Opens in a new tab

TLC272CDR

Dual LinCMOS op-amp, 3-16V, 1.8MHz GBW, SOIC-8

12500

Effective Inventory

Image for reference only

Manufacturer Part:

TLC272CDR

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLC272CDR from Texas Instruments is a dual single-supply LinCMOS operational amplifier with rail-to-rail output, 1.8MHz GBW, and 3V to 16V operation in SOIC-8 package.

Key Specifications

Channels 2 (dual)
Supply Voltage 3V to 16V (single supply)
Gain-Bandwidth Product 1.8 MHz
Slew Rate 3.6 V/us
Input Offset Voltage 1.1 mV typical (AC version)
Input Bias Current 1 pA typical
Quiescent Current 1.9 mA per amplifier
Output Swing Rail-to-rail (0V to VDD-0.1V)
CMRR 75 dB typical
Package SOIC-8 (CDR suffix)
Operating Temperature -40 to +85 C (C suffix)

Features

  • Single-supply operation from 3V to 16V
  • Rail-to-rail output swings to within 10mV of GND
  • 1pA ultra-low input bias current
  • 1.8MHz GBW for audio and sensor applications
  • LinCMOS process for low power and high input impedance

Applications

  • Single-supply sensor signal conditioning
  • Battery-powered instrumentation amplifier
  • Audio preamplifier and filter
  • Transimpedance amplifier for photodiodes
  • Low-frequency active filter
Product Introduction: TLC272CDR Product Introduction

The TLC272CDR from Texas Instruments is a dual single-supply LinCMOS operational amplifier in SOIC-8 package. The device operates from a single 3V to 16V supply with rail-to-rail output that swings to within 10mV of ground. The 1.8MHz gain-bandwidth product and 3.6V/us slew rate support audio and medium-speed sensor applications. The 1pA typical input bias current and high input impedance of the LinCMOS process make it ideal for high-impedance sensor interfaces. The CDR suffix denotes SOIC-8 package with commercial/industrial temperature range and tape and reel packaging.

Working Principle: TLC272CDR Working Principle

The TLC272CDR operates as a dual single-supply LinCMOS operational amplifier. (1) The LinCMOS process uses silicon-gate CMOS technology that provides very low input bias current (1pA typical) and high input impedance, making the device suitable for high-impedance sensor interfaces and transimpedance amplifiers. The output stage is designed for single-supply operation, swinging to within 10mV of ground without requiring a negative supply. (2) The 1.8MHz gain-bandwidth product and 3.6V/us slew rate provide adequate bandwidth for audio frequency applications (up to approximately 180kHz at unity gain) and medium-speed sensor signal conditioning. The internal compensation ensures stability with capacitive loads up to several hundred picofarads. (3) The 1.1mV typical input offset voltage (AC version) is suitable for most general-purpose applications. For precision applications, the TLC27M2 or TLC27L2 variants offer lower offset voltage at reduced bandwidth. The 1.9mA per-amplifier quiescent current is moderate for the 1.8MHz GBW, making it suitable for battery-powered systems with 3V minimum supply.

Pin Description: TLC272CDR Pin Definition and Functions
Pin Name Function
1 1OUT Amplifier 1 output
2 1IN- Amplifier 1 inverting input
3 1IN+ Amplifier 1 non-inverting input
4 GND Ground (negative supply)
5 2IN+ Amplifier 2 non-inverting input
6 2IN- Amplifier 2 inverting input
7 2OUT Amplifier 2 output
8 VDD Positive supply (3-16V)
Application Scenarios: In which products and applications is TLC272CDR used
  • Single-supply sensor signal conditioning with 1pA input bias
  • Battery-powered instrumentation amplifier with 3V operation
  • Audio preamplifier and active filter with 1.8MHz GBW
  • Transimpedance amplifier for photodiodes with high impedance
  • Low-frequency active filter with rail-to-rail output
Alternative Models: What chips are recommended as replacements for TLC272CDR
Model Manufacturer Key Difference
TLC27M2CDR TI Lower power, lower bandwidth
TLC27L2CDR TI Ultra-low power, 100kHz GBW
LM358DR TI Bipolar, 1MHz, higher Ibias
MCP6002-I/SN Microchip 1MHz, 1.8-6V, lower power
TLV2462CDR TI 6.4MHz, RR I/O, low power

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1