Product Overview
The SN65HVD234DR from Texas Instruments is a 3.3V CAN bus transceiver with sleep mode in a SOIC-8 package. Compliant with ISO 11898-2, it supports data rates up to 1Mbps with +/-36V bus fault protection and 50nA ultra-low sleep current for energy-sensitive applications.
Key Specifications
| Supply Voltage | 3.0 V to 3.6 V |
| Data Rate | 1 Mbps (max) |
| Bus Fault Protection | +/-36 V |
| Common-Mode Range | -7 V to +12 V |
| Sleep Current | 50 nA (typical) |
| Standby Current | 200 uA (typical) |
| Operating Temperature | -40C to +85C |
Features
- 3.3V single supply with 5V-tolerant LVTTL I/O
- ISO 11898-2 compliant CAN transceiver
- 50nA ultra-low sleep current for battery-powered nodes
- Adjustable driver slew rate for EMI optimization
- 120-node bus support with high input impedance
- Industrial automation CAN bus (CANopen, DeviceNet)
- Building HVAC and temperature control networks
- Automotive body electronics CAN networks
- Battery-powered wireless CAN sensor nodes
- Industrial automation CAN bus with +/-36V fault protection and 1Mbps rate
- Building HVAC and temperature control networks at 3.3V supply
- Automotive body electronics CAN networks with slew rate control
- Battery-powered CAN sensor nodes with 50nA sleep mode
Applications
Product Introduction: SN65HVD234DR Product Introduction
The SN65HVD234DR from Texas Instruments is a 3.3V CAN bus transceiver with ultra-low-power sleep mode in a SOIC-8 package. Compliant with ISO 11898-2 and GIFT/ICT standards, the device provides reliable differential CAN bus communication at data rates up to 1Mbps. The bus pins feature +/-36V fault protection and +/-16kV HBM ESD protection for operation in harsh industrial environments. The extended common-mode range of -7V to +12V ensures reliable communication in the presence of ground shifts. The SN65HVD234 variant features an enable (EN) pin that places the device into an ultra-low-power sleep mode with only 50nA typical current consumption, ideal for battery-powered and always-on CAN nodes. The Rs pin provides three operating modes: high-speed (Rs = GND), slew-rate control (Rs = resistor to GND), and standby/listen-only (Rs = VCC). High input impedance supports up to 120 nodes on the bus. LVTTL I/O pins are 5V tolerant.
Working Principle: SN65HVD234DR Working Principle
The SN65HVD234DR converts between TTL logic levels and CAN bus differential signals. (1) Driver: When the D input is logic low, the driver pulls CANH high and CANL low (domant state). When D is high, both outputs are high-impedance (recessive state). The driver output is controlled by the EN pin – driving EN low disables the driver. (2) Receiver: The receiver detects the differential voltage between CANH and CANL. If V(CANH) – V(CANL) >= 0.9V, the R output is low (dominant). If V(CANH) – V(CANL) <= 0.5V, R is high (recessive). The receiver remains active in standby mode for listen-only operation. (3) Slew Rate: The Rs pin controls driver slew rate. Rs = GND enables fastest transitions. A resistor to GND limits the slew rate to reduce EMI. Rs = VCC enters standby mode. (4) Sleep Mode: When EN is driven low, both driver and receiver are disabled. The 50nA sleep current makes this suitable for battery-powered nodes that wake on bus activity.
Pin Description: SN65HVD234DR Pin Definition and Functions
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D | Input | Driver data input (TTL/CMOS) |
| 2 | GND | Ground | Ground |
| 3 | VCC | Power | 3.3V supply |
| 4 | R | Output | Receiver data output |
| 5 | EN | Input | Enable (high = normal, low = sleep) |
| 6 | CANL | I/O | CAN bus low line |
| 7 | CANH | I/O | CAN bus high line |
| 8 | Rs | Input | Slew rate control / standby select |
Application Scenarios: In which products and applications is SN65HVD234DR used
Alternative Models: What chips are recommended as replacements for SN65HVD234DR
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| TI | SN65HVD230DR | SOIC-8 | Loopback mode variant |
| TI | SN65HVD235DR | SOIC-8 | Autobaud loopback variant |
| TI | TCAN334GDR | SOIC-8 | 3.3V CAN FD, 5Mbps |
| NXP | TJA1043T/1J | SOIC-8 | 3.3V/5V CAN, sleep mode |
Recommend Parts

W25Q80VSSI
8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V
Brand: Winbond
Package: SOIC-8 208mil (5.3×8.0mm)
IN STOCK: 4316pcs
Cargo cycle: 3-7 Days
The minimum order is 1

AT89S51
8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.
Brand: Atmel (Microchip)
Package: PDIP-40 / TQFP-44 / PLCC-44
IN STOCK: 15000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

GD32F303CBT6
Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48
Brand: gigadevice
Package: LQFP-48 (7x7mm, 0.5mm pitch)
IN STOCK: 3342pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MIC5205-3.3YM5-TR
3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5
Brand: MICROCHIP
Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)
IN STOCK: 9858pcs
Cargo cycle: 3-7 Days
The minimum order is 1








