Opens in a new tab

MAX3232IDR

Dual RS-232 driver/receiver, 250kbps, +/-15kV ESD, SOIC-16

12500

Effective Inventory

Image for reference only

Manufacturer Part:

MAX3232IDR

Package:

SOIC-16 (9.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX3232IDR from Texas Instruments is a 3V to 5.5V dual-channel RS-232 line driver/receiver with +/-15kV ESD protection, operating up to 250kbps in SOIC-16 package.

Key Specifications

Standard TIA/EIA-232-F
Drivers / Receivers 2 / 2
Data Rate 250 kbps
Supply Voltage 3V to 5.5V
Supply Current 300 uA typical
ESD Protection +/-15 kV HBM on bus pins
External Capacitors 4 x 0.1uF
Output Voltage Swing +/-5.4V typical
Slew Rate 6 to 30 V/us
Package SOIC-16 (D suffix)
Operating Temperature -40 to +85 C

Features

  • +/-15kV HBM ESD protection on all RS-232 bus pins
  • Operates from single 3V to 5.5V supply with dual charge pump
  • Only 4 external 0.1uF capacitors required
  • Accepts 5V logic input with 3.3V supply
  • 300uA low supply current for battery-powered systems

Applications

  • Battery-powered RS-232 serial communication
  • PDAs, notebooks, and handheld equipment
  • Industrial RS-232 interface conversion
  • Embedded system debug UART
  • Point-of-sale terminal serial port
Product Introduction: MAX3232IDR Product Introduction

The MAX3232IDR from Texas Instruments is a 3V to 5.5V multichannel RS-232 line driver and receiver with +/-15kV ESD HBM protection on all bus pins. The device consists of two line drivers, two line receivers, and a dual charge-pump circuit. The charge pump and four small 0.1uF external capacitors allow operation from a single 3V to 5.5V supply, generating the +/-5.4V output swing required by the RS-232 standard. The device meets TIA/EIA-232-F requirements and operates at data rates up to 250kbps with 30V/us maximum slew rate. The IDR suffix denotes SOIC-16 package with industrial temperature range and tape and reel packaging.

Working Principle: MAX3232IDR Working Principle

The MAX3232IDR operates as a dual RS-232 transceiver. (1) The internal dual charge pump generates +5.4V (V+) and -5.4V (V-) from the 3V to 5.5V VCC supply using four external 0.1uF capacitors. C1 and C2 form the voltage doublers that generate V+ and V- respectively. These generated rails power the RS-232 driver outputs, producing the +/-5.4V swing required by the TIA/EIA-232-F standard. (2) Each driver converts a TTL/CMOS logic input (0 to VCC) to an RS-232 output level. The driver inverts the signal: a logic low input produces a positive RS-232 output (space), and a logic high input produces a negative RS-232 output (mark). The slew rate is limited to 30V/us maximum to comply with RS-232 specifications and reduce EMI. (3) Each receiver converts an RS-232 input (+/-15V range) to a TTL/CMOS logic output. The receiver threshold has built-in hysteresis (0.3V typical) for noise immunity. The +/-15kV ESD protection on bus pins uses clamping diodes to protect the internal circuitry from electrostatic discharge events.

Pin Description: MAX3232IDR Pin Definition and Functions
Pin Name Function
1 C1+ Charge pump capacitor C1 positive
2 V+ Charge pump output (+5.4V)
3 C1- Charge pump capacitor C1 negative
4 C2+ Charge pump capacitor C2 positive
5 C2- Charge pump capacitor C2 negative
6 V- Charge pump output (-5.4V)
7-8 DOUT2, DOUT1 Driver outputs (RS-232)
9-10 RIN2, RIN1 Receiver inputs (RS-232)
11-12 R1OUT, R2OUT Receiver outputs (TTL)
13-14 DIN1, DIN2 Driver inputs (TTL)
15 GND Ground
16 VCC Power supply (3-5.5V)
Application Scenarios: In which products and applications is MAX3232IDR used
  • Battery-powered RS-232 serial communication in PDAs and handhelds
  • Industrial RS-232 interface conversion from 3.3V/5V logic
  • Embedded system debug UART with +/-15kV ESD protection
  • Point-of-sale terminal serial port with dual charge pump
  • Notebook and laptop serial port with minimal external components
Alternative Models: What chips are recommended as replacements for MAX3232IDR
Model Manufacturer Key Difference
MAX3232EIDR TI +/-15kV IEC-ESD, improved ESD
SP3232EEN-L/TR MaxLinear Pin compatible, similar spec
ST3232EBPR ST Pin compatible, 3V-5.5V
ICL3232EIAZ Renensas +/-15kV IEC ESD, TSSOP
ADM3202ARNZ ADI Similar, single supply, 4×0.1uF

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1