Opens in a new tab

EM4095HMSO16B+

125kHz RFID AFE transceiver, integrated PLL, OOK/AM, 1µA sleep, TSSOP-16

3200

Effective Inventory

Image for reference only

Manufacturer Part:

EM4095HMSO16B+

Package:

TSSOP-16 (5.0 x 4.4 x 1.0mm, 0.65mm pitch)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The EM4095HMSO16B+ is a 125kHz RFID analog front-end transceiver IC from EM Microelectronic with integrated PLL, OOK modulation, and AM demodulation in a TSSOP-16 package.

Key Specifications

Carrier Frequency 100kHz to 150kHz (PLL self-adaptive)
Supply Voltage 3.5V to 5.5V
Supply Current 6mA typical (active), 1µA (sleep)
Modulation (TX) OOK (100%) or adjustable AM index
Demodulation (RX) AM demodulation with external filtering
Antenna Drive Bridge driver (direct antenna drive)
Crystal Required No (integrated PLL, no external quartz)
Compatible Transponders EM4102, EM4200, EM4450, EM4205/EM4305
Sleep Mode Current 1µA typical
Operating Temperature -40°C to +85°C
Package TSSOP-16

Features

  • Integrated PLL self-adapts to antenna resonant frequency
  • No external quartz crystal required
  • 100-150kHz carrier frequency range for 125kHz RFID
  • Direct antenna drive via integrated bridge drivers
  • OOK and adjustable-index AM modulation for read/write
  • AM demodulation of transponder backscatter signal
  • 1µA sleep mode for battery-powered readers
  • USB-compatible supply voltage range (3.5-5.5V)

Applications

  • 125kHz RFID reader basestations
  • Car immobilizer systems
  • Handheld RFID readers
  • Animal identification readers
  • Access control systems
Product Introduction: EM4095HMSO16B+ Product Introduction

The EM4095HMSO16B+ is a CMOS integrated transceiver from EM Microelectronic designed for 125kHz RFID basestation applications. It combines antenna driving, AM modulation for writable transponders, and AM demodulation of transponder backscatter in a single IC. The integrated PLL system self-adapts the carrier frequency to the antenna resonant frequency, eliminating the need for an external quartz crystal. Bridge drivers directly drive the antenna coil without external power transistors. For read/write operation, OOK (100% modulation) or adjustable-index AM modulation is supported. The demodulated output is presented as a digital signal to the MCU. The 1µA sleep mode extends battery life in portable readers. The HMSO16B+ suffix denotes the TSSOP-16 package with tape-and-reel packaging.

Working Principle: EM4095HMSO16B+ Working Principle

The EM4095HMSO16B+ operates as a complete 125kHz RFID analog front end. The internal PLL locks the carrier frequency to the antenna resonant frequency, which is determined by the external antenna LC circuit. The bridge driver outputs (ANT1/ANT2) generate a 125kHz differential signal that drives the antenna coil, creating the magnetic field that powers passive transponders. For writing to transponders, the MOD pin controls the modulation: setting MOD high switches one bridge driver leg off, creating OOK (100% amplitude modulation) that the transponder detects. For adjustable modulation index, the single-ended driver mode reduces the field by a controlled amount. The transponder responds by modulating its load, which appears as a small AM signal on the antenna voltage. The EM4095 samples this signal through DEMOD_IN, performs envelope detection and filtering with external capacitors, and presents the demodulated data on DEMOD_OUT. The RDY/CLK output provides a clock synchronized to the carrier for the MCU to sample the demodulated data. The SHD (shutdown) pin puts the device into 1µA sleep mode. The CDEC_IN/CDEC_OUT pins connect an external decoupling capacitor for the internal voltage regulator.

Pin Description: EM4095HMSO16B+ Pin Definition and Functions
Pin Name Type Description
1 DC2 Power Internal regulator decoupling capacitor 2
2 VSS Power Ground
3 RDY/CLK Output Ready/clock output for MCU synchronization
4 FCAP Analog Filter capacitor for PLL
5 SHD Input Shutdown control (high=sleep, 1µA)
6 ANT1 Output Antenna bridge driver output 1
7 DEMOD_OUT Output Demodulated data output to MCU
8 DVDD Power Digital supply (3.5-5.5V)
9 MOD Input Modulation control input (high=OOK modulation)
10 DVSS Power Digital ground
11 ANT2 Output Antenna bridge driver output 2
12 AGND Power Analog ground
13 CDEC_IN Analog Internal regulator decoupling (to CDEC_OUT)
14 VDD Power Supply (3.5-5.5V)
15 CDEC_OUT Analog Internal regulator decoupling (to CDEC_IN)
16 DEMOD_IN Input Demodulation input (from antenna via RC network)
Application Scenarios: In which products and applications is EM4095HMSO16B+ used
  • Car Immobilizer: 1µA sleep current and 5V supply compatibility suit always-on key detection in vehicle security
  • Handheld Readers: Integrated PLL and bridge drivers minimize external components; 6mA active current preserves battery
  • Animal ID: Compatible with EM4200/EM4305 animal transponder protocols at 134.2kHz (shifted)
  • Access Control: Read/write capability supports EM4450 and EM4305 for card personalization
  • Low-Cost Readers: No external quartz and direct antenna drive reduce BOM to antenna, capacitors, and MCU
Alternative Models: What chips are recommended as replacements for EM4095HMSO16B+
Model Manufacturer Key Difference Package Specs
EM4095SO16B EM Microelectronic Same in SOIC-16 package – –
U2270B Microchip/Atmel Legacy 125kHz reader IC, fewer features – –
RI-STU25A TI 125kHz reader module (not bare IC) – –
TMS3705A TI RFID transponder base station IC – –
NCA1-125K NXP 125kHz reader IC with integrated MCU – –

EM4095HMSO16B+ is a 125-134kHz RFID reader AFE from EM Microelectronic in SOIC-16. The EM4325 integrates reader + transponder functionality. The TMS3705A from TI provides 134.2kHz FDX-B reader with BPSK demodulation. The ATA5575 from Microchip offers 125kHz reader/transponder with read/write capability. For 13.56MHz HF RFID, MFRC522 from NXP provides ISO 14443 A/B reader. The AS3935 from ams-OSRAM offers lightning detection rather than RFID but uses similar AFE architecture. The EM4095P16B+ provides the same in DIP-16 through-hole package.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1