Opens in a new tab

CD4093BE

Quad NAND Schmitt trigger, 3-18V, hysteresis, CMOS, PDIP-14

12000

Effective Inventory

Image for reference only

Manufacturer Part:

CD4093BE

Package:

PDIP-14 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CD4093BE is a quad 2-input NAND Schmitt trigger from Texas Instruments, combining NAND logic with hysteresis for noise immunity in a 14-pin PDIP package.

Key Specifications

Number of Gates 4 (quad 2-input NAND Schmitt trigger)
Logic Family CD4000B CMOS
Supply Voltage Range 3V to 18V
Hysteresis Voltage (VT+ – VT-) 0.9V typical @ 5V, 2.3V typical @ 10V
VT+ (Positive Threshold) 2.9V typical @ 5V
VT- (Negative Threshold) 2.0V typical @ 5V
Propagation Delay 200ns typical @ 5V
Output Drive ±1.5mA @ 5V, ±3.4mA @ 10V
Quiescent Current 2µA max @ 5V
Operating Temperature -55°C to +125°C
Package PDIP-14 (19.3 x 6.35mm)

Features

  • Four independent 2-input NAND gates with Schmitt trigger inputs
  • Wide supply range: 3V to 18V
  • Schmitt trigger hysteresis for noise immunity
  • Can be used as 2-input NAND or single-input inverter (tie inputs together)
  • Ideal for signal conditioning and waveform shaping
  • Low quiescent current: 2µA max at 5V

Applications

  • Switch debouncing and signal conditioning
  • Oscillator and timer circuits
  • Slow input edge conditioning
  • Noise rejection on digital inputs
  • Pulse shaping and squaring circuits
Product Introduction: CD4093BE Product Introduction

The CD4093BE from Texas Instruments consists of four 2-input NAND gates, each with Schmitt trigger inputs. The Schmitt trigger action provides different threshold voltages for the positive-going (VT+) and negative-going (VT-) input transitions, creating a hysteresis window that makes the gates highly immune to noise on slowly changing or noisy input signals. At 5V supply, the typical hysteresis is 0.9V (VT+ ≈ 2.9V, VT- ≈ 2.0V). This means the output only changes state when the input crosses the upper threshold (rising) or lower threshold (falling), ignoring noise within the hysteresis band. The device can function as a 2-input NAND gate or as a Schmitt trigger inverter by tying both inputs together. The 3V to 18V supply range makes it compatible with both 5V logic and higher-voltage industrial systems. The E suffix denotes the PDIP-14 plastic through-hole package.

Working Principle: CD4093BE Working Principle

Each gate in the CD4093BE combines a 2-input NAND function with a Schmitt trigger input stage. The NAND logic works the same as a standard 2-input NAND gate: the output is LOW only when both inputs are HIGH. The Schmitt trigger adds hysteresis to each input: the input must rise above VT+ (positive-going threshold) to be recognized as HIGH, and must fall below VT- (negative-going threshold) to be recognized as LOW. Between VT- and VT+, the output maintains its previous state. This hysteresis eliminates output oscillation or multiple transitions that would occur with slowly rising/falling inputs or noisy signals. For a mechanical switch connected to an input through a pull-up resistor, the contact bounce creates multiple fast transitions that a standard gate would pass through to the output; the Schmitt trigger’s hysteresis absorbs these bounces and produces a single clean output transition. When both inputs of a gate are tied together, the gate functions as a Schmitt trigger inverter (NOT gate with hysteresis). Two such gates with an RC feedback network create a simple oscillator: the capacitor charges through the resistor until reaching VT+, then the output goes LOW and the capacitor discharges through the resistor until reaching VT-, and the cycle repeats.

Pin Description: CD4093BE Pin Definition and Functions
Pin Name Type Description
1 1A Input Gate 1 input A (Schmitt trigger)
2 1B Input Gate 1 input B (Schmitt trigger)
3 1Y Output Gate 1 output (NAND)
4 2A Input Gate 2 input A (Schmitt trigger)
5 2B Input Gate 2 input B (Schmitt trigger)
6 2Y Output Gate 2 output (NAND)
7 VSS Power Ground
8 3Y Output Gate 3 output (NAND)
9 3A Input Gate 3 input A (Schmitt trigger)
10 3B Input Gate 3 input B (Schmitt trigger)
11 4Y Output Gate 4 output (NAND)
12 4A Input Gate 4 input A (Schmitt trigger)
13 4B Input Gate 4 input B (Schmitt trigger)
14 VDD Power Supply (3V to 18V)
Application Scenarios: In which products and applications is CD4093BE used
  • Switch Debounce: Direct connection from mechanical switch through pull-up to Schmitt input; hysteresis absorbs bounce
  • RC Oscillator: Two gates with R-C feedback form a simple square-wave oscillator; frequency = 1/(0.5×R×C) approx
  • Signal Conditioning: Convert slowly-varying analog signals (sensors, photodiodes) to clean digital levels
  • Noise Gating: Reject noise pulses smaller than the hysteresis window (0.9V at 5V) on digital input lines
  • Level Detection: Use as comparator with built-in hysteresis; adjust thresholds via supply voltage scaling
Alternative Models: What chips are recommended as replacements for CD4093BE
Model Manufacturer Key Difference Package Supply
CD4093BM TI SOIC-14 surface-mount version with identical logic function and 3-18V range SOIC-14 3-18V
CD4093BE TI Through-hole DIP version for prototyping and legacy board repair DIP-14 3-18V
HEF4093BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-14 3-15V
MC144093BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-14 3-18V
74HC132D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-14 2-6V
74HC132N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-14 2-6V
74HCT132D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-14 4.5-5.5V

CD4093 is the CMOS 4000-series quad 2-input nand schmitt trigger operating over the wide 3-18V supply range. The HEF4093 (NXP) and MC144093 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC132 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1