Opens in a new tab

Home » Analog Linear ICs » LM358N/NOPB

LM358N/NOPB

Dual gen-purpose op-amp, 3-32V, 700kHz GBW, ground-referenced input, 8-PDIP

15800

Effective Inventory

Image for reference only

Manufacturer Part:

LM358N/NOPB

Package:

8-PDIP (9.27 x 6.35 x 4.57 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM358N/NOPB from Texas Instruments is a dual general-purpose operational amplifier with a wide single-supply range of 3V to 32V (or +/-1.5V to +/-16V dual supply), 700kHz gain-bandwidth product, and low input bias current in an 8-pin PDIP through-hole package.

Key Specifications

Channels 2 (Dual)
Supply Voltage 3 V to 32 V (single) or +/-1.5 V to +/-16 V
Gain-Bandwidth Product 700 kHz (typical)
Slew Rate 0.3 V/us (typical)
Input Offset Voltage 2 mV (typical), 7 mV (max)
Input Bias Current 45 nA (typical)
Input Common-Mode Range 0 V to VCC-1.5V
Output Voltage Swing 0 V to VCC-1.5V
Supply Current 0.7 mA (typical, both amps)
Operating Temperature 0°C to +70°C
Package 8-PDIP (through hole)

Features

  • Industry-standard dual op-amp with single-supply operation down to 3V
  • Input common-mode range includes ground for single-supply applications
  • 700kHz gain-bandwidth product and 0.3V/us slew rate for general-purpose use
  • Low 0.7mA total supply current for both amplifiers

Applications

  • General-purpose signal amplification and filtering
  • Single-supply buffer and follower circuits
  • Sensor signal conditioning and low-frequency analog circuits
Product Introduction: LM358N/NOPB Product Introduction

The LM358N/NOPB from Texas Instruments consists of two independent, high-gain, internally frequency-compensated operational amplifiers designed specifically to operate from a single power supply over a wide range of voltages. The device can also operate from split supplies, but the single-supply operation with common-mode input range that includes ground is its distinguishing feature. The LM358 is one of the most widely used general-purpose op-amps in the industry, suitable for transducer amplifiers, DC gain blocks, and conventional op-amp circuits that can be implemented with a single supply. The 8-PDIP through-hole package is ideal for prototyping and educational use. The /NOPB suffix indicates lead-free packaging.

Working Principle: LM358N/NOPB Working Principle

The LM358N/NOPB is a dual bipolar operational amplifier. (1) Differential Input Stage: The input stage uses a PNP differential pair that allows the common-mode input range to extend down to ground (0V), enabling true single-supply operation. The input bias current flows out of the input pins (PNP structure) at approximately 45nA. (2) Gain Stage: The high-voltage gain stage provides the open-loop gain of approximately 100dB. Internal compensation (30pF capacitor) ensures stability in voltage-follower configurations without external components. (3) Output Stage: The class-AB output stage can sink and source current, but the output swing only goes to within approximately 1.5V of the positive rail. The output can sink up to 20mA and source up to 40mA. (4) Single-Supply: The ground-referenced input and ability to operate at 3V make the LM358 ideal for single-supply applications where the signal swings between ground and the positive rail.

Pin Description: LM358N/NOPB Pin Definition and Functions
Pin Name Function
1 1OUT Amplifier 1 output
2 1IN- Amplifier 1 inverting input
3 1IN+ Amplifier 1 non-inverting input
4 GND Ground / negative supply
5 2IN+ Amplifier 2 non-inverting input
6 2IN- Amplifier 2 inverting input
7 2OUT Amplifier 2 output
8 VCC Positive supply (3-32V)
Application Scenarios: In which products and applications is LM358N/NOPB used
  • General-purpose signal amplification and active filtering at 3-32V single supply
  • Single-supply buffer and voltage follower with ground-referenced inputs
  • Sensor signal conditioning and low-frequency analog circuits in PDIP
Alternative Models: What chips are recommended as replacements for LM358N/NOPB
Manufacturer Part Number Package Notes
TI LM358DR SOIC-8 SMD version, same specs
onsemi LM358NG 8-PDIP Pin-compatible, similar
ST LM358N 8-PDIP Pin-compatible, ST brand

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1