Opens in a new tab

IS281-4

4-ch optocoupler, 5000Vrms, 16-Pin PDIP through-hole

1890

Effective Inventory

Image for reference only

Manufacturer Part:

IS281-4

Package:

16-Pin PDIP (19.7 x 6.5 x 4.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The IS281-4 from Isocom Components is a 4-channel transistor output optocoupler in 16-pin PDIP through-hole package. Provides 5000Vrms galvanic isolation for industrial signal coupling.

Key Specifications

Channels 4
Isolation Voltage 5000 Vrms
CTR (Current Transfer Ratio) 50% to 300% @ IF=5mA
Input Forward Current 60 mA max
Output Collector Current 50 mA max per channel
Output Collector-Emitter Voltage 80V (BVCEO)
Bandwidth DC to 300 kHz typical
Input-Output Capacitance 0.6 pF typical
Package 16-Pin PDIP (through-hole)
Operating Temperature -55 to +100 C

Features

  • 4 isolated channels in a single 16-pin DIP package
  • 5000Vrms isolation voltage for safety-critical applications
  • Through-hole PDIP package for easy prototyping and repair
  • 80V collector-emitter breakdown voltage for 24V industrial logic
  • Wide CTR range of 50% to 300% for design flexibility

Applications

  • Industrial control signal isolation
  • Power supply feedback loop isolation
  • Medical equipment patient isolation
  • Communication interface ground loop elimination
  • PLC digital I/O module isolation
Product Introduction: IS281-4 Product Introduction

The IS281-4 from Isocom Components 2004 LTD is a 4-channel transistor output optocoupler in 16-pin PDIP through-hole package. Each channel consists of a GaAs infrared LED optically coupled to a silicon NPN phototransistor, providing 5000Vrms galvanic isolation. The 4-channel configuration simplifies multi-signal isolation in a single IC, and the through-hole PDIP package is ideal for prototyping and repairable assemblies. The CTR ranges from 50% to 300% at 5mA forward current, and the 80V BVCEO supports direct interface with 24V industrial logic. This is the through-hole version of the IS281-4GB (which is the SMD/tape-and-reel variant).

Working Principle: IS281-4 Working Principle

The IS281-4 operates as a 4-channel optocoupler. (1) Each channel contains a GaAs infrared LED on the input side and a silicon NPN phototransistor on the output side, separated by an optically transparent insulation layer providing 5000Vrms galvanic isolation. When forward current flows through the LED, it emits infrared light detected by the phototransistor base, generating base current that turns on the transistor. (2) The CTR (Current Transfer Ratio) defines the relationship between LED forward current and phototransistor collector current. At IF=5mA, the CTR ranges from 50% to 300%, meaning the collector current can be 2.5mA to 15mA. The wide CTR range accounts for LED aging and temperature variation across the operating range. (3) The 0.6pF input-output capacitance provides excellent common-mode rejection, preventing high-frequency noise from coupling across the isolation barrier. The DC-to-300kHz bandwidth supports digital logic signals and low-frequency analog coupling.

Pin Description: IS281-4 Pin Definition and Functions
Pin Name Function
1 A1 Channel 1 LED anode
2 C1 Channel 1 phototransistor collector
3 E1 Channel 1 phototransistor emitter
4 A2 Channel 2 LED anode
5 C2 Channel 2 phototransistor collector
6 E2 Channel 2 phototransistor emitter
7 A3 Channel 3 LED anode
8 C3 Channel 3 phototransistor collector
9 E3 Channel 3 phototransistor emitter
10 A4 Channel 4 LED anode
11 C4 Channel 4 phototransistor collector
12 E4 Channel 4 phototransistor emitter
13,16 K1-K4 LED cathodes
Application Scenarios: In which products and applications is IS281-4 used
  • Industrial control signal isolation for PLC digital I/O modules
  • Power supply feedback loop isolation with 5000Vrms safety rating
  • Medical equipment patient isolation for IEC 60601 compliance
  • Communication interface ground loop elimination in RS-232/485
  • Multi-channel motor drive logic isolation with 4 channels per IC
Alternative Models: What chips are recommended as replacements for IS281-4
Model Manufacturer Key Difference
IS281-4GB Isocom SMD / tape and reel version
TLP281-4 Toshiba 4-channel, similar, SOIC-16
PC847 Sharp 4-channel, DIP-16, similar
CNY74-4H Vishay 4-channel, DIP-16, similar
LTV-847 Lite-On 4-channel, DIP-16, equivalent

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1