Opens in a new tab

MAX232ESE+T

Dual RS-232 tx/rx, 5V supply, +/-9V output, charge pump, SOIC-16, 120kbps

4769

Effective Inventory

Image for reference only

Manufacturer Part:

MAX232ESE+T

Package:

SOIC-16 (9.90 x 3.90 x 1.37 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX232ESE+T from Analog Devices (Maxim Integrated) is a dual RS-232 driver/receiver with integrated charge pump in a SOIC-16 package. Operating from a single 5V supply, it generates +/-9V RS-232 levels without external bipolar supplies for serial communication up to 120kbps.

Key Specifications

Transmitters 2
Receivers 2
Data Rate 120 kbps (max)
Supply Voltage 4.5 V to 5.5 V
Output Voltage +/-9 V (typical)
ESD Protection 2 kV HBM
Operating Temperature -40C to +85C

Features

  • Integrated charge pump eliminates need for +/-12V supplies
  • 2 drivers and 2 receivers for full-duplex RS-232 communication
  • +/-9V output swing from single 5V supply
  • 1uF charge pump capacitors (4 external caps required)
  • +/-30V receiver input tolerance for robustness
  • Industry-standard pinout compatible with ICL232 and HIN232

Applications

  • Microcontroller UART to RS-232 serial communication
  • Legacy PC COM port interface circuits
  • Industrial PLC serial communication ports
  • Point-of-sale terminal serial interfaces
Product Introduction: MAX232ESE+T Product Introduction

The MAX232ESE+T from Analog Devices (formerly Maxim Integrated) is a dual RS-232 driver/receiver with integrated charge pump in a SOIC-16 tape-and-reel package. The device operates from a single 4.5V to 5.5V supply and uses an internal charge pump to generate the +/-9V voltage levels required for TIA/EIA-232-F communication, eliminating the need for external bipolar +/-12V supplies. The device includes two transmitter drivers that convert TTL/CMOS logic levels to RS-232 levels, and two receivers that convert RS-232 levels back to TTL/CMOS. The receivers feature 1.3V typical threshold with 0.5V hysteresis for noise immunity, and can accept input voltages up to +/-30V. Only four external 1uF capacitors are required for the charge pump. The device supports data rates up to 120kbps and is compliant with TIA/EIA-232-F and ITU V.28 standards. ESD protection exceeds 2kV HBM per JESD22-A114.

Working Principle: MAX232ESE+T Working Principle

The MAX232ESE+T uses an integrated charge pump to generate bipolar RS-232 voltages from a single 5V supply. (1) Charge Pump: A dual charge pump circuit uses four external 1uF capacitors to generate V+ (approximately +9V) and V- (approximately -9V) from the 5V VCC supply. The first stage doubles VCC to generate V+, and the second stage inverts V+ to generate V-. An internal oscillator drives the charge pump switching at approximately 25kHz. (2) Drivers: Each of the two drivers converts TTL/CMOS input levels (0-5V) to RS-232 output levels (+/-9V). When the driver input is TTL high, the output is approximately -9V (RS-232 space). When the driver input is TTL low, the output is approximately +9V (RS-232 mark). The output slew rate is approximately 4V/us, limiting the maximum data rate to approximately 120kbps while maintaining compliance with RS-232 transition requirements. (3) Receivers: Each receiver converts RS-232 input levels (+/-3V to +/-15V) to TTL/CMOS logic levels (0-5V). The receiver threshold is 1.3V with 0.5V hysteresis, providing noise immunity. The receivers tolerate input voltages up to +/-30V.

Pin Description: MAX232ESE+T Pin Definition and Functions
Pin Name Type Function
1 C1+ Cap Charge pump capacitor 1 positive
2 V+ Power +9V generated supply
3 C1- Cap Charge pump capacitor 1 negative
4 C2+ Cap Charge pump capacitor 2 positive
5 C2- Cap Charge pump capacitor 2 negative
6 V- Power -9V generated supply
7 T2OUT Output Driver 2 RS-232 output
8 R2IN Input Receiver 2 RS-232 input
9 R2OUT Output Receiver 2 TTL output
10 T2IN Input Driver 2 TTL input
11 T1IN Input Driver 1 TTL input
12 R1OUT Output Receiver 1 TTL output
13 R1IN Input Receiver 1 RS-232 input
14 T1OUT Output Driver 1 RS-232 output
15 GND Ground Ground
16 VCC Power +5V supply
Application Scenarios: In which products and applications is MAX232ESE+T used
  • Microcontroller UART to RS-232 serial communication at 120kbps
  • Legacy PC COM port interface circuits with +/-9V output
  • Industrial PLC serial communication ports with 1uF charge pump caps
  • Point-of-sale terminal serial interfaces with +/-30V input tolerance
Alternative Models: What chips are recommended as replacements for MAX232ESE+T
Manufacturer Part Number Package Notes
TI MAX232DR SOIC-16 TI-branded equivalent
ADI MAX202ESE+T SOIC-16 15kV ESD upgrade, 0.1uF caps
TI TRS3232ECDR SOIC-16 3.3V/5V compatible
Exar SP3232EEN-L/TR SOIC-16 3.0-5.5V, low power

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1