Opens in a new tab

OPA4340UA

Quad RRIO CMOS op-amp, 2.5-5.5V, 5.5MHz, 350uA/ch, SOIC-14, 10pA Ib, low power

10159

Effective Inventory

Image for reference only

Manufacturer Part:

OPA4340UA

Package:

SOIC-14 (8.65 x 3.90 x 1.37 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The OPA4340UA from Texas Instruments is a quad single-supply, rail-to-rail CMOS operational amplifier in a SOIC-14 package. With 5.5MHz bandwidth and 350uA supply current per amplifier, it provides precision signal conditioning for battery-powered and low-voltage systems.

Key Specifications

Number of Amplifiers 4 (quad)
Supply Voltage 2.5 V to 5.5 V
Bandwidth 5.5 MHz (GBW)
Slew Rate 6 V/us
Supply Current 350 uA per amplifier (typical)
Input Offset Voltage +/-3 mV (maximum)
Input Bias Current 10 pA (typical)
Operating Temperature -40C to +85C

Features

  • Quad rail-to-rail input/output CMOS op-amp in SOIC-14 package
  • 2.5V-5.5V single-supply operation for battery-powered systems
  • 5.5MHz GBW with 6V/us slew rate for moderate-speed signal processing
  • 350uA per amplifier low supply current for extended battery life
  • 10pA ultra-low input bias current for high-impedance sensor interfaces
  • +/-3mV maximum input offset for precision signal conditioning

Applications

  • Battery-powered instrument signal conditioning with quad channels
  • Portable medical device sensor amplification
  • Low-voltage active filter and buffer circuits
  • Multi-channel data acquisition front-end amplification
Product Introduction: OPA4340UA Product Introduction

The OPA4340UA from Texas Instruments is a quad single-supply, rail-to-rail CMOS operational amplifier in a SOIC-14 package. The device provides four independent op-amps, each featuring rail-to-rail input and output swing, enabling maximum dynamic range in low-voltage single-supply applications. The 2.5V to 5.5V supply range supports direct operation from lithium coin cells, single Li-Ion cells, and standard 3.3V or 5V logic supplies. The 5.5MHz gain-bandwidth product and 6V/us slew rate provide adequate bandwidth for moderate-speed signal conditioning, active filters, and buffer applications. The 350uA typical supply current per amplifier (1.4mA total for the quad) enables extended battery operation in portable instruments. The 10pA typical input bias current makes the device ideal for high-impedance sensor interfaces (pH electrodes, photodiodes, piezoelectric sensors) where input bias current would otherwise cause errors. The +/-3mV maximum input offset voltage is adequate for most signal conditioning applications, and the offset can be nulled in precision applications using the offset null pins. The quad configuration in SOIC-14 provides the most compact layout for multi-channel signal conditioning.

Working Principle: OPA4340UA Working Principle

The OPA4340UA uses a CMOS rail-to-rail input/output architecture. (1) Rail-to-Rail Input: The input stage uses complementary N-channel and P-channel differential pairs in parallel. The N-channel pair is active when the common-mode voltage is near the positive rail, and the P-channel pair is active near the negative rail. This allows the input to swing from the negative supply to the positive supply without phase reversal or gain change. (2) Rail-to-Rail Output: The output stage uses a common-source PMOS-NMOS push-pull configuration. The PMOS pulls the output to the positive rail, and the NMOS pulls it to the negative rail. The output can swing to within a few millivolts of each rail under light load. (3) CMOS Advantages: The CMOS input stage provides the ultra-low 10pA input bias current, eliminating the microampere bias currents of bipolar input op-amps. This is critical for high-impedance sensor interfaces. (4) Frequency Compensation: Internal dominant-pole compensation provides stable operation for unity-gain and higher closed-loop gains without external compensation components.

Pin Description: OPA4340UA Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Amplifier 1 output
2 1IN- Input Amplifier 1 inverting input
3 1IN+ Input Amplifier 1 non-inverting input
4 V+ Power Positive supply (2.5-5.5V)
5 2IN+ Input Amplifier 2 non-inverting input
6 2IN- Input Amplifier 2 inverting input
7 2OUT Output Amplifier 2 output
8 3OUT Output Amplifier 3 output
9 3IN- Input Amplifier 3 inverting input
10 3IN+ Input Amplifier 3 non-inverting input
11 V- Power Negative supply (GND for single supply)
12 4IN+ Input Amplifier 4 non-inverting input
13 4IN- Input Amplifier 4 inverting input
14 4OUT Output Amplifier 4 output
Application Scenarios: In which products and applications is OPA4340UA used
  • Battery-powered instrument signal conditioning with quad channels at 350uA/ch
  • Portable medical device sensor amplification with 10pA input bias current
  • Low-voltage active filter and buffer circuits with rail-to-rail I/O
  • Multi-channel data acquisition front-end amplification in SOIC-14
Alternative Models: What chips are recommended as replacements for OPA4340UA
Manufacturer Part Number Package Notes
TI OPA4344UA SOIC-14 1MHz, lower power version
ADI AD8609ARZ SOIC-14 Quad, RRIO, 5MHz
MCP MCP6004-I/SL SOIC-14 1MHz, very low cost
TI OPA4340EA/250 SSOP-16 Same, different package

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1