Opens in a new tab

SN74HC595N

8-bit shift register with latch, 3-state outputs, 78MHz, 2-6V, PDIP-16

16200

Effective Inventory

Image for reference only

Manufacturer Part:

SN74HC595N

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74HC595N is an 8-bit shift register with output latch and 3-state outputs from Texas Instruments, designed for serial-to-parallel data conversion with 78MHz typical shift frequency in a 16-pin PDIP package.

Key Specifications

Function 8-bit shift register with output latch
Shift Frequency 78MHz typical at 4.5V
Supply Voltage 2V to 6V
Output Drive 6mA sink/source at 4.5V
Propagation Delay 13ns typical (clock to Q)
Output Types 3-state (direct and latched)
Serial Output Q7′ for cascading
Shift Register Clear Active low (SRCLR)
Output Enable Active low (OE)
Supply Current 80µA maximum at 6V
Operating Temperature -40°C to +85°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • 8-bit serial-in, parallel-out shift register with output latch
  • 3-state outputs for bus-oriented applications
  • Direct clear of shift register (SRCLR)
  • Output enable for high-impedance state
  • Q7′ cascade output for daisy-chaining multiple devices
  • Separate clock inputs for shift and latch registers
  • Wide 2V to 6V supply voltage range
  • Standard HC CMOS logic levels

Applications

  • LED display driving and multiplexing
  • Expanding MCU output ports
  • Serial-to-parallel data conversion
  • Cascaded register chains
  • Industrial control output expansion
Product Introduction: SN74HC595N Product Introduction

The SN74HC595N is an 8-bit shift register with output latch and 3-state outputs from Texas Instruments in the 74HC CMOS logic family. It provides serial-to-parallel data conversion with two stages: an 8-bit shift register that accepts serial data on the rising edge of the shift register clock (SRCLK), and an 8-bit output latch that captures the shift register contents on the rising edge of the register clock (RCLK). The 3-state outputs can be placed in high-impedance via the output enable (OE) pin. A Q7′ serial output enables daisy-chaining multiple 74HC595 devices for unlimited output expansion. The active-low shift register clear (SRCLR) resets the shift register independently of the output latch. The device operates from 2V to 6V with 78MHz typical shift frequency at 4.5V.

Working Principle: SN74HC595N Working Principle

The SN74HC595N consists of two 8-bit registers: the shift register and the output latch register. Serial data on the SER (DS) input is shifted into the shift register on each rising edge of SRCLK. The data propagates from bit 0 through bit 7, with the bit 7 value appearing on the Q7′ output for cascading to the next device. When RCLK rises, the entire shift register content is transferred simultaneously to the output latch register, updating all 8 outputs (Q0-Q7) at once. This two-stage architecture allows new data to be shifted in while the current output remains stable, preventing flicker in display applications. The SRCLR pin asynchronously clears the shift register to all lows when driven low, but does not affect the output latch, allowing selective clearing. The OE pin controls the 3-state output buffers; when OE is high, all Q0-Q7 outputs are in high-impedance, while the internal latch data and Q7′ remain active. The 6mA output drive capability can directly drive LEDs, relay coils, and other low-current loads without additional buffers.

Pin Description: SN74HC595N Pin Definition and Functions
Pin Name Type Description
1 Q1 3-state Output Latched output bit 1
2 Q2 3-state Output Latched output bit 2
3 Q3 3-state Output Latched output bit 3
4 Q4 3-state Output Latched output bit 4
5 Q5 3-state Output Latched output bit 5
6 Q6 3-state Output Latched output bit 6
7 Q7 3-state Output Latched output bit 7
8 GND Power Ground
9 Q7′ Output Serial cascade output (not latched)
10 SRCLR Input Shift register clear (active low)
11 SRCLK Input Shift register clock (rising edge)
12 RCLK Input Register (latch) clock (rising edge)
13 OE Input Output enable (active low, 3-state control)
14 SER Input Serial data input
15 Q0 3-state Output Latched output bit 0
16 VCC Power Supply voltage (2V-6V)
Application Scenarios: In which products and applications is SN74HC595N used
  • LED Matrix Driving: 3-state outputs and latch prevent flicker; multiple devices cascade to drive 8×8 or larger LED matrices
  • MCU Port Expansion: 3 GPIO pins (SER, SRCLK, RCLK) control 8 or more outputs via serial shift, conserving MCU I/O
  • Seven-Segment Displays: Latch enables simultaneous digit update; OE controls display blanking during multiplexing
  • Industrial Control: 6mA per output drives optocouplers and relay coils; daisy-chain expands to hundreds of channels
  • Serial-to-Parallel: Converts SPI or bit-banged serial data from MCU to parallel control signals for multiple peripherals
Alternative Models: What chips are recommended as replacements for SN74HC595N
Model Manufacturer Key Difference Package Supply
74HC595D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-16 2-6V CMOS
74HC595N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-16 2-6V CMOS
74HCT595D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-16 4.5-5.5V TTL-in
74HCT595N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-16 4.5-5.5V TTL-in
74LVC595D TI/Nexperia Low-voltage CMOS for 1.65-3.6V modern logic with 24mA output drive and bus-hold inputs SOIC-16 1.65-3.6V CMOS
74LVC595N TI/Nexperia Through-hole DIP version of LVC family for prototyping and repair DIP-16 1.65-3.6V CMOS
74AUP595D TI/Nexperia Ultra-low power CMOS with 0.8-3.6V supply for battery-powered and mobile applications SOIC-16 0.8-3.6V CMOS
74AUP595N TI/Nexperia Through-hole DIP version of AUP family for prototyping and repair DIP-16 0.8-3.6V CMOS

The 74595 is a 8-Bit Shift Register with Output Latches and 3-State Output. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1