Opens in a new tab

NE555DR

Precision timer, astable/monostable, 4.5-16V, 200mA out, SOIC-8

28000

Effective Inventory

Image for reference only

Manufacturer Part:

NE555DR

Package:

SOIC-8 (4.9 x 3.91 x 1.58mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NE555DR is a precision timer IC from Texas Instruments capable of producing accurate time delays or oscillation in astable and monostable modes, in an SOIC-8 package.

Key Specifications

Supply Voltage 4.5V to 16V
Output Current (Sink/Source) 200mA / 200mA
Timing Accuracy 1% typical (monostable)
Timing Range Microseconds to hours
Trigger Voltage 1/3 VCC
Threshold Voltage 2/3 VCC
Control Voltage 2/3 VCC (internal divider tap)
Reset Threshold 0.7V (active low)
Max Frequency (Astable) >500kHz typical
Rise/Fall Time 100ns / 100ns typical
Operating Temperature 0°C to +70°C
Package SOIC-8 (4.9 x 3.91mm)

Features

  • Precision timing from microseconds to hours
  • Astable (free-running) and monostable (one-shot) modes
  • Adjustable duty cycle in astable mode
  • 200mA output source and sink capability
  • Internal resistor divider sets 1/3 and 2/3 VCC thresholds
  • Reset pin overrides all other inputs
  • Control voltage pin for modulation
  • Directly drives relays, lamps, and speakers

Applications

  • Timer and delay circuits
  • Pulse generation and width modulation
  • LED flasher and beacon circuits
  • Tone and alarm generators
  • DC-DC converter oscillator
Product Introduction: NE555DR Product Introduction

The NE555DR from Texas Instruments is the classic precision timer IC that has been a staple of electronic design since 1972. It can be configured as a monostable (one-shot) timer producing a single pulse of defined width, or as an astable (free-running) oscillator producing a continuous square wave. The internal architecture consists of two comparators, a flip-flop, a discharge transistor, and a resistive voltage divider that sets the trigger level at 1/3 VCC and the threshold level at 2/3 VCC. The 200mA output stage can directly drive relays, lamps, small motors, and speakers without external transistors. Timing is determined by external resistors and capacitors, providing flexibility from microseconds to hours. The DR suffix denotes the SOIC-8 package with tape-and-reel packaging.

Working Principle: NE555DR Working Principle

The NE555DR operates based on three internal 5kΩ resistors forming a voltage divider that sets reference voltages at 1/3 VCC (trigger comparator) and 2/3 VCC (threshold comparator). In monostable mode, the trigger pin (pin 2) is normally held above 1/3 VCC. When a falling edge pulls the trigger below 1/3 VCC, the trigger comparator sets the internal flip-flop, driving the output HIGH and turning off the discharge transistor. The external timing capacitor (connected to pin 6/7) charges through the timing resistor. When the capacitor voltage reaches 2/3 VCC, the threshold comparator resets the flip-flop, driving the output LOW and turning on the discharge transistor to rapidly discharge the capacitor. The output pulse width is T = 1.1 × R × C. In astable mode, the capacitor charges through R1+R2 and discharges through R2 only. The charge time (output HIGH) is T_H = 0.693 × (R1+R2) × C, and the discharge time (output LOW) is T_L = 0.693 × R2 × C. The frequency is f = 1.44 / ((R1 + 2×R2) × C), and the duty cycle is (R1+R2)/(R1+2×R2). The control voltage pin (pin 5) provides access to the 2/3 VCC node; applying a voltage here modulates the threshold and trigger levels, enabling pulse-width modulation or frequency modulation.

Pin Description: NE555DR Pin Definition and Functions
Pin Name Type Description
1 GND Power Ground
2 TRIG Input Trigger (active below 1/3 VCC starts output)
3 OUT Output Output (200mA sink/source)
4 RESET Input Reset (active low, overrides all)
5 CTRL I/O Control voltage (2/3 VCC tap, bypass with 0.01µF)
6 THRESH Input Threshold (above 2/3 VCC ends timing)
7 DISCH Output Discharge (open-collector, for timing cap)
8 VCC Power Supply (4.5V to 16V)

NE555DR uses the SOIC-8 (D) surface-mount package with the standard 555 timer pinout: Pin 1 = GND, Pin 2 = TRIG, Pin 3 = OUT, Pin 4 = RESET, Pin 5 = CTRL, Pin 6 = THR, Pin 7 = DISCH, Pin 8 = VCC. The DR suffix denotes SOIC-8 tape-and-reel from TI. The pinout is identical to the PDIP-8 version (NE555P), enabling seamless PCB layout migration between through-hole and surface-mount. The CTRL pin (Pin 5) is at 2/3 VCC internally — adding an external voltage to this pin modulates the threshold and trigger levels for pulse-width modulation. For CMOS low-power version, TLC555DR provides 1.5-15V operation with only 170µA supply current.

Application Scenarios: In which products and applications is NE555DR used
  • Monostable Timer: Push-button trigger creates a fixed-width pulse for relay hold, LED timeout, or debounced output
  • Astable Oscillator: R-C network sets frequency for LED flasher, tone generator, or clock source
  • PWM Controller: Control voltage pin modulates threshold for motor speed or LED brightness control
  • DC-DC Oscillator: 200mA output directly drives small flyback or boost converter switching transistor
  • Schmitt Trigger: With TRIG and THRESH tied together, functions as an inverting Schmitt trigger with 1/3 VCC hysteresis
Alternative Models: What chips are recommended as replacements for NE555DR
Model Manufacturer Key Difference Package Specs
LM555CN TI Direct equivalent with identical timing characteristics and wider -40 to +85C temperature range DIP-8 4.5-16V/200mA
TLC555CP TI CMOS version with 2-15V supply, 1µA typical supply current for battery-powered timers DIP-8 2-15V/100mA CMOS
SA555P TI Automotive-grade -40 to +125C version for under-hood timer and control applications DIP-8 4.5-16V/-40-125C
NA555P TI Wide-temperature -40 to +125C version with military-grade screening for reliability DIP-8 4.5-16V/-40-125C
NE556N TI Dual timer version with two independent 555 timers in a single DIP-14 package DIP-14 4.5-16V/dual
LMC555CN TI CMOS low-power version with 1.5V minimum supply and 2MHz astable frequency capability DIP-8 1.5-15V/100mA

NE555 is the industry-standard precision timer generating accurate time delays from microseconds to hours. It operates in both astable (oscillator) and monostable (one-shot) modes. CMOS versions (TLC555, LMC555) offer 2-15V supply and 1µA standby for battery applications. The NE556 provides dual timers in DIP-14. SA555 extends temperature range to 125C for automotive use.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1