Opens in a new tab

TLC272ACDR

Dual LinCMOS op-amp, 3-16V, 1.1MHz GBW, RRO, 1pA Ib, SOIC-8

10200

Effective Inventory

Image for reference only

Manufacturer Part:

TLC272ACDR

Package:

SOIC-8 (4.9 x 3.9 x 1.5mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLC272ACDR is a dual single-supply LinCMOS operational amplifier from Texas Instruments with 1.1MHz bandwidth, 3.5V/µs slew rate, rail-to-rail output, and 800µV typical input offset in an SOIC-8 package.

Key Specifications

Number of Amplifiers 2 (dual)
Supply Voltage Range 3V to 16V (single or dual supply)
Input Offset Voltage 800µV typical, 5mV max (A-grade)
Input Bias Current 1pA typical (CMOS input)
Gain-Bandwidth Product 1.1MHz (typical at 5V)
Slew Rate 3.5V/µs (typical at 5V)
Input Common-Mode Range -0.2V to VDD-1.2V
Output Swing Rail-to-rail (within 10mV of VDD at light loads)
Supply Current (per amplifier) 675µA typical at 5V
PSRR 70dB typical
CMRR 70dB typical
Operating Temperature -40°C to +85°C (C-grade)
Package SOIC-8 (3.9 x 4.9mm)

Features

  • Single-supply operation from 3V to 16V
  • Rail-to-rail output swing (within 10mV of rails)
  • Extremely low input bias current: 1pA typical
  • High input impedance CMOS input stage
  • 1.1MHz gain-bandwidth product
  • Internally compensated for unity-gain stability
  • Phase-reversal protection on inputs
  • Direct replacement for LM358 in many applications

Applications

  • Battery-powered instrumentation
  • High-impedance sensor interfaces
  • Photodiode and transimpedance amplifiers
  • Single-supply signal conditioning
  • Portable medical devices
Product Introduction: TLC272ACDR Product Introduction

The TLC272ACDR is a dual LinCMOS operational amplifier from Texas Instruments that combines the low input bias current of CMOS technology with the output drive capability of bipolar amplifiers. The device operates from a single 3V to 16V supply and features rail-to-rail output swing that reaches within 10mV of the supply rails under light loads. The 1pA typical input bias current makes it ideal for high-impedance sensor interfaces. The 1.1MHz gain-bandwidth product and 3.5V/µs slew rate support a wide range of signal conditioning applications. Phase-reversal protection prevents output inversion when the input common-mode range is exceeded. The A-grade offers 800µV typical input offset voltage.

Working Principle: TLC272ACDR Working Principle

The TLC272ACDR uses TI’s LinCMOS process, which combines PMOS input differential pairs with a CMOS output stage. The PMOS input transistors provide the ultra-low 1pA input bias current and very high input impedance, enabling direct connection to high-impedance sensors and capacitive sources. The input common-mode range extends from -0.2V below the negative rail to approximately VDD-1.2V, limited by the tail current source of the differential pair. The gain stage uses a folded-cascode architecture for high gain and wide bandwidth. The output stage is a class-AB CMOS push-pull that swings rail-to-rail, reaching within 10mV of both supply rails at light loads. The internal compensation capacitor provides unity-gain stability with any capacitive load. Phase-reversal protection circuitry prevents the output from changing sign when the input is driven beyond the common-mode range, a common failure mode of older CMOS op-amps. The 675µA per-amplifier supply current reflects the bias current needed to achieve the 1.1MHz GBW.

Pin Description: TLC272ACDR Pin Definition and Functions
Pin Name Type Description
1 1OUT Output Amplifier 1 output
2 1IN- Input Amplifier 1 inverting input
3 1IN+ Input Amplifier 1 non-inverting input
4 GND Power Negative supply or ground
5 2IN+ Input Amplifier 2 non-inverting input
6 2IN- Input Amplifier 2 inverting input
7 2OUT Output Amplifier 2 output
8 VDD Power Positive supply (3V-16V)
Application Scenarios: In which products and applications is TLC272ACDR used
  • High-Impedance Sensors: 1pA input bias current prevents loading of pH electrodes, piezoelectric sensors, and photodiodes
  • Battery Instruments: Single-supply 3V operation and 675µA per amplifier extend battery life in portable devices
  • Photodiode Amps: RRO and low input bias current maximize dynamic range in transimpedance amplifier configurations
  • Signal Conditioning: 1.1MHz GBW supports audio and low-frequency signal processing with adequate loop gain
  • LM358 Upgrade: Pin-compatible with LM358 but with CMOS input, RRO, and much lower input bias current
Alternative Models: What chips are recommended as replacements for TLC272ACDR
Model Manufacturer Key Difference Package Specs
TLC272ACDR TI A-grade version with tighter offset voltage specifications for precision measurement circuits SOIC-8 1.8MHz/A-grade
TLC277CP TI Improved version with lower offset and higher output drive for demanding analog applications DIP-8 1.8MHz/improved
MCP6002-I/SN Microchip 1.8-6V dual rail-to-rail CMOS op-amp with 1MHz GBW for low-voltage signal processing SOIC-8 1MHz/1.8-6V
LM358N TI Bipolar dual op-amp with 3-32V single supply for general-purpose analog signal chains DIP-8 1.1MHz/bipolar
TLV2322IPWR TI Ultra-low-power 20kHz dual CMOS op-amp with 2µA supply for battery monitoring circuits TSSOP-8 20kHz/2µA

TLC272 is a dual CMOS rail-to-rail output op-amp with 1.8MHz GBW and 3-16V supply range. The AC-grade offers tighter offset specifications. For lower-voltage designs, MCP6002 operates down to 1.8V. For ultra-low-power battery applications, TLV2322 draws only 2µA per amplifier. The TLC272 is ideal for single-supply signal conditioning where input common-mode range includes ground.

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1