Opens in a new tab

LMX2582RHAR

5.5GHz RF PLL, integrated VCO, 47fs jitter, VQFN-40

3456

Effective Inventory

Image for reference only

Manufacturer Part:

LMX2582RHAR

Package:

VQFN-40 / RHA (6 x 6 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LMX2582RHAR from Texas Instruments is a high-performance wideband RF PLLatinum synthesizer with integrated VCO covering 20MHz to 5.5GHz in a 40-pin VQFN package. Achieving 47fs RMS jitter at 1.8GHz output and -231dBc/Hz normalized PLL noise floor, it delivers industry-leading phase noise for demanding RF applications.

Key Specifications

Output Frequency 20 MHz to 5500 MHz
VCO Phase Noise -144.5 dBc/Hz @ 1MHz offset, 1.8GHz
PLL Noise Floor -231 dBc/Hz normalized
RMS Jitter 47 fs (12kHz-20MHz, 1.8GHz)
Input Frequency Up to 1400 MHz
Phase Detector Rate Up to 200 MHz (400 MHz integer)
Modes Fractional-N and Integer-N
Outputs 2 differential (configurable single-ended)
Supply 3.3 V single supply
Package VQFN-40 (6 x 6 mm)
Operating Temperature -40 to +85 C

Features

  • 20MHz to 5.5GHz continuous output with integrated VCO
  • 47fs RMS jitter at 1.8GHz for ultra-low phase noise systems
  • -231dBc/Hz normalized PLL noise floor, industry-leading
  • 32-bit fractional divider for fine frequency resolution
  • Dual differential outputs programmable from VCO or channel divider
  • Fast calibration option for frequency changes under 25us

Applications

  • 5G small cell and base station LO generation
  • Radar and software-defined radio frequency synthesis
  • Satellite transceiver local oscillator
  • Test and measurement equipment
  • Wideband RF transceiver clock generation
Product Introduction: LMX2582RHAR Product Introduction

The LMX2582RHAR from Texas Instruments is a high-performance wideband PLLatinum RF synthesizer with an integrated VCO covering 20MHz to 5.5GHz. Achieving only 47fs RMS jitter (12kHz to 20MHz) at 1.8GHz output and a -231dBc/Hz normalized PLL noise floor, it delivers industry-leading phase noise performance. The device supports both fractional-N (with 32-bit fractional divider) and integer-N modes, accepts input frequencies up to 1.4GHz, and features dual flexible differential outputs that can be configured independently as single-ended. A programmable low-noise multiplier mitigates integer boundary spurs. The device operates from a single 3.3V supply with integrated LDOs, simplifying power supply design.

Working Principle: LMX2582RHAR Working Principle

The LMX2582RHAR operates as a fractional-N/integer-N PLL frequency synthesizer with integrated VCO. (1) The phase detector compares the divided VCO feedback signal with the reference input, producing a charge pump output that drives the external loop filter. The loop filter voltage controls the VCO frequency to achieve lock. (2) The integrated VCO bank covers the full 3.35-5.5GHz range through automatic band selection calibration. For outputs below 3.35GHz, the channel divider divides the VCO frequency by 2, 4, 8, 16, 32, 48, 64, or 96. (3) In fractional-N mode, the 32-bit fractional divider and MASH modulator allow sub-Hz frequency resolution, while the programmable phase adjustment enables precise phase alignment between multiple synthesizers. The innovative integer boundary spur (IBS) removal technique suppresses spurs when the fractional divider is near an integer value.

Pin Description: LMX2582RHAR Pin Definition and Functions
Pin Group Name Function
1-3 VCC, GND Power and ground
4-5 OSCin_P/N Reference input (differential)
6 REFout Reference output buffer
7 CSB SPI chip select (active low)
8 SDI/O SPI data input/output
9 SCLK SPI clock
10 LD Lock detect output
11-16 RFoutA_P/N Output A (differential)
17-22 RFoutB_P/N Output B (differential)
23-40 VCC, GND, CPout Power, ground, charge pump
Application Scenarios: In which products and applications is LMX2582RHAR used
  • 5G small cell and base station local oscillator with sub-50fs jitter
  • Radar and software-defined radio agile frequency synthesis
  • Satellite transceiver low-phase-noise LO generation
  • Test and measurement equipment wideband signal generation
  • Wideband RF transceiver ADC/DAC clock generation
Alternative Models: What chips are recommended as replacements for LMX2582RHAR
Model Manufacturer Key Difference
LMX2594RHAR TI 15GHz output, higher performance
LMX2582RHAT TI Tray packaging, same silicon
ADF5355BCPZ Analog Devices 13.6GHz, integrated VCO
LMX2592RHAR TI 9.8GHz, similar family
ADF4355-3BCPZ Analog Devices 4GHz output, lower cost

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1