Opens in a new tab

MAX3221CAE+T

1Tx/1Rx RS-232 transceiver, AutoShutdown 1µA, 3-5.5V, 235kbps, SSOP-16

6492

Effective Inventory

Image for reference only

Manufacturer Part:

MAX3221CAE+T

Package:

SSOP-16 (0.209″, 5.30mm Width)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX3221CAE+T is a 1-driver/1-receiver RS-232 transceiver from Analog Devices (formerly Maxim Integrated) with AutoShutdown feature. It achieves 1 µA supply current in shutdown mode, operates from +3.0 V to +5.5 V single supply, and requires only 0.1 µF charge-pump capacitors in a 16-pin SSOP package.

Key Specifications

Drivers / Receivers 1 / 1
Protocol RS-232
Data Rate 235 kbps
Supply Voltage +3.0 V to +5.5 V
Shutdown Current 1 µA
AutoShutdown After 30 µs receiver inactivity
Charge-Pump Capacitors 0.1 µF (at 3.3V)
Receiver Hysteresis 300 mV
Duplex Full
Operating Temperature 0°C to +70°C (C grade)
Package SSOP-16 (AE)

Features

  • AutoShutdown achieves 1 µA supply current
  • Operates from +3.0 V to +5.5 V single supply
  • Only 0.1 µF capacitors required at 3.3 V
  • Integrated dual charge pump eliminates ±12 V supply
  • AutoShutdown enabled after 30 µs of receiver inactivity
  • Software shutdown control option
  • INVALID output detects valid RS-232 signal
  • FORCEON/FORCEOFF pins for manual control

Applications

  • Battery-powered equipment
  • Hand-held devices
  • Peripheral interfaces
  • Portable diagnostic equipment
  • Point-of-sale terminals
Product Introduction: MAX3221CAE+T Product Introduction

The MAX3221CAE+T is a 1-driver/1-receiver RS-232 transceiver with Maxim’s revolutionary AutoShutdown feature. When the device does not sense a valid signal level on its receiver inputs for 30 µs, the onboard power supply and drivers shut down, reducing supply current to 1 µA. The system automatically turns on again when a valid RS-232 level is applied to the receiver input. A proprietary, high-efficiency, dual charge-pump power supply and low-dropout transmitter combine to deliver true RS-232 performance from a single +3.0 V to +5.5 V supply. The device requires only 0.1 µF capacitors in 3.3 V operation.

Working Principle: MAX3221CAE+T Working Principle

The MAX3221 uses an integrated dual charge-pump circuit to generate ±5.5 V RS-232 voltage levels from a single +3.0 V to +5.5 V supply. The first charge pump doubles the supply voltage to approximately +5.5 V (V+), while the second inverts this to approximately -5.5 V (V-). The transmitter converts TTL/CMOS logic levels to RS-232 compliant levels using these generated voltages. The receiver converts RS-232 input levels to TTL/CMOS output levels with 300 mV hysteresis for noise immunity. The AutoShutdown circuit monitors receiver inputs; if no valid RS-232 signal is detected for 30 µs, it disables the charge pumps and drivers to save power. The FORCEON and FORCEOFF pins provide manual override of the automatic shutdown. The INVALID output indicates whether a valid RS-232 signal is present.

Pin Description: MAX3221CAE+T Pin Definition and Functions
Pin Name Type Description
1 EN Input Receiver enable (active low)
2 C1+ Analog Voltage doubler capacitor positive
3 V+ Power +5.5V generated by charge pump
4 C1- Analog Voltage doubler capacitor negative
5 C2+ Analog Inverting capacitor positive
6 C2- Analog Inverting capacitor negative
7 V- Power -5.5V generated by charge pump
8 RIN Input RS-232 receiver input
9 ROUT Output TTL/CMOS receiver output
10 INVALID Output Valid RS-232 signal detector output
11 TIN Input TTL/CMOS transmitter input
12 FORCEON Input Force-on override (active high)
13 TOUT Output RS-232 transmitter output
14 GND Power Ground
15 VCC Power Supply voltage (+3.0 to +5.5V)
16 FORCEOFF Input Force-off shutdown (active low)
Application Scenarios: In which products and applications is MAX3221CAE+T used
  • Battery-Powered Devices: 1 µA AutoShutdown current extends battery life when RS-232 cable is disconnected
  • Hand-Held Instruments: Single 3.3V operation and minimal external components reduce system complexity
  • Portable Diagnostics: AutoShutdown automatically powers down when not communicating, preserving battery
  • Point-of-Sale Terminals: INVALID output enables cable detection for hot-plug capability
  • Peripheral Interfaces: 235 kbps data rate supports standard RS-232 communication protocols
Alternative Models: What chips are recommended as replacements for MAX3221CAE+T
Model Manufacturer Key Difference Package Channels
MAX3223CAP+T ADI 2Tx/2Rs version in 20-pin SSOP for applications needing two serial ports SSOP-20 2Tx/2Rx
MAX3243CAI+T ADI 3Tx/5Rx version with always-active receiver for multi-channel serial interfaces SSOP-28 3Tx/5Rx
SP3221ECY-L/TR Silicon Labs Pin-compatible 1Tx/1Rx with equivalent 1uA shutdown and 250kbps data rate TSSOP-16 1Tx/1Rx
ST3221EBPR ST Direct equivalent with 3-5.5V supply and enhanced ±15kV ESD on RS-232 pins TSSOP-16 1Tx/1Rx
TRS3221EIPWR TI 1uA auto-powerdown, ±15kV HBM ESD, 250kbps compatible with 3V logic TSSOP-16 1Tx/1Rx
MAX3221EAE+T ADI Enhanced ESD version with ±15kV IEC 61000-4-2 on all RS-232 pins SSOP-16 1Tx/1Rx

The MAX3221 is a 1Tx/1Rx 3.3V RS-232 transceiver with 1uA auto-powerdown feature. For multi-port applications, MAX3232 (2Tx/2Rx) or MAX3243 (3Tx/5Rx) provide additional channels. All are 3V-5.5V compatible and require only four 0.1uF charge pump capacitors.

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1