Opens in a new tab

CC2520RHDT

2.4GHz ZigBee/802.15.4 transceiver, +5dBm, -98dBm sens, AES-128, QFN-28

12882

Effective Inventory

Image for reference only

Manufacturer Part:

CC2520RHDT

Package:

QFN-28 (5.00 x 5.00 x 0.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CC2520RHDT from Texas Instruments is a 2.4GHz IEEE 802.15.4 ZigBee RF transceiver in a QFN-28 (5x5mm) package. Operating from 1.8V to 3.8V, it provides a complete radio front-end with 97dBm link budget for wireless sensor network and ZigBee applications.

Key Specifications

Frequency 2.4 GHz ISM
Standard IEEE 802.15.4
Data Rate 250 kbps
Output Power +5 dBm (max)
Receiver Sensitivity -98 dBm (typical)
Supply Voltage 1.8 V to 3.8 V
Current (TX) 25.8 mA @ +5dBm
Current (RX) 18.5 mA
Operating Temperature -40C to +85C

Features

  • IEEE 802.15.4 compliant 2.4GHz transceiver
  • +5dBm output power and -98dBm sensitivity for 103dB link budget
  • Hardware AES-128 encryption accelerator
  • Frame handling with auto-ACK and auto-CRC
  • SPI interface for host MCU communication

Applications

  • ZigBee and IEEE 802.15.4 wireless sensor networks
  • Home and building automation
  • Industrial wireless monitoring
  • Smart energy and metering
Product Introduction: CC2520RHDT Product Introduction

The CC2520RHDT from Texas Instruments is a 2.4GHz IEEE 802.15.4 RF transceiver in a QFN-28 (5x5mm) package. The device provides a complete radio front-end with +5dBm maximum output power and -98dBm receiver sensitivity, yielding a 103dB link budget for reliable wireless communication. The hardware AES-128 encryption accelerator offloads security processing from the host MCU. Frame handling features include auto-ACK generation, auto-CRC insertion and checking, and frame filtering. The device communicates with the host MCU via SPI at up to 10MHz. Operating from 1.8V to 3.8V, the CC2520 draws 25.8mA in TX mode at +5dBm and 18.5mA in RX mode. It is designed for ZigBee and IEEE 802.15.4 wireless sensor network applications.

Working Principle: CC2520RHDT Working Principle

The CC2520RHDT implements a complete IEEE 802.15.4 radio transceiver. (1) Transmitter: The O-QPSK modulated baseband signal is upconverted to 2.4GHz by a direct-conversion modulator. The PA amplifies the signal to +5dBm maximum. (2) Receiver: The LNA amplifies the incoming 2.4GHz signal, which is downconverted to a low-IF by a direct-conversion receiver. The baseband processor performs channel filtering, demodulation, and symbol detection. (3) Frame Handler: Hardware automatically adds CRC to transmitted frames and verifies CRC on received frames. Auto-ACK generates acknowledgment frames without MCU intervention. Frame filtering rejects frames not addressed to the node. (4) AES-128: The hardware encryption engine performs AES-128 encryption and decryption for ZigBee network security, processing one 16-byte block per 22us. (5) SPI: The host MCU writes configuration registers and reads/writes FIFO data via SPI at up to 10MHz.

Pin Description: CC2520RHDT Pin Definition and Functions
Pin Name Type Function
1-4 RF_P/N Analog RF differential I/O to antenna
5-8 SPI (CS/CLK/MOSI/MISO) Digital SPI host interface
9 GPIO0-4 I/O General-purpose I/O / FIFO status
10 RESETn Input Active low reset
11 VDD Power Supply (1.8-3.8V)
12 GND Ground Ground
Application Scenarios: In which products and applications is CC2520RHDT used
  • ZigBee wireless sensor networks with hardware AES-128 security
  • Home and building automation with 103dB link budget
  • Industrial wireless monitoring with auto-ACK and frame filtering
  • Smart energy metering with IEEE 802.15.4 compliance
Alternative Models: What chips are recommended as replacements for CC2520RHDT
Manufacturer Part Number Package Notes
TI CC2520RHDR QFN-28 Tape and reel version
TI CC2652R QFN-48 Multi-protocol (ZigBee+BLE+Thread)
Silicon Labs EM357 QFN-48 ZigBee SoC with MCU
NXP JN5169 QFN-56 ZigBee/Thread SoC

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1