Opens in a new tab

Home » Integrated Circuits ICs, Resistors » ERJ-6ENF1003V

ERJ-6ENF1003V

100kOhm 1% 0.25W thick film resistor, 0805, 100ppm/C TCR, Panasonic ERJ series

10127

Effective Inventory

Image for reference only

Manufacturer Part:

ERJ-6ENF1003V

Package:

0805 (2.00 x 1.25 x 0.60 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ERJ-6ENF1003V from Panasonic is a 100kOhm, +/-1%, 0.25W thick film chip resistor in a 0805 package. The higher 100kOhm value suits high-impedance bias networks, low-power feedback dividers, and discharge paths in precision analog circuits.

Key Specifications

Resistance 100 kOhm
Tolerance +/-1%
Power Rating 0.25 W (1/4W)
Temperature Coefficient +/-100 ppm/C
Working Voltage 150 V (max)
Operating Temperature -55C to +155C

Features

  • 100kOhm with +/-1% tolerance for high-impedance precision circuits
  • 0.25W power rating in 0805 compact footprint
  • +/-100 ppm/C TCR for stability over temperature
  • Thick film element for reliable, cost-effective performance
  • Panasonic ERJ series with automotive-grade quality heritage
  • Lead-free compatible with modern soldering processes

Applications

  • High-impedance bias networks in op-amp circuits
  • Low-power feedback voltage dividers in battery-powered devices
  • Discharge and bleed resistors for capacitor circuits
  • Precision timing networks in low-frequency oscillators
Product Introduction: ERJ-6ENF1003V Product Introduction

The ERJ-6ENF1003V from Panasonic is a 100kOhm, +/-1% tolerance, 0.25W (1/4W) thick film chip resistor in a 0805 surface-mount package. The 100kOhm resistance value is commonly used in high-impedance circuits including op-amp bias networks, low-current feedback dividers, capacitor discharge paths, and precision timing networks. The +/-1% tolerance ensures accurate resistance values in circuits where the high impedance makes even small percentage errors significant. The +/-100 ppm/C TCR provides stability over the wide -55C to +155C operating range. At 100kOhm and 0.25W, the maximum continuous voltage is approximately 158V (limited by the 150V working voltage rating), and the maximum continuous current is approximately 1.58mA. The thick film construction on alumina substrate provides reliability and cost-effectiveness. The 0805 package is compatible with standard automated pick-and-place assembly equipment.

Working Principle: ERJ-6ENF1003V Working Principle

The ERJ-6ENF1003V uses the same thick film technology as the ERJ-6ENF1002V but with a 100kOhm resistive track. (1) Higher Resistance: The 100kOhm value is achieved through a higher-resistivity thick film paste composition and/or a longer, narrower printed pattern. The resistive paste may use a lower concentration of conductive ruthenium oxide particles in the glass frit matrix to increase resistance. (2) Laser Trimming: Precision laser cuts in the thick film pattern fine-tune the resistance to within +/-1% of the target value. The cuts increase the effective path length of the current flow. (3) Voltage Coefficient: At higher resistance values, the voltage coefficient of resistance (VCR) becomes more significant. The VCR for thick film resistors is typically -20 to -50 ppm/V, meaning resistance decreases slightly at higher applied voltages. For most applications at 100kOhm, this effect is negligible. (4) Power Derating: The 0.25W rating applies up to 70C ambient temperature, with linear derating to zero power at 155C.

Pin Description: ERJ-6ENF1003V Pin Definition and Functions
Pin Name Type Function
1 Terminal 1 Termination Resistor terminal (no polarity)
2 Terminal 2 Termination Resistor terminal (no polarity)
Application Scenarios: In which products and applications is ERJ-6ENF1003V used
  • High-impedance bias networks in op-amp circuits at 100kOhm 1%
  • Low-power feedback voltage dividers in battery-powered devices
  • Discharge and bleed resistors for capacitor circuits at 0.25W
  • Precision timing networks in low-frequency oscillators with 100ppm/C
Alternative Models: What chips are recommended as replacements for ERJ-6ENF1003V
Manufacturer Part Number Package Notes
Yageo RC0805FR-07100KL 0805 100kOhm 1% equivalent
Vishay CRCW0805100KFKEA 0805 100kOhm 1% equivalent
Bourns CR0805-FX-1003ELF 0805 100kOhm 1% equivalent
KOA RK73B2ATTD1003J 0805 100kOhm 5% equivalent

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1