Opens in a new tab

ADG1608BRUZ

8-ch mux, 4.5Ohm RON, +/-8V dual supply, TSSOP-16, low distortion signal routing

9195

Effective Inventory

Image for reference only

Manufacturer Part:

ADG1608BRUZ

Package:

TSSOP-16 (5.00 x 4.40 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADG1608BRUZ from Analog Devices is a 4.5 Ohm RON, 8-channel multiplexer in a TSSOP-16 package. Operating from 3.3V to 16V single supply or +/-3.3V to +/-8V dual supply, it provides low distortion signal routing for data acquisition and audio applications.

Key Specifications

RON (typical) 4.5 Ohm
RON (max over temp) 8 Ohm
RON Flatness 1 Ohm
Channels 8:1 multiplexer
Continuous Current 470 mA (max)
Single Supply 3.3 V to 16 V
Dual Supply +/-3.3 V to +/-8 V
Bandwidth 40 MHz
THD+N 0.04% (typical)
Operating Temperature -40C to +125C

Features

  • 4.5 Ohm typical on-resistance with 1 Ohm flatness
  • 470mA continuous current handling
  • Break-before-make switching action
  • 3V logic-compatible inputs (no VL supply required)
  • Ultra-low power dissipation less than 8nW
  • 40MHz bandwidth for wideband signal routing

Applications

  • Data acquisition systems with low distortion requirements
  • Audio signal routing and mixing consoles
  • Medical instrumentation and patient monitoring
  • Automatic test equipment and relay replacement
Product Introduction: ADG1608BRUZ Product Introduction

The ADG1608BRUZ from Analog Devices is a monolithic CMOS analog multiplexer comprising eight single channels in a TSSOP-16 package. The device switches one of eight inputs to a common output as determined by 3-bit binary address lines A0, A1, and A2. An EN input enables or disables the device. The 4.5 Ohm typical on-resistance with 1 Ohm flatness ensures minimal signal distortion, achieving THD+N of 0.04%. The device operates from 3.3V to 16V single supply or +/-3.3V to +/-8V dual supply with 470mA continuous current handling. 3V logic-compatible inputs eliminate the need for a separate VL logic supply. Break-before-make switching prevents channel-to-channel shorting, and ultra-low power dissipation below 8nW makes the device ideal for battery-powered instruments.

Working Principle: ADG1608BRUZ Working Principle

The ADG1608BRUZ uses iCMOS technology combining high-voltage CMOS with low-voltage CMOS. (1) Switch Core: Each of the eight channels contains a CMOS transmission gate that conducts equally well in both directions when on. The transmission gate uses complementary N-channel and P-channel MOSFETs in parallel to minimize on-resistance variation across the analog input range, achieving 1 Ohm flatness. (2) Address Decoding: A 3-to-8 line decoder translates the A0-A2 address inputs into one-of-eight channel select signals. The EN input gates the decoder output, disabling all channels when low. (3) Break-Before-Make: A delay circuit ensures the previously selected channel turns off before the new channel turns on, preventing momentary channel-to-channel shorting. (4) Level Shifting: Internal level shifters translate the 3V logic-level address inputs to the supply-rail levels needed to drive the CMOS switches, eliminating the need for a VL supply.

Pin Description: ADG1608BRUZ Pin Definition and Functions
Pin Name Type Function
1 S1 Analog I/O Source 1 input/output
2 S2 Analog I/O Source 2 input/output
3 S3 Analog I/O Source 3 input/output
4 S4 Analog I/O Source 4 input/output
5 EN Input Enable (active high)
6 A2 Input Address bit 2 (MSB)
7 GND Ground Ground
8 VDD Power Positive supply
9 VSS Power Negative supply
10 A0 Input Address bit 0 (LSB)
11 A1 Input Address bit 1
12-15 S5-S8 Analog I/O Source 5-8 inputs/outputs
16 D Analog I/O Drain (common output)
Application Scenarios: In which products and applications is ADG1608BRUZ used
  • Data acquisition systems requiring low-distortion 8-channel multiplexing
  • Audio signal routing with 0.04% THD+N in mixing consoles
  • Medical instrumentation and patient monitoring with 470mA current handling
  • Automatic test equipment and relay replacement with break-before-make switching
Alternative Models: What chips are recommended as replacements for ADG1608BRUZ
Manufacturer Part Number Package Notes
ADI ADG1608BCPZ-REEL7 LFCSP-16 Smaller 3x3mm package
Vishay DG408LEDQ-GE3 TSSOP-16 Direct alternative, higher RON
Maxim MAX4617CUD+ TSSOP-16 8:1 mux, similar spec
TI MUX36S08IRTVR TSSOP-16 Low leakage, precision

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1