Opens in a new tab

AM26LV31EIDR

Quad RS-422 driver, 3.3V, 32MHz, ±15kV ESD, SOIC-16

8497

Effective Inventory

Image for reference only

Manufacturer Part:

AM26LV31EIDR

Package:

SOIC-16 (9.9 x 6.0 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AM26LV31EIDR is a quad differential line driver from Texas Instruments with ±15 kV IEC ESD protection. Operating from a single 3.3V supply, it meets TIA/EIA-422-B standards, supports up to 32 MHz switching rate, and provides controlled rise/fall times for balanced bus transmission in a 16-pin SOIC package.

Key Specifications

Drivers / Receivers 4 / 0
Protocol RS-422 / RS-485
Supply Voltage 3.0 V to 3.6 V (3.3 V nominal)
Switching Rate Up to 32 MHz
Propagation Delay 8 ns typical
Pulse Skew 500 ps typical
Output Drive Current ±30 mA
Differential Output Voltage 2.6 V typical (100 Ω load)
Rise/Fall Time 5 ns typical (controlled)
ESD Protection ±15 kV HBM, ±8 kV IEC contact, ±15 kV IEC air gap
Operating Temperature -40°C to +85°C
Package SOIC-16 (D)

Features

  • Meets TIA/EIA-422-B and ITU V.11 standards
  • 3.3V single supply operation
  • ±15 kV IEC ESD protection on bus pins
  • 32 MHz maximum switching rate
  • 8 ns typical propagation delay
  • 500 ps typical pulse skew
  • ±30 mA output drive current
  • Controlled 5 ns rise and fall times
  • 5V logic input compatible with 3.3V supply
  • Three-state outputs
  • Glitch-free power-up/power-down
  • Short-circuit protection on driver outputs

Applications

  • RS-422 balanced bus transmission
  • Industrial communication networks
  • Motor encoder interfaces
  • Point-to-point and multidrop data links
  • Backplane transceiver logic
Product Introduction: AM26LV31EIDR Product Introduction

The AM26LV31E is a quad differential line driver with three-state outputs and ±15 kV IEC ESD protection from Texas Instruments. It is designed for balanced bus transmission at switching rates up to 32 MHz, meeting or exceeding TIA/EIA-422-B and ITU V.11 requirements. The driver operates from a single 3.3 V supply while accepting 5 V logic inputs. Features include 8 ns propagation delay, 500 ps pulse skew, ±30 mA output drive, and controlled 5 ns rise/fall times for minimized EMI. The device supports Ioff partial power-down mode operation and provides glitch-free power-up/power-down protection with driver output short-circuit protection.

Working Principle: AM26LV31EIDR Working Principle

The AM26LV31E contains four independent differential line drivers. Each driver accepts a single-ended logic input and produces a complementary pair of output signals (Y and Z) with controlled transition times. When the driver enable is active, the input is converted to a differential current drive of ±30 mA into a balanced load. The controlled 5 ns rise/fall times minimize EMI and reflections on twisted-pair transmission lines. The 3.3 V supply powers an internal reference and bias network that sets the output common-mode voltage and drive current. The three-state outputs go high-impedance when the enable pin is deasserted. The ESD protection clamps on the bus pins absorb transient energy from electrostatic discharge events up to ±15 kV (HBM and IEC air gap) and ±8 kV (IEC contact). The Ioff feature ensures the outputs remain in a known state during partial power-down.

Pin Description: AM26LV31EIDR Pin Definition and Functions
Pin Name Type Description
1 1Y Output Driver 1 non-inverting output
2 1Z Output Driver 1 inverting output
3 2Y Output Driver 2 non-inverting output
4 2Z Output Driver 2 inverting output
5 GND Power Ground
6 3Y Output Driver 3 non-inverting output
7 3Z Output Driver 3 inverting output
8 4Y Output Driver 4 non-inverting output
9 4Z Output Driver 4 inverting output
10 4A Input Driver 4 input
11 3A Input Driver 3 input
12 G Input Enable input (active high)
13 2A Input Driver 2 input
14 1A Input Driver 1 input
15 VCC Power Supply voltage (3.0-3.6V)
16 GND Power Ground
Application Scenarios: In which products and applications is AM26LV31EIDR used
  • Industrial Communication: RS-422 bus transmission up to 32 MHz for high-speed factory automation networks
  • Motor Encoder Interface: Differential driver for transmitting quadrature encoder signals over long cables
  • Multidrop Data Links: ±15 kV ESD protection ensures robustness in multi-node RS-422 networks
  • Backplane Signaling: Controlled 5 ns rise/fall times minimize reflections on PCB backplanes
  • 5V/3.3V Mixed Systems: 5V logic input compatible with 3.3V supply bridges voltage domains
Alternative Models: What chips are recommended as replacements for AM26LV31EIDR
Model Manufacturer Key Difference Package Speed
AM26LV31EIPWR TI TSSOP-16 package option for space-constrained board layouts TSSOP-16 32Mbps
AM26LV31EIRGYR TI VQFN-16 package (4×3.5mm) for minimal footprint ultra-compact designs VQFN-16 32Mbps
SN65LV31DW TI Similar quad RS-422 driver in SOIC-16, 3.3V supply with IEC ESD protection SOIC-16 32Mbps
MC3487DR2G onsemi 5V RS-422 quad driver for legacy 5V systems with separate enable controls SOIC-16 10Mbps
DS26LV31TMX MaxLinear 3.3V RS-422 quad driver with similar pinout and ESD protection rating SOIC-16 32Mbps
SN65HVD31DR TI Enhanced version with ±16kV IEC ESD and extended common-mode range for industrial SOIC-16 32Mbps

The AM26LV31E is a 3.3V quad RS-422 differential line driver with individual driver enables. For 5V systems, the MC3487 provides equivalent functionality. The SN65HVD31 offers enhanced ESD protection for harsh industrial environments.

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1