Opens in a new tab

IR2130STRPBF

600V 3-phase bridge driver, 200/420mA, SOIC-28, 2.5us deadtime, ITRIP, FAULT, 6 drivers

5680

Effective Inventory

Image for reference only

Manufacturer Part:

IR2130STRPBF

Package:

SOIC-28 Wide (17.87 x 7.50 x 2.65 mm, 28-SOIC W)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IR2130STRPBF from Infineon (formerly IR) is a 600V 3-phase bridge driver in a 28-SOIC package. With 200mA/420mA source/sink output current, over-current shutdown, and 2.5us internal deadtime, it drives six IGBTs/MOSFETs in 3-phase inverter applications.

Key Specifications

Configuration 3-phase bridge (6 drivers: 3 high-side + 3 low-side)
Offset Voltage 600 V max
Output Current +200 mA / -420 mA (source/sink)
Gate Drive Supply 10 V to 20 V
Propagation Delay 675 ns on / 425 ns off (typical)
Internal Deadtime 2.5 us typical (IR2130)
Over-Current Shutdown Yes (ITRIP, all 6 outputs off)
FAULT Output Open-drain fault indication
Current Sense Amplifier Ground-referenced op-amp
Operating Temperature -40C to +125C

Features

  • 3-phase bridge driver with 3 independent high/low side channels for motor drive
  • 600V bootstrap high-side operation with dV/dt immunity and negative VS tolerance
  • Built-in 2.5us deadtime with cross-conduction prevention logic
  • Over-current shutdown via ITRIP pin disables all six outputs simultaneously
  • Ground-referenced current sense amplifier for analog current feedback
  • Open-drain FAULT output indicates over-current or undervoltage shutdown

Applications

  • 3-phase AC motor and BLDC/PMSM motor drive inverter gate driving
  • UPS and solar inverter 3-phase power stage control
  • Industrial variable frequency drive (VFD) with ITRIP over-current protection
  • Appliance motor control for air conditioner and washing machine compressors
Product Introduction: IR2130STRPBF Product Introduction

The IR2130STRPBF from Infineon (formerly International Rectifier) is a high-voltage, high-speed 3-phase bridge driver IC in a 28-lead wide SOIC package. The device provides three independent high-side and low-side referenced output channels, capable of driving six N-channel power MOSFETs or IGBTs in a 3-phase inverter bridge configuration operating at up to 600V. The proprietary HVIC technology enables ruggedized monolithic construction with dV/dt immunity and tolerance to negative VS transients. The IR2130 features built-in 2.5us typical deadtime with cross-conduction prevention logic, ensuring safe half-bridge operation without shoot-through. A ground-referenced operational amplifier provides analog feedback of bridge current via an external current sense resistor. The ITRIP function terminates all six outputs when an over-current condition is detected, providing comprehensive protection. An open-drain FAULT signal indicates whether an over-current or undervoltage shutdown has occurred. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched across all channels to simplify high-frequency operation. Logic inputs are compatible with CMOS or LSTTL outputs, down to 2.5V logic.

Working Principle: IR2130STRPBF Working Principle

The IR2130STRPBF integrates three half-bridge driver channels with protection and monitoring functions. (1) Three Half-Bridge Channels: Each channel consists of a high-side driver (referenced to the floating VS node) and a low-side driver (referenced to COM). The high-side drivers use bootstrap operation with level-shifting circuits to translate the logic signals across the high-voltage isolation barrier. (2) Deadtime Logic: When the HIN input goes high (requesting high-side on), the device first ensures the low-side output is off, waits for the 2.5us deadtime, then turns on the high-side output. The cross-conduction prevention logic ensures both outputs in a half-bridge are never on simultaneously. (3) Current Sense Amplifier: The internal op-amp amplifies the voltage across an external current sense resistor in the ground return path. The amplified output (CAO) provides analog current feedback to the MCU. (4) Over-Current Shutdown: When the ITRIP pin voltage exceeds the threshold (approximately 0.5V), all six output drivers are immediately disabled. The FAULT pin is pulled low to indicate the shutdown event. (5) UVLO: Undervoltage lockout on both VCC and each bootstrap supply prevents insufficient gate drive voltage.

Pin Description: IR2130STRPBF Pin Definition and Functions
Pin Name Function
1 VCC Logic and low-side supply (10-20V)
2 HIN1 High-side logic input phase 1
3 HIN2 High-side logic input phase 2
4 HIN3 High-side logic input phase 3
5 LIN1 Low-side logic input phase 1
6 LIN2 Low-side logic input phase 2
7 LIN3 Low-side logic input phase 3
8 FAULT Fault output (open drain)
9 CAO Current amplifier output
10 CA- Current amplifier inverting input
11 ITRIP Over-current trip input
12 VSS Logic ground
13-16 LO1-LO3,COM Low-side outputs and power ground
17-28 VS1-3,HO1-3,VB1-3 High-side floating supplies and outputs
Application Scenarios: In which products and applications is IR2130STRPBF used
  • 3-phase AC motor and BLDC/PMSM inverter gate driving at 600V bus
  • UPS and solar inverter 3-phase power stage with ITRIP over-current protection
  • Industrial variable frequency drive (VFD) with 2.5us deadtime
  • Appliance motor control with FAULT output and current sense amplifier
Alternative Models: What chips are recommended as replacements for IR2130STRPBF
Manufacturer Part Number Package Notes
Infineon IR2132STRPBF SOIC-28 0.8us deadtime, faster
Infineon IRS2130DSTRPBF SOIC-28 Newer, integrated bootstrap diode
TI UCC21520DW SOIC-16 Isolated dual channel, not 3-phase
Infineon 6EDL7141 QFN-48 Next-gen 3-phase driver

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1