Opens in a new tab

SN65HVD1050DR

CAN FD transceiver, 5Mbps, VIO pin, SOIC-8

12000

Effective Inventory

Image for reference only

Manufacturer Part:

SN65HVD1050DR

Package:

SOIC-8 (4.90 x 3.90 x 1.25 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN65HVD1050DR from Texas Instruments is a 5Mbps CAN FD transceiver with I/O voltage range support and reference voltage in SOIC-8.

Key Specifications

Data Rate Up to 5 Mbps (CAN FD)
Supply (VCC) 4.5-5.5V
I/O Voltage (VIO) 2.8-5.5V
Common Mode Range +/-12V on bus
ESD +/-12 kV HBM (bus)
Standby Current 4 uA typical
Loop Time 200 ns max
Package SOIC-8
Operating Temperature -40 to +125 C

Features

  • CAN FD fast phase up to 5Mbps
  • VIO pin for 3.3V/5V MCU direct connection
  • 4uA ultra-low standby current
  • +/-12kV ESD on CAN bus pins
  • Reference voltage output (VCC/2)

Applications

  • Automotive CAN FD networks
  • Industrial CAN bus systems
  • Building automation
  • Medical equipment networking
Product Introduction: SN65HVD1050DR Product Introduction

The SN65HVD1050DR from Texas Instruments is a 5Mbps CAN FD transceiver in SOIC-8. The VIO pin allows direct connection to 3.3V or 5V MCU logic without level shifting. The device supports CAN FD fast phase up to 5Mbps and complies with ISO 11898-2. Ultra-low 4uA standby current with bus wake-up capability enables always-on automotive applications. The +/-12kV ESD protection on bus pins provides robustness against automotive transients. A VREF output (VCC/2) is available for bus termination biasing.

Working Principle: SN65HVD1050DR Working Principle

The SN65HVD1050DR operates as a CAN physical layer transceiver. (1) In normal mode, the transmitter converts TXD logic signals from the MCU CAN controller into differential CAN bus signals on CANH and CANL. The receiver converts differential bus signals to RXD logic levels referenced to VIO. The 5Mbps data rate supports CAN FD fast phase. (2) The VIO pin sets the logic voltage level for TXD, RXD, and STB pins, enabling direct connection to 3.3V MCU GPIO without external level shifters. This simplifies PCB design in mixed-voltage systems. (3) In standby mode (STB high), the transceiver enters a 4uA low-power state while monitoring the CAN bus for valid wake-up patterns. When a wake-up is detected, the RXD pin asserts low to signal the MCU. The VREF output provides a VCC/2 reference for terminating split termination networks, reducing common-mode noise. The +/-12V common-mode range and +/-12kV ESD ensure robust operation in automotive environments.

Pin Description: SN65HVD1050DR Pin Definition and Functions
Pin Name Description
1 VIO I/O supply voltage (3.0 V to 5.5 V); sets logic levels for RXD, TXD, and S pins; connect 100 nF bypass cap
2 TXD CAN transmit data input; driven by MCU UART/CAN controller; dominant timeout (TXD DTO) prevents bus lockup
3 RXD CAN receive data output; logic-level output to MCU; active-low dominant, high recessive
4 GND Ground reference; connect to PCB ground plane for thermal and EMI performance
5 VCC Transceiver supply (4.5 V to 5.5 V); connect 100 nF and 4.7 uF bypass capacitors
6 CANL Low-side CAN bus line; connect to bus via common-mode choke and split termination
7 CANH High-side CAN bus line; connect to bus via common-mode choke and split termination
8 S Standby/silent mode select; low = normal, high = standby with 4 uA Icc and bus wake-up

Package: SOIC-8 (D). CAN FD support up to 5 Mbps. ESD: +/-12 kV IEC 61000-4-2 on CANH/CANL. Common-mode range: -30 V to +30 V.

Application Scenarios: In which products and applications is SN65HVD1050DR used
  • Automotive CAN FD Networks: 5 Mbps CAN FD communication between ECUs with 3.3 V MCU interface via VIO pin and +/-12 kV ESD protection on bus lines
  • Industrial CAN Bus: Reliable data exchange in factory automation and process control with 4 uA low-power standby mode and bus wake-up capability
  • Building Automation: BACnet MS/TP and CANopen communication in HVAC controllers with split termination support and wide common-mode range
  • Medical Equipment Networking: Galvanically isolated CAN communication in patient monitoring systems with VIO flexibility for 3.3 V logic interfacing
  • Agricultural Machinery: ISOBUS and J1939 CAN networks in tractors and harvesters with dominant timeout (TXD DTO) preventing bus lockup from MCU faults
Alternative Models: What chips are recommended as replacements for SN65HVD1050DR
Model Manufacturer Key Difference Package Speed
SN65HVD1040DR TI 1Mbps CAN 2.0A version without VIO pin for simpler single-voltage 5V MCU interface SOIC-8 1Mbps
TJA1042T/1J NXP CAN FD transceiver with silent mode in SOIC-8; note NRND status (use TJA1043) SOIC-8 5Mbps
MCP2558FD-H/SN Microchip CAN FD up to 8Mbps without VIO pin in SOIC-8, pin-compatible with MCP2551 SOIC-8 8Mbps
TCAN1042DR TI CAN FD transceiver with ±8kV IEC ESD, 5Mbps, and VIO pin for 3.3V logic supply SOIC-8 5Mbps
TJA1050T NXP 1Mbps CAN High-Speed transceiver without VIO, legacy replacement for PCA82C250 SOIC-8 1Mbps

The SN65HVD1050DR is a 5Mbps CAN FD transceiver with VIO pin for 3.3V MCU interface flexibility. For new designs, the TCAN1042 offers enhanced ESD and same VIO feature. For basic CAN 2.0A at 1Mbps without VIO, the SN65HVD1040 or TJA1050 are simpler alternatives.

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1