Opens in a new tab

SN65HVD12DR

3.3V RS-485 transceiver, 1Mbps, ±16kV ESD, 128 nodes, thermal shutdown in SOIC-8

11200

Effective Inventory

Image for reference only

Manufacturer Part:

SN65HVD12DR

Package:

SOIC-8 (4.90 x 3.90 x 1.75 mm) D-8

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN65HVD12DR from Texas Instruments is a 3.3V RS-485/RS-422 transceiver in an SOIC-8 package. It supports data rates up to 1Mbps, features ±16kV HBM ESD protection, and provides 1/4 unit load allowing up to 128 nodes on the bus. The device includes thermal shutdown protection and operates from 3.0V to 5.5V supply.

Key Specifications

Data Rate Up to 1Mbps
Supply Voltage 3.0V ~ 5.5V
ESD Protection ±16kV HBM on bus pins
Unit Load 1/4 (up to 128 nodes)
Differential Output Voltage ±2.0V (Minimum)
Receiver Input Impedance 1/4 Unit Load
Short-Circuit Protection Yes (to +12V/-7V)
Thermal Shutdown Yes (150°C)
Package SOIC-8 (4.90 x 3.90mm)
Operating Temperature -40°C ~ +85°C

Features

  • 3.3V or 5V single supply operation
  • ±16kV HBM ESD protection on bus pins
  • 1/4 unit load allows up to 128 nodes
  • Short-circuit protection to +12V/-7V
  • Thermal shutdown protection at 150°C
  • Meets ANSI TIA/EIA-485-A standard at 5V
  • Open-circuit failsafe receiver

Applications

  • Fieldbus networks
  • Industrial automation
  • Motor control communication
  • Building environmental control
  • Point-of-sale terminals
Product Introduction: SN65HVD12DR Product Introduction

The SN65HVD12DR is a 3.3V RS-485 transceiver designed for half-duplex communication over twisted-pair bus cables. Combining a differential driver and a differential receiver, the device operates from a single 3.0V to 5.5V supply. The 1/4 unit load input impedance allows up to 128 transceivers to share a single bus. Integrated protection features include ±16kV HBM ESD on bus pins, short-circuit protection to +12V/-7V, and thermal shutdown at 150°C junction temperature.

Working Principle: SN65HVD12DR Working Principle

The SN65HVD12 converts between single-ended logic levels (TXD/RXD) and differential RS-485 bus signals (A/B). The driver uses a push-pull output stage to generate the differential signal, which propagates along the twisted-pair cable to all receivers on the bus. The receiver detects the differential voltage between A and B, outputting a logic high or low on RXD. The DE and /RE pins control driver and receiver enable. When both are disabled, the device enters a low-power idle mode. The failsafe receiver biases the output high when the bus is open or all drivers are off.

Pin Description: SN65HVD12DR Pin Definition and Functions
Pin Name Function
1 R Receiver data output
2 /RE Receiver enable (active low)
3 DE Driver enable (active high)
4 D Driver data input
5 GND Ground reference
6 A Non-inverting bus I/O
7 B Inverting bus I/O
8 VCC Supply voltage (3.0-5.5V)
Application Scenarios: In which products and applications is SN65HVD12DR used
  • Modbus RTU Network: 1Mbps data rate supports fast Modbus polling of multiple slave devices over RS-485
  • 3.3V MCU Direct Interface: Operates directly from 3.3V supply without level shifters when used with ARM Cortex-M MCUs
  • Motor Drive Communication: Thermal shutdown protects the transceiver in high-temperature motor control enclosures
  • Retail POS Network: 128-node capability supports multi-terminal installations in retail environments
Alternative Models: What chips are recommended as replacements for SN65HVD12DR
Model Manufacturer Key Difference
SN65HVD11DR TI Same but 250kbps data rate
SN65HVD10DR TI Same but 10Mbps data rate
THVD1450DR TI 500kbps, 3.3-5V, lower cost
MAX3485ECSA+ ADI 3.3V, 10Mbps, SOIC-8
SP3485EN-L MaxLinear 3.3V, 10Mbps, low cost

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1