Opens in a new tab

ISO7730FDBQR

3-ch reinforced digital isolator, 3000Vrms, 100Mbps, SSOP-16

7890

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7730FDBQR

Package:

SSOP-16 (5 x 4.9 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO7730FDBQR from Texas Instruments is a high-speed reinforced triple-channel digital isolator with 3/0 channel configuration, 3000Vrms isolation, 100Mbps data rate, and 85kV/us CMTI in SSOP-16 package.

Key Specifications

Channels 3 (3 forward / 0 reverse)
Isolation Rating 3000 Vrms (reinforced)
Data Rate 100 Mbps
CMTI 85 kV/us (minimum)
Propagation Delay 10.7 ns typical
Pulse Width Distortion 2 ns max
Supply Voltage 2.25V to 5.5V per side
Supply Current 1.7 mA per channel @ 1Mbps
Package SSOP-16 (4.9mm wide)
Operating Temperature -40 to +125 C
Safety UL 1577, IEC 60747-17, VDE

Features

  • Reinforced isolation with 3000Vrms rating and 85kV/us CMTI
  • 100Mbps data rate for high-speed digital communication
  • 10.7ns low propagation delay for real-time control
  • Robust EMC performance with low radiated emissions
  • 2.25V to 5.5V wide supply range per side for level translation

Applications

  • Industrial automation isolated SPI communication
  • Motor drive gate driver isolation Medical equipment patient isolation Power supply feedback loop isolation Isolated RS-485/CAN bus interface
Product Introduction: ISO7730FDBQR Product Introduction

The ISO7730FDBQR from Texas Instruments is a high-speed reinforced triple-channel digital isolator in SSOP-16 package. The device provides 3000Vrms reinforced isolation with 85kV/us minimum CMTI, 100Mbps data rate, and 10.7ns typical propagation delay. The 3/0 channel configuration (3 forward, 0 reverse) is ideal for unidirectional signal isolation such as SPI, UART TX, and PWM outputs. The device operates from 2.25V to 5.5V per side, enabling simultaneous voltage level translation across the isolation barrier. The F suffix indicates fail-safe high output, DBQ denotes SSOP-16 package, and R indicates tape and reel.

Working Principle: ISO7730FDBQR Working Principle

The ISO7730FDBQR operates as a capacitive-coupled digital isolator. (1) The isolation barrier uses silicon dioxide (SiO2) capacitors to couple digital signals across the barrier while providing galvanic isolation. The high dielectric strength of SiO2 (500V/um) enables the 3000Vrms reinforced isolation rating in a compact chip-scale construction. (2) Each channel contains an input modulator that encodes the digital signal into high-frequency pulses, transmits them across the capacitive barrier, and a demodulator on the receive side reconstructs the original digital signal. The 100Mbps data rate and 10.7ns propagation delay are achieved through optimized encoding and high-speed comparators. (3) The fail-safe output (F suffix) defaults to logic high when the input side is unpowered, preventing undefined states in the receiver. The 85kV/us CMTI ensures reliable operation in noisy motor drive environments with high common-mode transients.

Pin Description: ISO7730FDBQR Pin Definition and Functions
Pin Name Function
1 VCC1 Side 1 power supply
2 IN1 Channel 1 input
3 IN2 Channel 2 input
4 IN3 Channel 3 input
5-8 GND1 Side 1 ground
9-12 GND2 Side 2 ground
13 OUT3 Channel 3 output
14 OUT2 Channel 2 output
15 OUT1 Channel 1 output
16 VCC2 Side 2 power supply
Application Scenarios: In which products and applications is ISO7730FDBQR used
  • Industrial automation isolated SPI communication between MCU and remote ADC/DAC
  • Motor drive gate driver isolation with 85kV/us CMTI withstand
  • Medical equipment patient-side isolation for safety compliance
  • Power supply feedback loop isolation for isolated DC-DC converters
  • Isolated RS-485/CAN bus digital signal isolation
Alternative Models: What chips are recommended as replacements for ISO7730FDBQR
Model Manufacturer Key Difference
ISO7731FDBQR TI 2/1 channel configuration
ISO7231CDWR TI 25Mbps, older generation, SOIC-16
ADUM1301ARWZ ADI iCoupler, 3-channel, SOIC-16
Si8631BC-B-IS Silicon Labs 3-channel, 150Mbps, QSOP-16
ISO7740FDBQR TI 4-channel version

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1