Opens in a new tab

TPS26630RGET

4.5-60V, 31mΩ, 0.6-6A industrial eFuse with surge protection, adjustable OVP cutoff and active current limiting, VQFN-24

12816

Effective Inventory

Image for reference only

Manufacturer Part:

TPS26630RGET

Package:

VQFN-24 (RGE) 4.00 x 4.00 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS26630RGET from Texas Instruments is a 4.5V to 60V, 31mΩ, 0.6A to 6A industrial eFuse with adjustable overvoltage cutoff and active current limiting. Housed in a 24-pin VQFN (RGE) package measuring 4.00mm × 4.00mm, it integrates a 60V hot-swap FET and provides comprehensive power path protection including surge immunity (IEC 61000-4-5 Class-A), reverse polarity protection, and adjustable output slew rate control for inrush current limiting. The device is UL 2367 recognized and IEC 62368-1 certified, making it ideal for robust industrial applications.

Key Specifications

Input Voltage Range 4.5V to 60V
Absolute Maximum Voltage 67V (75V transient, 10ms)
Integrated FET RON 31mΩ (typical)
Adjustable Current Limit 0.6A to 6A (±7%)
Current Limiting Mode Active current limiting (1× IOL)
Overvoltage Protection Adjustable cutoff
Undervoltage Lockout Adjustable
Reverse Current Blocking 0.17µs (fast)
Current Monitor (IMON) Analog output (±6%)
Quiescent Current (Iq) 1.38mA (typical), 1.7mA (max)
Power Good Output Yes (PGOOD)
Fault Response Auto-retry or latch-off (MODE pin selectable)
Output Slew Rate Control Adjustable via dVdT pin
ESD Protection HBM ±2000V, CDM ±1000V
Operating Temperature -40°C to +125°C
Package VQFN-24 (RGE), 4.00mm × 4.00mm
Thermal Shutdown Yes (TSD)
Certifications UL 2367 (File No. E169910), IEC 62368-1

Features

  • 4.5V to 60V operating voltage with 67V absolute maximum rating
  • Integrated 60V, 31mΩ RON hot-swap FET eliminates external MOSFET
  • 0.6A to 6A adjustable current limit with ±7% accuracy
  • IEC 61000-4-4 EFT immunity and IEC 61000-4-5 surge protection with Class-A system performance
  • Fast reverse current blocking in 0.17µs
  • B-FET driver for external N-channel FET for reverse polarity protection
  • Adjustable UVLO and OVP cutoff thresholds
  • Output slew rate control for inrush current limiting via dVdT pin
  • Thermal regulation loop for charging large and unknown capacitive loads
  • Power Good (PGOOD) output for downstream DC-DC converter control
  • Analog current monitor (IMON) output with ±6% accuracy
  • Selectable overcurrent fault response: auto-retry or latch-off via MODE pin
  • UL 2367 recognized and IEC 62368-1 certified

Applications

  • Programmable Logic Controllers (PLC) power path protection
  • Industrial PCs and automation systems
  • Servo drive auxiliary power supply input protection
  • 24V/48V industrial bus power distribution
  • Priority power multiplexing in redundant supply systems
Product Introduction: TPS26630RGET Product Introduction

The TPS26630RGET is a member of Texas Instruments’ TPS2663x family of industrial eFuse protection devices. It is designed to provide robust power path protection in industrial systems operating from 4.5V to 60V supply rails. The device integrates a 31mΩ hot-swap MOSFET, eliminating the need for an external power switch and significantly reducing solution footprint compared to traditional hot-swap controller plus external FET architectures. The TPS26630 variant features adjustable overvoltage cutoff and active current limiting at 1× IOL without pulse overcurrent support. A key differentiator is the device’s ability to achieve IEC 61000-4-5 Class-A system performance during surge events, enabled by its fast reverse current blocking capability (0.17µs) and B-FET driver for external blocking FETs. The integrated thermal regulation loop allows reliable startup even with large and unknown capacitive loads, while the analog current monitor output (IMON) provides real-time load current visibility with ±6% accuracy. Target applications include PLCs, industrial PCs, servo drives, and any 24V/48V industrial system requiring comprehensive power path protection with regulatory compliance.

Working Principle: TPS26630RGET Working Principle

The TPS26630RGET operates as a fully integrated power path protector with three core subsystems:

1. **Hot-Swap and Inrush Control Subsystem**: At power-up, the internal FET is controlled by the dVdT slew rate circuit. An external capacitor on the dVdT pin sets the output voltage ramp rate, limiting inrush current to charge downstream capacitors. The thermal regulation loop monitors die temperature and modulates the FET gate drive to keep junction temperature within safe limits during startup with large capacitive loads.

2. **Overcurrent and Short-Circuit Protection Subsystem**: The current limit is set by an external resistor on the ILIM pin (RILIM ≥ 3kΩ), establishing a threshold from 0.6A to 6A with ±7% accuracy. During overload, the device actively limits current to the programmed threshold. During a hard short circuit, the fast-acting comparator trips within microseconds to protect downstream circuitry. The MODE pin selects between latch-off and auto-retry fault responses.

3. **Voltage Supervision and Reverse Protection Subsystem**: Adjustable UVLO and OVP circuits monitor the input voltage via resistor dividers on the UVLO and OVP pins, disconnecting the load when input voltage falls outside the programmed window. The B-FET driver controls an external N-channel FET for reverse polarity protection and reverse current blocking in 0.17µs. The PGOOD output signals when the output voltage is valid, enabling coordinated startup of downstream DC-DC converters.

Pin Description: TPS26630RGET Pin Definition and Functions
Pin Name Type Function
1 IN Power Power input, connects to drain of internal FET
2 IN Power Power input, connects to drain of internal FET
3 B_GATE Output Blocking FET gate driver output, connect to gate of external NFET for reverse polarity protection
4 DRV Output Blocking FET fast pulldown switch drive, connect to gate of external pulldown switch
5 IN_SYS Power Power input and device supply voltage; connect to source of external blocking FET or short to IN
6 UVLO Input Undervoltage lockout programming pin, connect resistor divider from IN_SYS
7 OVP Input Overvoltage protection programming pin, connect resistor divider from IN_SYS
8 MODE Input Fault response mode selection: latch-off or auto-retry
9 dVdT Input Output slew rate programming pin, connect external capacitor to GND
10 ILIM Input Current limit programming pin, connect external resistor (RILIM ≥ 3kΩ) to GND
11 PGOOD Output Power good output, active-low open-drain; asserts when output voltage exceeds PGTH threshold
12 FLT Output Fault status output, active-low open-drain; asserts during fault conditions
13 OUT Power Power output, connects to source of internal FET
14 OUT Power Power output, connects to source of internal FET
15 PGTH Input Power good threshold programming pin, connect resistor divider from OUT
16 IMON Output Analog current monitor output, proportional to load current (±6% accuracy)
17 SHDN Input Shutdown control input, active-high; low quiescent current shutdown when asserted
18 GND Ground Device ground connection
19-24 N.C — No internal connection, leave floating
Application Scenarios: In which products and applications is TPS26630RGET used
  • PLC power path protection: Provides hot-swap, overcurrent, overvoltage, and surge protection for 24V PLC backplane power rails with IEC 61000-4-5 Class-A compliance
  • Industrial PC power distribution: Protects multiple power domains with adjustable current limits, voltage supervision, and coordinated startup via PGOOD output
  • Servo drive auxiliary supply input: Safeguards 24V auxiliary power input against reverse polarity, surge transients, and short circuits in motor drive systems
  • Redundant power supply multiplexing: Enables priority-based power mux operation using PGOOD and SHDN pins for seamless supply switchover
  • Industrial fieldbus and sensor power: Protects remote field devices with accurate current monitoring (IMON) and fast fault isolation for system diagnostics
Alternative Models: What chips are recommended as replacements for TPS26630RGET
Manufacturer Part Number Package Notes
TI TPS26631RGET VQFN-24 Same series with 2× pulse overcurrent support
TI TPS26632RGET VQFN-24 35V OVP clamp + power limiting (PLIM pin)
TI LM5069MM-2 VSSOP-10 External FET hot-swap controller, lower integration
Infineon BTS70015-1EPP PG-DSO-8 Smart high-side switch, 1.5mΩ, 42V
onsemi NIS5452MW6TXG DFN-10 2.5A eFuse, 4.5-18V, integrated FET

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1