Opens in a new tab

TL16C752DPFBR

Dual UART, 64-byte FIFO, 10Mbps, RS-232/485/422 selectable, TQFP-48, 2.5-3.3V

5194

Effective Inventory

Image for reference only

Manufacturer Part:

TL16C752DPFBR

Package:

TQFP-48 (7.00 x 7.00 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TL16C752DPFBR from Texas Instruments is a dual UART with 64-byte TX/RX FIFOs and selectable serial interface (RS-232/RS-485/RS-422) in a TQFP-48 package. Operating from 2.5V to 3.3V, it provides two independent UART channels with data rates up to 10Mbps for industrial communication.

Key Specifications

Channels 2 (dual UART)
FIFO Depth 64 bytes TX / 64 bytes RX per channel
Max Data Rate 10 Mbps
Supply Voltage 2.5 V to 3.3 V
Interface Parallel (Intel/Motorola) bus
Operating Temperature -40C to +85C

Features

  • Dual independent UART channels with 64-byte FIFOs
  • Programmable serial interface: RS-232, RS-485, RS-422
  • Data rates up to 10Mbps with 3.3V supply
  • Independent baud rate generators per channel
  • Software/hardware flow control
  • IrDA encoder/decoder support

Applications

  • Industrial multi-protocol communication systems
  • Multi-port serial expansion cards
  • Point-of-sale terminals with dual serial ports
  • Embedded systems requiring RS-232/RS-485 flexibility
Product Introduction: TL16C752DPFBR Product Introduction

The TL16C752DPFBR from Texas Instruments is a dual universal asynchronous receiver/transmitter (UART) with 64-byte transmit and receive FIFOs in a TQFP-48 package. The device provides two independent UART channels, each with a programmable serial interface supporting RS-232, RS-485, and RS-422 modes. Maximum data rate is 10Mbps at 3.3V supply. Each channel has an independent baud rate generator, modem control interface, and programmable serial characteristics (data bits, stop bits, parity). The 64-byte FIFOs reduce CPU interrupt frequency and improve system throughput. Software and hardware flow control options prevent data overflow. The device supports IrDA SIR encoder/decoder for infrared communication. The parallel bus interface is compatible with Intel and Motorola bus timing.

Working Principle: TL16C752DPFBR Working Principle

The TL16C752DPFBR integrates two independent UART channels with FIFO buffering. (1) Transmitter: The CPU writes data to the TX FIFO via the parallel bus interface. The UART shifts data out on the TX pin at the programmed baud rate, adding start bit, parity, and stop bits. When the TX FIFO falls below the programmable threshold, an interrupt or DMA request is generated. (2) Receiver: Serial data on the RX pin is sampled and assembled into characters. The start bit detector synchronizes to the incoming data stream. Received characters are stored in the 64-byte RX FIFO. Framing, parity, and overrun errors are flagged. (3) Baud Rate Generator: Each channel has an independent programmable divisor that divides the reference clock to generate the desired baud rate. (4) Serial Interface: The transceiver control logic selects between RS-232 (single-ended), RS-485 (differential half-duplex), and RS-422 (differential full-duplex) output modes. (5) Flow Control: Hardware flow control uses RTS/CTS signals, while software flow control uses XON/XOFF characters.

Pin Description: TL16C752DPFBR Pin Definition and Functions
Pin Group Name Type Function
1-8 D0-D7 I/O Parallel data bus
9-12 A0-A3/CS Input Address and chip select
13-16 CH_A TX/RX I/O Channel A serial pins
17-20 CH_B TX/RX I/O Channel B serial pins
21-24 MODEM A/B I/O Modem control signals
25-30 INT/DMA Output Interrupt and DMA requests
31-36 VDD/GND Power 2.5/3.3V supply and ground
37-48 CLK/RST/CFG Mixed Clock, reset, config straps
Application Scenarios: In which products and applications is TL16C752DPFBR used
  • Industrial multi-protocol communication systems with RS-232/RS-485/RS-422
  • Multi-port serial expansion cards with 64-byte FIFOs
  • Point-of-sale terminals with dual independent serial ports
  • Embedded systems requiring flexible serial interface selection
Alternative Models: What chips are recommended as replacements for TL16C752DPFBR
Manufacturer Part Number Package Notes
TI TL16C754DPFBR TQFP-64 Quad UART version
Exar XR16C854DV TQFP-48 Quad UART, similar
Maxim MAX3107ETM+ TQFP-28 Single UART, 128-byte FIFO
NXP SC16C752BIA48 TQFP-48 Dual UART, pin compatible

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1