Opens in a new tab

LF444CMX/NOPB

Quad JFET op-amp, 100pA Ibias, 1MHz GBW, 0.4mA/ch, SOIC-14, low power

9971

Effective Inventory

Image for reference only

Manufacturer Part:

LF444CMX/NOPB

Package:

SOIC-14 (8.75 x 3.90 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LF444CMX/NOPB from Texas Instruments is a quad low-power JFET-input operational amplifier in a SOIC-14 package. With 100pA input bias current and 1MHz GBW, it provides high-impedance input interfacing for sensor and photodiode applications.

Key Specifications

Channels 4 (quad)
Gain-Bandwidth 1 MHz
Input Bias Current 100 pA (typical)
Supply Voltage +/-5 V to +/-18 V
Slew Rate 1 V/us
Supply Current 0.4 mA per amplifier
Operating Temperature -40C to +85C

Features

  • 100pA ultra-low input bias current for high-impedance sensors
  • JFET input stage for low-noise precision applications
  • 0.4mA per-amplifier supply current (1/10 of TL074)
  • Pin-compatible with TL074 and LM348
  • 1MHz GBW for general-purpose signal conditioning

Applications

  • Photodiode and photovoltaic transimpedance amplifiers
  • pH electrode and high-impedance sensor interfaces
  • Low-power battery-operated instrumentation
  • Active filters for low-frequency signals
Product Introduction: LF444CMX/NOPB Product Introduction

The LF444CMX/NOPB from Texas Instruments is a quad low-power JFET-input operational amplifier in a SOIC-14 package. The JFET input stage provides 100pA typical input bias current, making the device ideal for interfacing with high-impedance sensors such as photodiodes, pH electrodes, and piezoelectric transducers. The 1MHz gain-bandwidth product and 1V/us slew rate support general-purpose signal conditioning. Supply current is only 0.4mA per amplifier, approximately one-tenth of the popular TL074, making the LF444 suitable for battery-operated instruments. The device operates from +/-5V to +/-18V dual supplies and is pin-compatible with the TL074 and LM348, allowing direct substitution in low-power applications. Offset voltage is typically 3mV with 10uV/C drift.

Working Principle: LF444CMX/NOPB Working Principle

The LF444CMX/NOPB uses a JFET input stage with bipolar output for low-power precision amplification. (1) JFET Input: A matched JFET differential pair provides the 100pA input bias current and high input impedance (10^12 Ohms typical). The JFETs operate in the constant-current region, providing low noise (15nV/sqrtHz) and low input bias current independent of common-mode voltage. (2) Gain Stage: A common-emitter gain stage provides approximately 100dB open-loop gain. Internal compensation (30pF capacitor) ensures stability at unity gain with capacitive loads up to approximately 100pF. (3) Output Stage: A class-AB bipolar output stage swings to within approximately 1.5V of the supply rails and can source/sink approximately 10mA. (4) Low Power: The bias network is designed for 0.4mA per-amplifier supply current, compared to 1.4mA for the TL074. The reduced bias current trades bandwidth for power savings, making the device ideal for battery-powered applications.

Pin Description: LF444CMX/NOPB Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Channel A output
2 1IN- Input Channel A inverting input
3 1IN+ Input Channel A non-inverting input
4 V+ Power Positive supply
5 2IN+ Input Channel B non-inverting input
6 2IN- Input Channel B inverting input
7 2OUT Output Channel B output
8 3OUT Output Channel C output
9 3IN- Input Channel C inverting input
10 3IN+ Input Channel C non-inverting input
11 V- Power Negative supply
12 4IN+ Input Channel D non-inverting input
13 4IN- Input Channel D inverting input
14 4OUT Output Channel D output
Application Scenarios: In which products and applications is LF444CMX/NOPB used
  • Photodiode and photovoltaic transimpedance amplifiers with 100pA bias
  • pH electrode and high-impedance sensor interfaces at 0.4mA per channel
  • Low-power battery-operated instrumentation with 1MHz GBW
  • Active filters for low-frequency signals in portable equipment
Alternative Models: What chips are recommended as replacements for LF444CMX/NOPB
Manufacturer Part Number Package Notes
TI TL074CDR SOIC-14 Higher speed (3MHz), higher Iq
TI LF347DR SOIC-14 Similar JFET, higher Iq
ADI ADA4075-4ARUZ TSSOP-14 Precision quad JFET
Microchip MCP6H04-E/SN SOIC-14 RRIO, low power CMOS

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1