Opens in a new tab

MSP430FG4618IPZ

16-bit ultra-low-power MCU, 8MHz, 116KB Flash, 12-bit ADC/DAC, 3 op-amps, LCD, LQFP-100

9577

Effective Inventory

Image for reference only

Manufacturer Part:

MSP430FG4618IPZ

Package:

LQFP-100 (14.00 x 14.00 x 1.40 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MSP430FG4618IPZ from Texas Instruments is an ultra-low-power 16-bit MCU with 116KB Flash, 8KB RAM, 12-bit ADC, dual DAC, op-amps, and LCD driver in a LQFP-100 package. The FG461x series targets medical and metering applications requiring precision analog and low power.

Key Specifications

Core MSP430 16-bit RISC
Speed 8 MHz
Flash 116 KB
RAM 8 KB
ADC 12-bit, 200 ksps, 8 channels
DAC 2 x 12-bit
Op-Amps 3 (internal, configurable)
LCD Segment LCD driver (up to 160 segments)
Operating Temperature -40C to +85C

Features

  • Ultra-low-power with multiple low-power modes down to 1.1uA standby
  • 3 internal configurable op-amps eliminate external signal conditioning
  • 12-bit 200ksps ADC with internal reference
  • Dual 12-bit DAC for analog output generation
  • Segment LCD driver for direct display interface
  • 116KB Flash and 8KB RAM for complex firmware

Applications

  • Medical instrumentation (blood glucose, pulse oximetry)
  • Utility metering with LCD display
  • Portable instrumentation and measurement
  • Industrial sensor conditioning
Product Introduction: MSP430FG4618IPZ Product Introduction

The MSP430FG4618IPZ from Texas Instruments is an ultra-low-power 16-bit MSP430 microcontroller with 116KB Flash and 8KB RAM in a LQFP-100 package. The FG461x series integrates precision analog peripherals including a 12-bit 200ksps ADC, dual 12-bit DAC, and three internal configurable op-amps that can be connected to external pins or routed internally, eliminating external signal conditioning ICs. A segment LCD driver supports up to 160 segments for direct display interface. Multiple low-power modes include Standby (LPM3) at 1.1uA with RTC active and Off (LPM4) at 0.1uA. The device operates at up to 8MHz with 16-bit RISC architecture providing efficient code density.

Working Principle: MSP430FG4618IPZ Working Principle

The MSP430FG4618IPZ uses TI’s MSP430 ultra-low-power architecture with integrated precision analog. (1) CPU: A 16-bit RISC core executes most instructions in one clock cycle at up to 8MHz. The von Neumann architecture with 16 registers provides efficient code density. (2) Low-Power Modes: Six low-power modes progressively disable CPU, clocks, and peripherals. LPM3 (standby with RTC) consumes 1.1uA. A fast 6us wakeup from LPM3 to active mode enables event-driven processing. (3) Internal Op-Amps: Three general-purpose op-amps can be configured as non-inverting, inverting, or differential amplifiers with internal feedback resistors, and can drive the ADC or DAC directly without external connections. (4) LCD Driver: The integrated LCD driver generates segment and common waveforms for direct connection to static or multiplexed LCD glass.

Pin Description: MSP430FG4618IPZ Pin Definition and Functions
Pin Group Name Type Function
1-20 Port 1-3 I/O General I/O with interrupt capability
21-40 Port 4-6/LCD I/O LCD segment/common driver pins
41-50 ADC/OA/DAC Analog Analog input, op-amp, DAC pins
51-60 UART/SPI/I2C I/O Serial communication interface pins
61-70 Timer/PWM I/O Timer capture/compare PWM outputs
71-100 VDD/VSS/RESET/JTAG Mixed Power, ground, reset, debug
Application Scenarios: In which products and applications is MSP430FG4618IPZ used
  • Medical instrumentation (blood glucose meters, pulse oximeters) with internal op-amps
  • Utility metering with LCD segment display and 1.1uA standby
  • Portable instrumentation with 12-bit ADC and internal signal conditioning
  • Industrial sensor conditioning with configurable op-amp front-end
Alternative Models: What chips are recommended as replacements for MSP430FG4618IPZ
Manufacturer Part Number Package Notes
TI MSP430FG4619IPZ LQFP-100 Same with 92KB Flash
TI MSP430F6779A LQFP-100 3-phase metering MCU
ST STM32L476VET6 LQFP-100 ARM Cortex-M4, similar analog
Silicon Labs EFM32WG990F256 LQFP-100 ARM Cortex-M4, low power

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1