
Continuous Current 4A (-40 to 125C); 5A (-40 to 105C)
Current Limit Range 0.5A to 4A (adjustable, +/-7.5%)
Overvoltage Clamp 3.8V (typical, TPS259521 variant)
OVP Response Time 5 us (typical)
Fault Response Auto-retry
Enable Active-high (with adjustable UVLO)
Output Slew Rate Adjustable via dVdt capacitor
Package WSON-8 (DSG, 2 x 2 mm)
Operating Temperature -40C to +125C

Features

  • 34mOhm on-resistance
  • Adjustable current limit: 0.5-4A (+/-7.5%)
  • 3.8V fast overvoltage clamp (5us)
  • Auto-retry fault response
  • Adjustable output slew rate (inrush control)
  • Active-high enable with adjustable UVLO
  • Fault indicator (FLT open-drain)
  • UL 2367 and IEC 62368-1 certified

Applications

  • Hot-swap and hot-plug
  • Adapter-powered systems
  • SSD and HDD protection
  • Set-top boxes and digital TV
Product Introduction: TPS259521DSGR Product Introduction

The TPS259521DSGR from Texas Instruments is a 2.7V to 18V eFuse (integrated FET hot-swap device) in a tiny 2x2mm WSON-8 package. The DSG suffix denotes the 8-pin WSON package, and R indicates tape and reel. The TPS259521 variant specifically features a 3.8V typical overvoltage clamp with auto-retry fault response and active-high enable. The eFuse integrates a 34mOhm N-channel MOSFET power switch with comprehensive protection circuits in a single device, replacing multiple discrete components (fuse, TVS, hot-swap controller, and MOSFET). The adjustable current limit (0.5A to 4A with +/-7.5% accuracy) is set by a single external resistor from the ILM pin to ground. The 3.8V overvoltage clamp activates within 5us when the input voltage exceeds the clamp threshold, protecting downstream circuitry from voltage surges without requiring external TVS diodes. The auto-retry fault response automatically attempts to re-energize the output after a fault condition, reducing system downtime. The adjustable output slew rate (via the dVdt capacitor) controls inrush current during hot-plug events. The ILM pin also provides a load current monitor output proportional to the actual load current. The device is UL 2367 recognized and IEC 62368-1 certified for safety-critical applications.

Working Principle: TPS259521DSGR Working Principle

The TPS259521DSGR integrates a power MOSFET with control and protection circuits. The 34mOhm N-channel MOSFET is driven by an internal charge pump that generates the gate voltage above VIN to fully enhance the device. The current limit circuit measures the load current through the MOSFET and compares it with the threshold set by the ILM resistor. When the current exceeds the limit, the gate drive is reduced to maintain constant-current operation. The ILM pin voltage is proportional to the load current, providing a monitor output. The overvoltage clamp uses a fast comparator that monitors the input voltage; when VIN exceeds the 3.8V threshold, the MOSFET is partially turned off to clamp the output voltage, limiting the energy delivered to the load. The 5us response time is achieved by a dedicated clamp circuit that bypasses the normal control loop. The dVdt circuit controls the gate voltage ramp rate during turn-on, setting the output voltage slew rate (dV/dt) and therefore the inrush current (Iinrush = CLOAD x dV/dt). The auto-retry circuit automatically re-enables the output after a fault timeout period, cycling the output on and off until the fault clears. The EN/UVLO pin serves dual duty: the active-high enable turns the device on and off, while a resistor divider from VIN to EN sets the undervoltage lockout threshold.

Pin Description: TPS259521DSGR Pin Definition and Functions
Pin Name Type Function
1 dVdt Analog I/O Slew rate control capacitor
2 EN/UVLO Input Enable / undervoltage lockout
3,4 IN Power Input voltage (2.7-18V)
5 OUT Power Output to load
6 FLT Output Fault indicator (open-drain, active-low)
7 ILM Analog I/O Current limit set / current monitor
8 GND Power Ground (exposed pad)
Application Scenarios: In which products and applications is TPS259521DSGR used
  • 5V USB-C port protection with 3.8V OVP clamp, 3A current limit, and adjustable inrush slew rate for hot-plug of 100uF downstream capacitance
  • 12V SSD hot-swap protection with 2A current limit, FLT output for RAID controller fault detection, and auto-retry for transient faults
  • 3.3V adapter-powered set-top box with UVLO set at 3.0V via EN divider and 34mOhm Ron for 0.14V drop at 4A
Alternative Models: What chips are recommended as replacements for TPS259521DSGR
Manufacturer Part Number Package Notes
TI TPS259531DSGR WSON-8 5.7V OVP, auto-retry
TI TPS259530DSGR WSON-8 5.7V OVP, latch-off
TI TPS259540DSGR WSON-8 13.7V OVP, latch-off
onsemi NCP45561IMNTWG DFN-8 eFuse, 5.5V, 4A
TI TPS25982ARSMR WQFN-16 Higher current, more features

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1