Opens in a new tab

INA139NA/3K

Hi-Side Current Monitor, 2.7-40V, Iout, SOT-23-5

8901

Effective Inventory

Image for reference only

Manufacturer Part:

INA139NA/3K

Package:

SOT-23-5 (2.90 x 1.60 x 1.10 mm, 0.95mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The INA139NA/3K from Texas Instruments is a 2.7-40V high-side current shunt monitor with current output, adjustable gain via external resistor, 60uA Iq, and SOT-23-5 package.

Key Specifications

Type High-Side Unipolar Current Shunt Monitor (Current Output)
Common-Mode Voltage 2.7V to 40V
Supply Voltage 2.7V to 40V
Output Type Current output (transconductance)
Transconductance 1000 uA/V (typical)
Gain Range 1 to 100+ (set by external load resistor)
Input Offset Voltage +/-1 mV (max)
CMRR 100 dB (min)
Bandwidth 440 kHz (ROUT=10kOhm); 220 kHz (ROUT=20kOhm)
Quiescent Current 60 uA (typical); 125 uA (max)
Accuracy +/-2% gain error
Package SOT-23-5 (DBV, NA suffix)
Operating Temperature -40C to +125C

Features

  • Complete unipolar high-side current measurement
  • 2.7V to 40V common-mode and supply range
  • Independent supply and common-mode voltage
  • Single external resistor sets any gain
  • 60uA typical quiescent current
  • Current output allows flexible gain and level shifting

Applications

  • Battery chargers and fuel gauges
  • Motor current monitoring
  • Power supply load current measurement
  • Overcurrent detection
Product Introduction: INA139NA/3K Product Introduction

The INA139NA/3K from Texas Instruments is a high-side unipolar current shunt monitor with a current output in a 5-pin SOT-23 package. The NA suffix denotes the SOT-23-5 package, and /3K indicates tape and reel packaging with 3000 units per reel. Unlike voltage-output current sense amplifiers, the INA139 converts the differential sense voltage across the shunt resistor to a proportional output current through an external load resistor (RL). The transconductance of 1000uA/V means that for every 1mV of sense voltage, the output sources 1uA of current. The output voltage is then VOUT = IOUT x RL = Vsense x 1000uA/V x RL, allowing any gain to be set by choosing the appropriate RL value. This current-output architecture provides flexibility for level shifting and remote sensing: the output current can be routed through a long PCB trace to a remote ADC without voltage drop errors. The INA139 operates from 2.7V to 40V common-mode voltage, independent of the supply voltage, allowing the supply to be connected to either side of the shunt resistor. The 60uA quiescent current minimizes the error caused by connecting the supply across the shunt, and the +/-1mV max input offset limits the minimum measurable sense voltage.

Working Principle: INA139NA/3K Working Principle

The INA139NA/3K uses a current-output architecture based on a precision operational amplifier and a matched internal resistor network. The differential voltage across the shunt resistor (Vsense = VIN+ – VIN-) is amplified and converted to a proportional output current through an internal transconductance stage. The internal 1000uA/V transconductance is set by a laser-trimmed internal resistor. The output current flows through the external load resistor RL connected from the OUT pin to ground, producing a ground-referenced output voltage: VOUT = Vsense x 1000uA/V x RL. For example, with Vsense = 100mV and RL = 10kOhm, VOUT = 100mV x 1000uA/V x 10kOhm = 1.0V, corresponding to a gain of 10 V/V. The gain is entirely determined by the external resistor, allowing any gain from 1 to over 100 to be set. The high 100dB CMRR is achieved through precision laser trimming of the internal resistor divider that attenuates the common-mode voltage before it reaches the differential amplifier. The independent supply and common-mode voltage operation allows the supply pin (V+) to be connected to either side of the shunt resistor, with the 60uA quiescent current adding only a small error to the measurement.

Pin Description: INA139NA/3K Pin Definition and Functions
Pin Name Type Function
1 V+ Power Supply voltage (2.7-40V)
2 GND Power Ground
3 IN+ Input Positive sense input (high-side)
4 IN- Input Negative sense input (low-side)
5 OUT Output Current output (connect RL to GND)
Application Scenarios: In which products and applications is INA139NA/3K used
  • 12V battery charger current monitoring with 100mOhm shunt, RL=25kOhm providing 2.5V/V gain, 0-2.5V output for 0-1A charge current
  • 24V industrial motor current sensing with 50mOhm shunt and RL=10kOhm for 5V full-scale at 1A, 440kHz bandwidth for PWM current measurement
  • USB port overcurrent detection with 20mOhm shunt and comparator on VOUT, triggering at 2A with 40mV sense voltage
Alternative Models: What chips are recommended as replacements for INA139NA/3K
Manufacturer Part Number Package Notes
TI INA169NA/3K SOT-23-5 60V common-mode version
TI INA138NA/3K SOT-23-5 Lower cost, wider Vsense range
TI INA180A1IDBVR SOT-23-5 Voltage output, 20V/V gain
Maxim MAX9938FATT+T SOT-23-6 Current-sense amp, voltage out
TI INA240A1DRQ1 VSSOP-8 Enhanced PWM rejection

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1