Opens in a new tab

ADG1608BCPZ-REEL7

8:1 Analog Mux, 4.5Ohm Ron, 3.3-16V, LFCSP-16

3456

Effective Inventory

Image for reference only

Manufacturer Part:

ADG1608BCPZ-REEL7

Package:

LFCSP-WQ-16 (4.0 x 4.0 x 0.75 mm, 0.5mm pitch, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADG1608BCPZ-REEL7 from Analog Devices is a 8:1 CMOS analog multiplexer with 4.5Ohm on-resistance, 10Ohm max, 3.3-16V supply, and 16-lead LFCSP package.

Key Specifications

Type 8-Channel CMOS Analog Multiplexer
Configuration 8:1 (8 inputs to 1 common output)
On-Resistance 4.5 Ohm (typical); 10 Ohm (max)
On-Resistance Flatness 1 Ohm (typical)
Supply Voltage (Single) 3.3V to 16V
Supply Voltage (Dual) +/-3.3V to +/-8V
Switching Time tON: 80ns; tOFF: 40ns (typical)
Charge Injection 5 pC (typical)
Off Isolation -72 dB (typical at 1MHz)
THD+N 0.04% (typical, RL=110Ohm, f=20-20kHz)
Continuous Current 470 mA (max at 25C)
Package 16-lead LFCSP-WQ (BCPZ suffix)
Operating Temperature -40C to +125C

Features

  • 8:1 multiplexer with 4.5Ohm typical on-resistance
  • 1Ohm on-resistance flatness
  • Break-before-make switching
  • Rail-to-rail signal handling
  • 3V logic-compatible inputs
  • No VL supply required
  • 470mA continuous current per channel

Applications

  • Data acquisition systems
  • Audio/video signal routing
  • Medical instrumentation
  • Automatic test equipment
Product Introduction: ADG1608BCPZ-REEL7 Product Introduction

The ADG1608BCPZ-REEL7 from Analog Devices is a monolithic CMOS 8-channel analog multiplexer in a 16-lead LFCSP-WQ package. The B suffix denotes the B-grade on-resistance (10 Ohm max), CPZ indicates the 16-lead LFCSP package with exposed pad, and REEL7 specifies 7-inch tape and reel packaging. The device switches one of eight inputs (S1-S8) to a common output (D) as determined by the 3-bit binary address lines (A0, A1, A2). An EN input enables or disables the device; when disabled, all channels are off. The 4.5 Ohm typical on-resistance with 1 Ohm flatness minimizes signal attenuation and distortion when routing analog signals. The device conducts equally well in both directions when on, with input signal ranges extending to the supply rails. The break-before-make switching action prevents momentary shorting between channels during transitions. The 5pC typical charge injection is low enough for precision sample-and-hold and data acquisition applications. The 0.04% THD+N specification makes the ADG1608 suitable for audio signal routing. The device operates from single 3.3V to 16V or dual +/-3.3V to +/-8V supplies without requiring a separate VL logic supply, as the 3V logic-compatible inputs accept TTL/CMOS levels directly.

Working Principle: ADG1608BCPZ-REEL7 Working Principle

The ADG1608BCPZ-REEL7 uses a CMOS transmission gate topology for each switch channel. Each transmission gate consists of a parallel combination of an N-channel and a P-channel MOSFET, with their gates driven by complementary control signals. When the switch is on, both MOSFETs conduct, and the parallel combination provides a low, relatively constant on-resistance across the full signal range from negative to positive supply rails. The N-channel device conducts well for signals near the negative rail, while the P-channel device conducts well for signals near the positive rail; together they provide the rail-to-rail switching capability. The 3-bit address decoder and EN input generate the individual switch control signals. The break-before-make circuitry inserts a brief dead time (all switches off) between turning off the current channel and turning on the next channel, preventing crosstalk and momentary shorting. The charge injection of 5pC occurs when the gate control signal transitions, coupling a small amount of charge through the MOSFET gate-to-channel capacitance into the signal path. This is minimized by balancing the N-channel and P-channel contributions, which have opposite polarity charge injection that partially cancels.

Pin Description: ADG1608BCPZ-REEL7 Pin Definition and Functions
Pin Name Type Function
1 A2 Input Address bit 2 (MSB)
2 EN Input Enable (active-high)
3 VDD Power Positive supply
4 VSS Power Negative supply (GND for single-supply)
5 GND Power Digital ground
6 D I/O Common output (drain)
7-10 S8-S5 I/O Analog inputs 8-5
11-14 S4-S1 I/O Analog inputs 4-1
15 A0 Input Address bit 0 (LSB)
16 A1 Input Address bit 1
Application Scenarios: In which products and applications is ADG1608BCPZ-REEL7 used
  • 8-channel data acquisition multiplexer with 4.5Ohm Ron and 5pC charge injection for precision 16-bit ADC input selection at 100kSPS per channel
  • Audio signal router with 0.04% THD+N switching between 8 line-level sources using +/-8V dual supplies for +/-10V signal range
  • Medical instrumentation channel selector with 470mA current rating and rail-to-rail signal handling for sensor multiplexing
Alternative Models: What chips are recommended as replacements for ADG1608BCPZ-REEL7
Manufacturer Part Number Package Notes
ADI ADG1608BRUZ TSSOP-16 Same function, different package
ADI ADG728BCPZ LFCSP-16 Lower voltage (1.8-5.5V), lower Ron
TI MUX508IPWR TSSOP-16 8:1 mux, similar performance
Maxim MAX4617CUD QSOP-16 8:1 mux, 10Ohm Ron
ADI ADG1609BCPZ LFCSP-16 Dual 4:1 differential version

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1