Opens in a new tab

ADA4896-2ARMZ-R7

Dual 230MHz, 1nV/√Hz low-noise rail-to-rail output op-amp, 3mA/amp, 3-10V supply, MSOP-8

8742

Effective Inventory

Image for reference only

Manufacturer Part:

ADA4896-2ARMZ-R7

Package:

8-Lead MSOP (3.0 x 3.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADA4896-2ARMZ-R7 from Analog Devices is a dual-channel, 1 nV/√Hz, low-power, rail-to-rail output voltage feedback amplifier fabricated on a proprietary SiGe bipolar process. Housed in an 8-lead MSOP package, it delivers 230 MHz bandwidth and 120 V/μs slew rate while consuming only 3 mA per amplifier from a 3 V to 10 V supply, making it ideal for high dynamic range, precision, and high-speed signal chain applications.

Key Specifications

Supply Voltage Range 3 V to 10 V
Bandwidth (G=+1) 230 MHz
Slew Rate 120 V/μs
Input Voltage Noise 1 nV/√Hz
Input 1/f Noise (10 Hz) 2.4 nV/√Hz
Quiescent Current per Amplifier 3 mA
Input Offset Voltage (max) 0.5 mV
HD2/HD3 @ 100 kHz -115 dBc
Operating Temperature -40°C to +125°C

Features

  • Ultra-low input voltage noise of 1 nV/√Hz with low 1/f noise of 2.4 nV/√Hz at 10 Hz
  • Rail-to-rail output swing maximizes dynamic range in low-voltage systems
  • Low distortion: -115 dBc at 100 kHz, VOUT = 2 V p-p
  • Fast settling: 45 ns to 0.1%
  • Wide supply range (3 V to 10 V) for flexible system design

Applications

  • Ultrasound and medical imaging preamplifiers
  • High-performance ADC drivers and DAC buffers
  • Low-noise preamplifier circuits
  • PLL loop filters
  • Test and measurement instrumentation
Product Introduction: ADA4896-2ARMZ-R7 Product Introduction

The ADA4896-2 is a dual-channel, unity-gain stable, low-noise, rail-to-rail output, high-speed voltage feedback amplifier from Analog Devices. Built on the proprietary next-generation SiGe bipolar process, it achieves 1 nV/√Hz input voltage noise and 2.8 pA/√Hz current noise while consuming only 3 mA per amplifier. With 230 MHz -3 dB bandwidth at G=+1, 120 V/μs slew rate, and 45 ns settling time to 0.1%, the device is purpose-built for applications demanding high dynamic range, precision, and speed. The spurious-free dynamic range reaches -80 dBc at 2 MHz. The rail-to-rail output stage and wide 3 V to 10 V supply range provide maximum flexibility in low-voltage and battery-powered designs.

Working Principle: ADA4896-2ARMZ-R7 Working Principle

The ADA4896-2 employs a voltage feedback architecture fabricated on Analog Devices’ proprietary SiGe bipolar process. (1) Input Stage: A differential pair using SiGe HBT transistors delivers ultra-low voltage noise (1 nV/√Hz) and low 1/f noise corner, critical for precision low-frequency signal processing. (2) Gain Stage: A high-gain transimpedance stage with compensation provides the 230 MHz bandwidth and 120 V/μs slew rate, ensuring minimal signal distortion at high frequencies. (3) Output Stage: A rail-to-rail Class AB push-pull output enables output swings to within millivolts of the supply rails, maximizing usable dynamic range in single-supply systems. (4) Bias Network: A precision bias circuit maintains stable 3 mA per-amplifier quiescent current over temperature and supply variations, ensuring consistent performance.

Pin Description: ADA4896-2ARMZ-R7 Pin Definition and Functions
Pin Name Type Function
1 -INA Input Inverting input, Channel A
2 +INA Input Non-inverting input, Channel A
3 VS- Power Negative supply voltage
4 -INB Input Inverting input, Channel B
5 +INB Input Non-inverting input, Channel B
6 VS+ Power Positive supply voltage
7 OUTB Output Output, Channel B
8 OUTA Output Output, Channel A
Application Scenarios: In which products and applications is ADA4896-2ARMZ-R7 used
  • Ultrasound and medical imaging systems as low-noise preamplifiers for transducer signals
  • High-performance ADC drivers requiring low distortion and fast settling in data acquisition systems
  • DAC output buffers in precision waveform generation and audio applications
  • PLL loop filters in frequency synthesis and clock recovery circuits
  • Test and measurement front-end amplifiers demanding ultra-low noise floor
Alternative Models: What chips are recommended as replacements for ADA4896-2ARMZ-R7
Manufacturer Part Number Package Notes
Analog Devices ADA4897-1ARZ SOIC-8 Single channel, with disable
Texas Instruments LMH6624MA SOIC-8 1.3nV/√Hz, 350MHz
Analog Devices ADA4898-1 SOIC-8 Ultra-low distortion, 1nV/√Hz
Texas Instruments THS4551 VSSOP-8 Fully differential, 3.3nV/√Hz
Maxim Integrated MAX4102 SOT-23-6 1.8nV/√Hz, 300MHz

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1