Opens in a new tab

AMC1100DWV

Isolation amplifier, +/-250mV input, gain 8, 4250Vpk isolation, SOIC-8 DWV, shunt current sensing

6917

Effective Inventory

Image for reference only

Manufacturer Part:

AMC1100DWV

Package:

SOIC-8 DWV Wide Body (7.50 x 5.85 x 2.80 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AMC1100DWV from Texas Instruments is a fully-differential isolation amplifier with 4250V peak basic isolation in a wide-body SOIC-8 package. Optimized for shunt-based current sensing with +/-250mV input and fixed gain of 8, it enables accurate current measurement in high-voltage power systems.

Key Specifications

Input Voltage Range +/-250 mV
Fixed Gain 8 (0.5% accuracy)
Isolation Voltage 4250 Vpeak / 3000 Vrms
Nonlinearity 0.075% max
Input Bandwidth 60 kHz (min)
CMRR 108 dB
Operating Temperature -40C to +105C

Features

  • +/-250mV input optimized for direct shunt resistor connection
  • Fixed gain of 8 with 0.5% accuracy for precise measurement
  • 4250Vpeak SiO2 isolation barrier certified per VDE and UL
  • 108dB high common-mode rejection ratio
  • 0.075% maximum nonlinearity for precision applications
  • Low-side operation at 3.3V or 5V supply

Applications

  • Shunt-based current sensing in electricity meters
  • String inverter current measurement
  • Motor drive phase current sensing
  • Industrial power monitoring and measurement
Product Introduction: AMC1100DWV Product Introduction

The AMC1100DWV from Texas Instruments is a precision fully-differential isolation amplifier with a silicon dioxide (SiO2) isolation barrier in a wide-body SOIC-8 (DWV) package. The device is specifically optimized for shunt-resistor-based current sensing with a +/-250mV input voltage range and a fixed gain of 8 with 0.5% accuracy. The SiO2 isolation barrier provides 4250Vpeak basic isolation certified per DIN VDE V 0884-11 and 3005Vrms per UL1577, making it suitable for high-voltage applications with working voltages up to 1200Vpeak. The 108dB common-mode rejection ratio effectively rejects noise on high-side supply lines. The input bandwidth of 60kHz minimum supports mains-frequency current measurement. The output common-mode voltage is automatically adjusted to either 3V or 5V low-side supply, enabling direct interfacing with 3.3V or 5V ADCs. The device operates over the -40C to +105C extended industrial temperature range.

Working Principle: AMC1100DWV Working Principle

The AMC1100DWV uses a sigma-delta modulator and SiO2 isolation barrier for precision isolated measurement. (1) Input Stage: The high-side input accepts differential signals up to +/-250mV, directly compatible with shunt resistor voltage drops. The input is sampled by a second-order sigma-delta modulator clocked by an internal oscillator. (2) Isolation: The digital bitstream from the modulator crosses the SiO2 isolation barrier capacitively. The silicon dioxide dielectric provides high insulation resistance and excellent magnetic field immunity, unlike optocoupler-based isolators. The barrier is certified to 4250Vpeak per VDE and 3005Vrms per UL1577. (3) Output Stage: On the low side, a third-order sinc filter reconstructs the analog signal with fixed gain of 8. The differential output swings around an auto-adjusted common-mode voltage of VDD2/2. (4) CMRR: The 108dB CMRR is achieved by the fully-differential signal path and the capacitive isolation barrier, which does not couple common-mode signals.

Pin Description: AMC1100DWV Pin Definition and Functions
Pin Name Type Function
1 VDD1 Power High-side supply (5V)
2 VINP Input Positive differential input
3 VINN Input Negative differential input
4 GND1 Ground High-side ground
5 GND2 Ground Low-side ground
6 VOUTN Output Negative differential output
7 VOUTP Output Positive differential output
8 VDD2 Power Low-side supply (3.3V or 5V)
Application Scenarios: In which products and applications is AMC1100DWV used
  • Shunt-based current sensing in electricity meters with 4250V isolation
  • String inverter current measurement with 108dB CMRR
  • Motor drive phase current sensing with +/-250mV direct shunt input
  • Industrial power monitoring at 1200Vpeak working voltage
Alternative Models: What chips are recommended as replacements for AMC1100DWV
Manufacturer Part Number Package Notes
TI AMC1301DWVR SOIC-8 DWV +/-250mV, enhanced isolation
TI AMC1311BQDWVRQ1 SOIC-8 DWV Automotive, +/-2V input
Infineon 1ED3321MC12M DSO-16 Isolated gate driver with sense
Broadcom ACPL-C799-000E SOIC-8 Isolated ADC, sigma-delta

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1