Opens in a new tab

MPU-6050

6-axis IMU, 3-axis gyro+accel, 16-bit, DMP, I2C, QFN-24 (4x4mm), motion tracking

11800

Effective Inventory

Image for reference only

Manufacturer Part:

MPU-6050

Package:

QFN-24 (4.0 x 4.0 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPU-6050 from InvenSense (TDK) is a 6-axis MotionTracking device combining a 3-axis gyroscope and 3-axis accelerometer in a single 4x4x0.9mm QFN package. With an integrated Digital Motion Processor (DMP) and I2C interface, it provides complete motion processing for consumer electronics, robotics, and wearable devices.

Key Specifications

Gyroscope Ranges +/-250, +/-500, +/-1000, +/-2000 deg/s
Accelerometer Ranges +/-2g, +/-4g, +/-8g, +/-16g
ADC Resolution 16-bit per axis
Interface I2C (up to 400kHz) + auxiliary I2C
DMP On-chip Digital Motion Processor
Supply Voltage 2.375V to 3.46V (VLOGIC: 1.71-3.46V)
Current 3.9mA (gyro+accel active)
Operating Temperature -40C to +85C

Features

  • 6-axis MotionTracking with 3-axis gyro and 3-axis accelerometer
  • On-chip DMP offloads sensor fusion computation from host
  • 16-bit ADC resolution for each axis
  • Auxiliary I2C bus for external magnetometer (9-axis fusion)
  • User-programmable gyro and accel full-scale ranges
  • 1024-byte FIFO buffer reduces host processor polling

Applications

  • Smartphone and tablet motion sensing
  • Wearable fitness and activity tracking
  • Robotics and drone stabilization
  • Gaming controllers and VR headsets
Product Introduction: MPU-6050 Product Introduction

The MPU-6050 from InvenSense (TDK) is a 6-axis MotionTracking device that integrates a 3-axis MEMS gyroscope and 3-axis MEMS accelerometer on a single silicon die, connected to an integrated Digital Motion Processor (DMP) via an internal sensor bus. The gyroscope is programmable to +/-250, +/-500, +/-1000, or +/-2000 deg/s full-scale range, and the accelerometer to +/-2g, +/-4g, +/-8g, or +/-16g. Each axis is digitized by a 16-bit ADC. The DMP executes sensor fusion algorithms, offloading computation from the host processor. An auxiliary I2C master bus allows connection of a 3-axis magnetometer for 9-axis sensor fusion. The 1024-byte FIFO buffers sensor data, reducing I2C bus traffic and host polling. The device operates from 2.375V to 3.46V with 3.9mA total current.

Working Principle: MPU-6050 Working Principle

The MPU-6050 integrates MEMS sensors, ADCs, and a motion processor. (1) Gyroscope: Three MEMS vibratory gyroscopes use the Coriolis effect. When an angular rate is applied to a vibrating proof mass, the Coriolis force causes displacement perpendicular to both the vibration and the rotation axis. This displacement is measured capacitively, producing a voltage proportional to angular rate. (2) Accelerometer: Three MEMS accelerometers use capacitive sensing of proof mass displacement under acceleration. Each axis measures the inertial force along one direction, including gravity. (3) ADC: Each sensor output is digitized by a 16-bit sigma-delta ADC with configurable sample rate up to 8kHz (gyro) and 4kHz (accel). (4) DMP: The Digital Motion Processor executes firmware that performs sensor fusion (complementary or Kalman filter), quaternion computation, tap detection, and orientation estimation. Processed data is written to the FIFO for host retrieval. (5) Auxiliary I2C: A secondary I2C master reads external magnetometer data for 9-axis fusion.

Pin Description: MPU-6050 Pin Definition and Functions
Pin Name Type Function
1 CLKIN Input External clock input (optional)
2 AD0/SDO I/O I2C address select / SPI data out
3 INT Output Interrupt output (configurable)
4-7 AUX_CL/DA I/O Auxiliary I2C for magnetometer
8 VLOGIC Power Logic I/O supply (1.71-3.46V)
9 VDD Power Analog supply (2.375-3.46V)
10 GND Ground Ground
11,12 SDA/SCL I/O I2C data and clock
Application Scenarios: In which products and applications is MPU-6050 used
  • Smartphone and tablet motion sensing with DMP sensor fusion
  • Wearable fitness and activity tracking with 3.9mA active current
  • Robotics and drone stabilization with 6-axis IMU data
  • Gaming controllers and VR headsets with auxiliary magnetometer for 9-axis
Alternative Models: What chips are recommended as replacements for MPU-6050
Manufacturer Part Number Package Notes
InvenSense MPU-6500 QFN-24 Lower power, higher performance
InvenSense ICM-20689 QFN-24 Next-gen 6-axis, lower noise
STMicroelectronics LSM6DS3TR-C LGA-14 6-axis, smaller package
Bosch BMI160 LGA-14 6-axis, low power

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1