Opens in a new tab

ADG706BRUZ

16-ch mux, 2.5Ohm RON, 1.8-5.5V, 1pC charge injection, TSSOP-28, precision signal routing

14639

Effective Inventory

Image for reference only

Manufacturer Part:

ADG706BRUZ

Package:

TSSOP-28 (9.70 x 4.40 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADG706BRUZ from Analog Devices is a 2.5 Ohm RON, 16-channel multiplexer in a TSSOP-28 package. Operating from 1.8V to 5.5V single supply, it provides low-voltage precision signal routing for portable instruments and data acquisition systems.

Key Specifications

RON (typical) 2.5 Ohm
Channels 16:1 multiplexer
Supply Voltage 1.8 V to 5.5 V
Bandwidth 200 MHz
Charge Injection 1 pC (typical)
Off Leakage 0.5 nA (typical)
Operating Temperature -40C to +85C

Features

  • 2.5 Ohm typical on-resistance for minimal signal attenuation
  • 1.8V to 5.5V low-voltage single-supply operation
  • 1pC low charge injection for precision sampling
  • 0.5nA ultra-low off-leakage current
  • 200MHz bandwidth for wideband signal routing
  • Break-before-make switching prevents channel shorting

Applications

  • Precision data acquisition and measurement systems
  • Medical instrumentation and patient monitoring
  • Battery-powered portable test equipment
  • Audio and video signal routing
Product Introduction: ADG706BRUZ Product Introduction

The ADG706BRUZ from Analog Devices is a 16-channel monolithic CMOS analog multiplexer in a TSSOP-28 package. The device switches one of sixteen inputs to a common output as determined by 4-bit binary address lines A0-A3. The 2.5 Ohm typical on-resistance and 1pC charge injection make it ideal for precision sampling and measurement applications where signal integrity is critical. Operating from 1.8V to 5.5V single supply, the device is designed for low-voltage portable and battery-powered systems. The 0.5nA off-leakage and 200MHz bandwidth support precision and wideband signal routing. Break-before-make switching prevents momentary channel-to-channel shorting during transitions.

Working Principle: ADG706BRUZ Working Principle

The ADG706BRUZ uses a low-voltage CMOS process optimized for precision analog switching. (1) Switch Core: Each of the sixteen channels contains a CMOS transmission gate using complementary N and P-channel MOSFETs. The parallel NMOS/PMOS combination provides low and flat on-resistance across the full analog input range. (2) Address Decoding: A 4-to-16 line decoder translates A0-A3 address inputs into one-of-sixteen channel select signals. The EN input gates the decoder, disabling all channels when low. (3) Charge Injection: The 1pC charge injection is minimized through symmetrical switch geometry and complementary drive signals that cancel injection from the NMOS and PMOS gates. (4) Break-Before-Make: Internal delay ensures the previously selected channel turns off before the new channel turns on.

Pin Description: ADG706BRUZ Pin Definition and Functions
Pin Name Type Function
1-8 S1-S8 Analog I/O Source inputs 1-8
9 EN Input Enable (active high)
10 A0 Input Address bit 0 (LSB)
11 A1 Input Address bit 1
12 A2 Input Address bit 2
13 A3 Input Address bit 3 (MSB)
14 GND Ground Ground
15 D Analog I/O Drain (common output)
16-23 S9-S16 Analog I/O Source inputs 9-16
24-28 VDD/NC Power Supply and no-connect pins
Application Scenarios: In which products and applications is ADG706BRUZ used
  • Precision data acquisition with 1pC charge injection and 0.5nA leakage
  • Medical instrumentation and patient monitoring at 1.8-5.5V supply
  • Battery-powered portable test equipment with 16-channel scanning
  • Audio and video signal routing with 200MHz bandwidth
Alternative Models: What chips are recommended as replacements for ADG706BRUZ
Manufacturer Part Number Package Notes
ADI ADG726BCPZ LFCSP-28 Dual 16:1 mux, similar
Maxim MAX4617CUD+ TSSOP-16 8:1 mux, higher voltage
Vishay DG406DY-T1-E3 SOIC-28 16:1 mux, higher RON
TI MUX36S16IRTVR TQFP-28 16:1, low leakage precision

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1