Opens in a new tab

LM358N

Dual op-amp, 1.1MHz GBW, 3-32V single supply, GND-referenced input, PDIP-8

15500

Effective Inventory

Image for reference only

Manufacturer Part:

LM358N

Package:

PDIP-8 (9.27 x 6.35 x 4.57 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM358N from Texas Instruments is a dual general-purpose operational amplifier with 1MHz GBW, 0.7V/us slew rate, single-supply operation (3V to 32V), and low input bias current (45nA) in an 8-pin PDIP package.

Key Specifications

Channels 2 (Dual)
Supply Voltage 3 V to 32 V (single), +/-1.5 to +/-16V (dual)
GBW 1.1 MHz
Slew Rate 0.7 V/us
Input Offset Voltage +/-3 mV typical, +/-7 mV max
Input Bias Current 45 nA typical
Output Current +/-20 mA typical
Quiescent Current 0.7 mA per amplifier
CMRR 85 dB typical
Operating Temperature 0°C to +70°C
Package PDIP-8 (through-hole)

Features

  • Dual general-purpose op-amp with single-supply operation from 3V to 32V
  • Input common-mode range includes ground for single-supply applications

Applications

  • General-purpose signal conditioning, filtering, and buffer circuits
Product Introduction: LM358N Product Introduction

The LM358N from Texas Instruments is a dual general-purpose operational amplifier from the industry-standard LM358 family. The device consists of two independent high-gain, internally frequency-compensated op-amps designed to operate from a single supply over a wide range of 3V to 32V (or +/-1.5V to +/-16V dual supplies). A key feature is that the input common-mode voltage range includes ground, allowing the amplifier to operate in single-supply applications without a negative supply. The output voltage can swing to within a few millivolts of ground when driving low-current loads. The 1.1MHz gain-bandwidth product and 0.7V/us slew rate are adequate for many general-purpose audio and instrumentation applications. The 45nA input bias current allows interfacing with high-impedance sources. The N suffix indicates the 8-pin PDIP through-hole package, the most common and cost-effective package for prototyping and low-volume production.

Working Principle: LM358N Working Principle

The LM358N operates as a dual single-supply operational amplifier. (1) Single-Supply Input Stage: The input stage uses a PNP differential pair with the emitters connected to VCC through a current source. This topology allows the input common-mode voltage to extend to ground (0V) because the PNP transistors remain active when both inputs are at ground potential. The maximum common-mode voltage is approximately VCC-1.5V. (2) Output Stage: The output uses a class-AB push-pull configuration with an NPN pull-up transistor and a passive (resistive) pull-down. The resistive pull-down allows the output to swing very close to ground (typically 5mV at low load current), but limits the output sink current compared to the source current. (3) Internal Compensation: A 30pF internal capacitor provides dominant-pole compensation, ensuring stability in unity-gain (voltage follower) configurations without external compensation components. The 1.1MHz GBW product is set by this compensation. (4) Low-Voltage Operation: The LM358 is specified to operate down to 3V single supply, making it suitable for 3.3V and 5V logic-powered systems.

Pin Description: LM358N Pin Definition and Functions
Pin Name Function
1 OUT A Output A
2 IN- A Inverting input A
3 IN+ A Non-inverting input A
4 GND/V- Ground or negative supply
5 IN+ B Non-inverting input B
6 IN- B Inverting input B
7 OUT B Output B
8 VCC/V+ Positive supply (3-32V)
Application Scenarios: In which products and applications is LM358N used
  • General-purpose signal conditioning and filtering with single supply
Alternative Models: What chips are recommended as replacements for LM358N
Manufacturer Part Number Package Notes
TI LM358DR SOIC-8 SMD version, same spec
ST LM358N PDIP-8 ST brand, pin-compatible
onsemi LM358AN PDIP-8 Higher temp grade, 125C

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1