Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » MLX90132SLQ-AEA-000-SP

MLX90132SLQ-AEA-000-SP

NFC/RFID reader transceiver, ISO14443/15693, 13.56MHz, SPI/UART, QFN-32

9835

Effective Inventory

Image for reference only

Manufacturer Part:

MLX90132SLQ-AEA-000-SP

Package:

QFN-32 (5.00 x 5.00 x 0.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MLX90132SLQ-AEA-000-SP from Melexis is a multi-protocol transceiver IC for NFC, RFID reader, and contactless smart card applications in a QFN-32 package. Supporting ISO 14443 A/B, ISO 15693, and FeliCa protocols, it integrates the complete analog front-end including antenna driver and receiver.

Key Specifications

Protocols ISO 14443 A/B, ISO 15693, FeliCa
Frequency 13.56 MHz
Antenna Driver Integrated (differential push-pull)
Supply Voltage 2.4 V to 5.5 V
Interface SPI, UART
Operating Temperature -40C to +85C

Features

  • Multi-protocol NFC/RFID reader support
  • Integrated antenna driver eliminates external PA
  • SPI and UART host interface
  • Low power consumption with power-down mode
  • On-chip envelope detector for demodulation

Applications

  • NFC reader terminals and POS systems
  • Access control and smart card readers
  • Public transport ticketing systems
  • Library and asset tracking RFID readers
Product Introduction: MLX90132SLQ-AEA-000-SP Product Introduction

The MLX90132SLQ-AEA-000-SP from Melexis is a multi-protocol NFC/RFID reader transceiver IC in a QFN-32 package operating at 13.56MHz. The device supports ISO 14443 Type A and B, ISO 15693, and FeliCa protocols for universal contactless smart card and NFC tag reading. The integrated differential push-pull antenna driver eliminates the need for an external power amplifier, directly driving the antenna matching network. An on-chip envelope detector demodulates the tag response. The device communicates with the host via SPI or UART interface. Supply voltage range is 2.4V to 5.5V with power-down mode for battery-operated applications.

Working Principle: MLX90132SLQ-AEA-000-SP Working Principle

The MLX90132 integrates the complete analog front-end for an NFC/RFID reader. (1) Transmitter: The carrier generator produces a 13.56MHz sine wave that is amplitude-modulated according to the selected protocol (100% ASK for ISO 14443A, 10% ASK for ISO 14443B, etc.). The differential push-pull antenna driver amplifies the modulated carrier and drives the external antenna through a matching network. (2) Receiver: The tag modulates the carrier using load modulation. The antenna picks up the modulated signal, and the on-chip envelope detector extracts the subcarrier. The subcarrier is then digitally demodulated and decoded according to the protocol. (3) Protocol Handler: The internal state machine manages the anti-collision, selection, and data exchange sequences for each supported protocol. (4) Host Interface: The decoded data is transferred to the host MCU via SPI or UART, and the host sends commands to initiate transactions.

Pin Description: MLX90132SLQ-AEA-000-SP Pin Definition and Functions
Pin Group Name Type Function
1,2 ANT1/ANT2 Analog Differential antenna driver outputs
3 RX_IN Analog Receiver input from antenna
4-5 SPI/UART I/O Host communication interface
6 VDD Power Supply (2.4-5.5V)
7 GND Ground Ground
8 IRQ Output Interrupt to host MCU
Application Scenarios: In which products and applications is MLX90132SLQ-AEA-000-SP used
  • NFC reader terminals and POS payment systems with multi-protocol support
  • Access control and smart card readers for building security
  • Public transport ticketing systems with ISO 14443 support
  • Library and asset tracking RFID readers with ISO 15693 long-range
Alternative Models: What chips are recommended as replacements for MLX90132SLQ-AEA-000-SP
Manufacturer Part Number Package Notes
NXP CLRC66303HN HVQFN-32 Similar NFC reader IC
ST ST25R3916B QFN-32 NFC reader, higher power
Melexis MLX90130 QFN-32 Previous generation
NXP PN5180 QFN-40 High-power NFC frontend

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1