Opens in a new tab

A3950SLPTR-T

30V 2A full-bridge motor driver, 1/8 microstep, PWM current, TSSOP-16, low RDS(on)

12404

Effective Inventory

Image for reference only

Manufacturer Part:

A3950SLPTR-T

Package:

TSSOP-16 (5.00 x 4.40 x 1.00 mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The A3950SLPTR-T from Allegro MicroSystems is a full-bridge motor driver with PWM current control in a TSSOP-16 package. With 30V/2A output and microstepping capability, it drives one bipolar stepper or two DC motors.

Key Specifications

Supply Voltage 3.0 V to 30 V
Output Current 2 A per bridge (continuous)
RDS(on) 0.4 Ohm (HS+LS, typical)
Microstepping Up to 1/8 step
Current Control PWM fixed off-time, adjustable
Operating Temperature -20C to +85C

Features

  • 30V/2A full-bridge with integrated DMOS outputs
  • Internal PWM current control with adjustable off-time
  • Microstepping up to 1/8 step for smooth motor motion
  • 0.4 Ohm total RDS(on) per bridge for low voltage drop
  • Phase/enable or direct PWM input interface options
  • Thermal shutdown and overcurrent protection

Applications

  • Bipolar stepper motor microstepping drive
  • DC motor forward/reverse and speed control
  • Automotive instrument cluster gauge motors
  • Office automation and printer mechanisms
Product Introduction: A3950SLPTR-T Product Introduction

The A3950SLPTR-T from Allegro MicroSystems is a full-bridge PWM motor driver in a TSSOP-16 package. The device integrates four N-channel DMOS transistors in an H-bridge configuration, rated for 30V supply and 2A continuous output current per bridge. The 0.4 Ohm total RDS(on) (high-side plus low-side) minimizes conduction losses at high currents. Internal PWM fixed off-time current regulation controls the motor winding current through an external sense resistor, with programmable blanking time to prevent false current trips during switching transients. The device supports microstepping up to 1/8 step by modulating the PWM duty cycle to regulate the winding current to intermediate levels between full steps, providing smooth and quiet motor operation. The input interface supports both phase/enable mode (2-bit direction and enable) and direct PWM mode for maximum flexibility. Protection features include thermal shutdown with hysteresis, undervoltage lockout, and crossover current protection. The TSSOP-16 package with exposed thermal pad provides adequate power dissipation for the 2A continuous rating.

Working Principle: A3950SLPTR-T Working Principle

The A3950SLPTR-T uses DMOS H-bridge output stages with internal PWM current regulation for microstepping. (1) H-Bridge: Four N-channel DMOS transistors in an H configuration drive current through the motor winding in both directions. The 0.4 Ohm total RDS(on) keeps conduction losses low at 2A. (2) PWM Current Control: An external sense resistor in the ground return measures the winding current. When the current exceeds the trip point (set by sense resistor and reference voltage), the bridge enters the off-time phase where the current decays through a recirculation path. After the fixed off-time, the bridge re-energizes and the cycle repeats. (3) Microstepping: The internal DAC sets the current trip point to intermediate levels corresponding to the desired microstep position. The DAC output follows a sinusoidal pattern across the full step cycle, producing smooth current transitions. (4) Decay Mode: During the off-time, the current decays through either fast decay (opposite FET pair on) or slow decay (same low-side FET on) paths. The device supports selectable decay modes for optimal microstepping performance.

Pin Description: A3950SLPTR-T Pin Definition and Functions
Pin Name Type Function
1 OUT1A Output Bridge output A
2 SENSE Input Current sense resistor
3 RC Input Off-time programming RC network
4 VREF Input Current reference voltage
5-8 CTRL Input Control inputs (phase/enable/PWM)
9 OUT1B Output Bridge output B
10 VBB Power Motor supply (3-30V)
11 VDD Power Logic supply (3-5.5V)
12 GND Ground Ground
Application Scenarios: In which products and applications is A3950SLPTR-T used
  • Bipolar stepper motor microstepping drive at 1/8 step, 2A
  • DC motor forward/reverse and speed control with PWM current
  • Automotive instrument cluster gauge motors with 30V supply
  • Office automation and printer mechanisms with thermal protection
Alternative Models: What chips are recommended as replacements for A3950SLPTR-T
Manufacturer Part Number Package Notes
Allegro A4988SETTR-T TSSOP-28 Popular stepper driver, 1/16 step
TI DRV8833RGWR VQFN-24 Dual H-bridge, 2A
TI DRV8825PWP HTSSOP-28 Stepper, 2.5A, 1/32 step
Toshiba TB67S128FTG QFN-48 Stepper, 1.5A, 1/128 step

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1