Product Overview
The TPS3813K33DBVR from Texas Instruments is a processor supervisory circuit with window watchdog timer and 2.93V voltage monitoring in SOT-23-6 package for safety-critical systems.
Key Specifications
| Threshold Voltage (VIT) | 2.93 V (monitors 3.3V rail) |
| Supply Voltage | 2V to 6V |
| Supply Current | 9 uA typical |
| Reset Delay | 25 ms fixed (power-on reset) |
| Watchdog Type | Window watchdog (programmable) |
| Watchdog Timeout | 0.25s to 2.5s (programmable via WDT pin) |
| Reset Output | Open-drain, active-low |
| Threshold Accuracy | +/-2.4% |
| Package | SOT-23-6 (DBV suffix) |
| Operating Temperature | -40 to +85 C |
Features
- Window watchdog requires trigger within programmable time window
- 2.93V threshold monitors 3.3V supply rail
- Safety-critical DSP and processor supervision
- Automotive ECU processor monitoring
- Industrial controller window watchdog
- Electricity meter supervisory circuit
- Medical infusion pump safety monitoring
- Safety-critical DSP and processor supervision with window watchdog
- Automotive ECU processor monitoring for ISO 26262 compliance
- Industrial controller window watchdog for SIL-rated systems
- Electricity meter supervisory circuit with 2.93V threshold
- Medical infusion pump safety monitoring with programmable window
Applications
Product Introduction: TPS3813K33DBVR Product Introduction
The TPS3813K33DBVR from Texas Instruments is a processor supervisory circuit with a window watchdog timer designed for safety-critical applications. The device monitors a 3.3V supply rail with a 2.93V threshold voltage (+/-2.4% accuracy) and provides an open-drain reset output. The window watchdog requires the supervised processor to trigger the WDI pin within a programmable time window; triggering too early or too late causes a reset. The watchdog timeout is programmable from 0.25s to 2.5s via the WDT pin (connect to GND, VDD, or external capacitor). The K33 suffix indicates 2.93V threshold for 3.3V rail monitoring. The DBVR suffix denotes SOT-23-6 package with tape and reel.
Working Principle: TPS3813K33DBVR Working Principle
The TPS3813K33DBVR operates as a voltage supervisor with window watchdog. (1) The voltage supervisor monitors VDD through an internal resistor divider compared with a bandgap reference. When VDD drops below the 2.93V threshold, the RESET output asserts low. After VDD rises above the threshold, an internal 25ms timer delays the RESET de-assertion to ensure a proper system reset. (2) The window watchdog provides more stringent supervision than a standard watchdog. The supervised processor must trigger the WDI pin with a falling edge within a defined time window. The upper limit of the window is set by the WDT pin (0.25s, 1s, or 2.5s depending on connection). The lower limit (window ratio) is set by the WDR pin. If the processor triggers WDI too early (below the lower limit) or too late (above the upper limit), a reset is generated. (3) The 9uA supply current enables use in battery-powered systems. The open-drain reset output can be connected to other supervisor outputs in a wired-OR configuration for multi-voltage monitoring.
Pin Description: TPS3813K33DBVR Pin Definition and Functions
| Pin | Name | Function |
|---|---|---|
| 1 | WDT | Watchdog timeout programming |
| 2 | GND | Ground |
| 3 | WDR | Watchdog window ratio setting |
| 4 | RESET | Reset output (open drain, active low) |
| 5 | WDI | Watchdog input (falling edge trigger) |
| 6 | VDD | Supply and sense voltage (2-6V) |
Application Scenarios: In which products and applications is TPS3813K33DBVR used
Alternative Models: What chips are recommended as replacements for TPS3813K33DBVR
| Model | Manufacturer | Key Difference |
|---|---|---|
| TPS3813J25DBVR | TI | 2.25V threshold (monitors 2.5V) |
| TPS3813L30DBVR | TI | 2.64V threshold (monitors 3.0V) |
| TPS3813I50DBVR | TI | 4.55V threshold (monitors 5.0V) |
| TSM1025ILT | ST | Window watchdog, 2.93V, similar |
| MAX6818MJE | ADI | Multi-voltage watchdog, different pkg |
Recommend Parts

MSP432P401RIPZR
Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP
Brand: TI
Package: 100-LQFP (14 x 14 x 1.4mm)
IN STOCK: 3750pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PTN78060WAH
4.5A positive-input buck-IT module, adjustable, SMD module
Brand: TI
Package: Module (34.3 x 19.3 x 8.2 mm)
IN STOCK: 4786pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC16F1526-I/PT
8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP
Brand: MICROCHIP
Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)
IN STOCK: 5600pcs
Cargo cycle: 3-7 Days
The minimum order is 1

R2A20178NP
8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V
Brand: Renesas
Package: 24-pin HWQFN (4x4x0.75mm)
IN STOCK: 6399pcs
Cargo cycle: 3-7 Days
The minimum order is 1

VS-40CPQ100-N3
Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring
Brand: VISHAY
Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)
IN STOCK: 8950pcs
Cargo cycle: 3-7 Days
The minimum order is 1

BSC040N10NS5
OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8
Brand: infineon
Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)
IN STOCK: 10509pcs
Cargo cycle: 3-7 Days
The minimum order is 1






