Opens in a new tab

TLC27L4IDR

Quad LinCMOS op-amp, 10uA/ch, 85kHz, SOIC-14, input to V-, 10mV Vos, 60pA Ibias

9902

Effective Inventory

Image for reference only

Manufacturer Part:

TLC27L4IDR

Package:

SOIC-14 (8.65 x 6.00 x 1.50 mm, D package)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLC27L4IDR from Texas Instruments is a quad LinCMOS precision operational amplifier in a SOIC-14 package. With 10uA per channel supply current and 85kHz GBW, it provides ultra-low power operation with input common-mode range extending below the negative rail.

Key Specifications

Supply Current 10 uA per channel typical
Gain Bandwidth 85 kHz
Slew Rate 0.03 V/us
Input Offset Voltage 10 mV max at 25C
Input Offset Drift 0.1 uV/month typical
Input Bias Current 60 pA max
CMRR 94 dB typical
Supply Voltage 4 V to 16 V (industrial temp)
Operating Temperature -40C to +85C

Features

  • Quad CMOS op-amp with 10uA/ch ultra-low supply current for battery-powered designs
  • Input common-mode range extends below negative rail for single-supply operation
  • 0.1uV/month offset voltage drift with LinCMOS silicon-gate technology
  • 10^12 Ohm high input impedance with 60pA max input bias current
  • Output voltage range includes negative rail for true single-supply operation
  • 94dB CMRR and internal ESD protection circuitry

Applications

  • Battery-powered instrumentation with 10uA/ch ultra-low power consumption
  • Single-supply sensor conditioning with input below negative rail capability
  • Low-frequency signal processing at 85kHz GBW with high CMRR
  • Portable medical and industrial monitoring with 0.1uV/month stability
Product Introduction: TLC27L4IDR Product Introduction

The TLC27L4IDR from Texas Instruments is a quad LinCMOS precision operational amplifier in a SOIC-14 package. The TLC27Lx family combines various input offset voltage grades, low offset voltage drift, high input impedance, ultra-low power consumption, and high gain in a single device. The L-suffix (TLC27L4) provides 10mV max offset voltage at the lowest power consumption of 10uA per channel typical at 5V supply, resulting in total quiescent power of only 195uW for all four amplifiers. The LinCMOS silicon-gate process provides offset voltage stability far exceeding that available with conventional metal-gate CMOS processes, with typical drift of only 0.1uV/month including the first 30 days. The input common-mode voltage range extends 0.3V below the negative supply rail, enabling true single-supply operation with ground-referenced input signals. The output voltage range includes the negative rail, allowing the output to swing to ground in single-supply configurations. The 10^12 Ohm typical input impedance and 60pA max input bias current make the device ideal for high-impedance sensor interfaces. The 94dB typical CMRR ensures excellent common-mode rejection in differential measurement applications.

Working Principle: TLC27L4IDR Working Principle

The TLC27L4IDR uses TI LinCMOS silicon-gate CMOS technology optimized for precision and low power. (1) CMOS Input Stage: The input differential pair uses P-channel MOSFETs, providing the ultra-low 60pA input bias current and 10^12 Ohm input impedance. The silicon-gate process provides better threshold voltage matching and stability compared to metal-gate CMOS, achieving the 0.1uV/month offset drift. (2) Input Below V-: The input stage is designed with a bias network that allows the input common-mode voltage to extend approximately 0.3V below the negative supply rail. This is achieved by an internal current source that biases the input pair even when the common-mode voltage is at or slightly below V-. (3) Output to V-: The output stage uses a P-channel MOSFET pull-down that can pull the output to within a few millivolts of the negative rail when sinking current, enabling true single-supply operation. (4) Low Power: The internal bias network is set to provide only 10uA per channel. This limits the gain-bandwidth to 85kHz and slew rate to 0.03V/us, but the ultra-low power consumption makes the device ideal for battery-powered applications where bandwidth requirements are modest. (5) Internal Compensation: Each amplifier is internally compensated for unity-gain stability.

Pin Description: TLC27L4IDR Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Amplifier 1 output
2 1IN- Input Amplifier 1 inverting input
3 1IN+ Input Amplifier 1 non-inverting input
4 VDD Power Positive supply (4-16V)
5 2IN+ Input Amplifier 2 non-inverting input
6 2IN- Input Amplifier 2 inverting input
7 2OUT Output Amplifier 2 output
8 3OUT Output Amplifier 3 output
9 3IN- Input Amplifier 3 inverting input
10 3IN+ Input Amplifier 3 non-inverting input
11 VSS/GND Power Negative supply or ground
12 4IN+ Input Amplifier 4 non-inverting input
13 4IN- Input Amplifier 4 inverting input
14 4OUT Output Amplifier 4 output
Application Scenarios: In which products and applications is TLC27L4IDR used
  • Battery-powered instrumentation with 10uA/ch ultra-low power at 195uW total
  • Single-supply sensor conditioning with input below negative rail capability
  • Low-frequency signal processing at 85kHz GBW with 94dB CMRR
  • Portable medical and industrial monitoring with 0.1uV/month offset stability
Alternative Models: What chips are recommended as replacements for TLC27L4IDR
Manufacturer Part Number Package Notes
TI TLC27M4IDR SOIC-14 Medium power, 150uA/ch
TI TLC27H4IDR SOIC-14 High power, 1mA/ch, 2.2MHz
TI TLC27L9IDR SOIC-14 900uV offset, precision grade
TI TLV27L4IDR SOIC-14 3V version, similar

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1