Opens in a new tab

CD4060BE

14-stage binary counter with oscillator, 10 outputs, 3-15V, PDIP-16

9300

Effective Inventory

Image for reference only

Manufacturer Part:

CD4060BE

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CD4060BE is a 14-stage ripple carry binary counter/divider and oscillator from Texas Instruments with on-chip oscillator, 10 buffered outputs, and 3V to 15V supply in a 16-pin PDIP package.

Key Specifications

Counter Stages 14 (Q4-Q10, Q11-Q14 available)
Available Outputs 10 (Q4-Q14, divide by 16 to 16384)
Maximum Clock Frequency 8MHz at 10V, 3MHz at 5V
Supply Voltage 3V to 15V
Oscillator Type RC or crystal (built-in)
Input Current 1µA typical at 10V
Quiescent Current 5µA typical at 5V
Reset Input Active high (MR), clears all stages
Output Drive 1.3mA sink/source at 5V
Operating Temperature -55°C to +125°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • 14-stage binary ripple counter with on-chip oscillator
  • 10 buffered counter outputs (divide by 2^4 to 2^14)
  • Internal oscillator configurable as RC or crystal
  • Master reset (MR) clears all counter stages
  • Wide supply range: 3V to 15V
  • Very low quiescent current: 5µA at 5V
  • Military temperature range: -55°C to +125°C
  • Outputs Q1, Q2, Q3 not available externally

Applications

  • Long-duration timers and time delays
  • Frequency dividers and sub-clock generators
  • Crystal oscillator with divided outputs
  • LED flasher circuits (1Hz range)
  • Low-frequency clock generation
Product Introduction: CD4060BE Product Introduction

The CD4060BE from Texas Instruments is a 14-stage ripple carry binary counter with a built-in oscillator section. It combines a CMOS oscillator (configurable as RC or crystal) with a 14-bit binary counter, providing 10 buffered outputs at division ratios from 2^4 (16) to 2^14 (16384). The first three counter stages (Q1, Q2, Q3) are not externally accessible, meaning the lowest available division is 16. The internal oscillator requires only two external resistors and one capacitor for RC mode, or a 32.768kHz crystal with two capacitors for precision timing. The master reset (MR) pin clears all counter stages asynchronously. With a typical quiescent current of only 5µA at 5V and military temperature range, the CD4060 is ideal for battery-powered timing applications.

Working Principle: CD4060BE Working Principle

The CD4060BE consists of two sections: the oscillator and the binary counter. The oscillator section contains two inverters that can be configured as either an RC oscillator or a Pierce crystal oscillator. In RC mode, the oscillation frequency is approximately f = 1/(2.2 × R1 × C), where R1 is the series resistor and C is the timing capacitor. In crystal mode, a 32.768kHz crystal connected between pins 10 and 11 provides a precise timebase with two load capacitors. The oscillator output drives the first stage of the 14-bit ripple counter. Each counter stage divides by 2, creating outputs at f/2^n where n is the stage number. Since Q1, Q2, and Q3 are not pinned out, the available outputs start at Q4 (f/16) through Q14 (f/16384). With a 32.768kHz crystal, Q14 provides a precise 2Hz output. The counter advances on the negative-going edge of each stage. The master reset (MR) pin, when driven high, asynchronously resets all 14 counter stages to zero and disables the oscillator, stopping all outputs.

Pin Description: CD4060BE Pin Definition and Functions
Pin Name Type Description
1 Q12 Output Counter output stage 12 (f/4096)
2 Q13 Output Counter output stage 13 (f/8192)
3 Q14 Output Counter output stage 14 (f/16384)
4 Q6 Output Counter output stage 6 (f/64)
5 Q5 Output Counter output stage 5 (f/32)
6 Q7 Output Counter output stage 7 (f/128)
7 Q4 Output Counter output stage 4 (f/16)
8 VSS Power Ground
9 Q8 Output Counter output stage 8 (f/256)
10 OSC1 Oscillator Oscillator input (crystal or RC)
11 OSC2 Oscillator Oscillator output (crystal or RC)
12 RS Oscillator Oscillator resistor connection
13 Q9 Output Counter output stage 9 (f/512)
14 Q10 Output Counter output stage 10 (f/1024)
15 MR Input Master reset (active high, clears all stages)
16 VDD Power Supply voltage (3V-15V)
Application Scenarios: In which products and applications is CD4060BE used
  • Long-Delay Timers: 14-bit counter divides clock by up to 16384, creating delays from seconds to days with a single IC
  • LED Flashers: 32.768kHz crystal with Q14 output produces 2Hz flash rate; Q13 gives 4Hz, Q12 gives 8Hz
  • Sub-Clock Generation: Crystal oscillator divided outputs provide precise 1Hz, 2Hz, 4Hz reference clocks
  • Frequency Division: 10 outputs at binary division ratios replace multiple flip-flop divider stages
  • Battery-Powered Timers: 5µA quiescent current and 3V minimum supply enable long-running coin-cell timing circuits
Alternative Models: What chips are recommended as replacements for CD4060BE
Model Manufacturer Key Difference Package Voltage
CD4060BM TI SOIC-16 surface-mount version with identical oscillator and counter functions SOIC-16 3-18V
HEF4060BT NXP Pin-compatible CMOS version with improved ESD protection and wider temperature range SOIC-16 3-15V
MC14060BDR2G onsemi Pin-compatible equivalent with RoHS compliance and automotive-grade screening available SOIC-16 3-18V
74HC4060D NXP HC CMOS version with 2-6V supply and higher speed oscillator (60MHz vs 6MHz at 5V) SOIC-16 2-6V
74VHC4060M onsemi VHC version with 2-6V supply, very high speed and low power consumption SOIC-16 2-6V
74HCT4060D NXP HCT version with TTL-compatible input levels for mixed 5V/3.3V logic systems SOIC-16 4.5-5.5V

The CD4060BE combines a 14-stage ripple-carry binary counter with an internal oscillator (requires external RC or crystal). HC/VHC versions offer significantly higher oscillator frequency but narrower voltage range. DIP-16 through-hole versions use the BE suffix (TI) or BT suffix (NXP).

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1